[U-Boot] [PATCH 5/5] doc: rockchip: use idbloader.img for rk3399

[Kever Yang]

On 2019/8/24 上午1:29, Matwey V. Kornilov wrote:
> Makefile now produces ready-to-deploy idbloader.img file.
>
> u-boot has support for TPL at rk3399 platform for all boards,
> so there is not reason to refer binary loaders.
>
> Signed-off-by: Matwey V. Kornilov <matwey.kornilov at gmail.com>
> ---
>   doc/README.rockchip | 6 ------
>   1 file changed, 6 deletions(-)
>
> diff --git a/doc/README.rockchip b/doc/README.rockchip
> index 401dc19d91..b5311adcd8 100644
> --- a/doc/README.rockchip
> +++ b/doc/README.rockchip
> @@ -324,12 +324,6 @@ To write an image that boots from an SD card (assumed to be /dev/sdc):
>   
>   Option 1: Package the image with Rockchip miniloader:
>   
> -  - Create idbloader.img
> -
> -    => cd /path/to/u-boot
> -    => ./tools/mkimage  -n rk3399 -T rksd -d /path/to/rkbin/bin/rk33/rk3399_ddr_800MHz_v1.20.bin idbloader.img
> -    => cat /path/to/rkbin/bin/rk33/rk3399_miniloader_v1.19.bin >> idbloader.img
> -
>     - Write idbloader.img at 64 sector
This is create idbloader from rkbin, it should not be update since it's 
not U-Boot target,
you should update below description for rk3399 instead:
474 Option 3: Package the image with TPL:
475
476   - Prefix rk3399 header to TPL image
477
478     => cd /path/to/u-boot
479     => ./tools/mkimage -n rk3399 -T rksd -d tpl/u-boot-tpl-dtb.bin out
480
481   - Concatinate tpl with spl
482
483     => cd /path/to/u-boot
484     => cat ./spl/u-boot-spl-dtb.bin >> out

Thanks,
- Kever
>   
>       => sudo dd if=idbloader.img of=/dev/sdc seek=64