[U-Boot] [PATCH v1 1/7] dm: regulator: support regulator more state
Lukasz Majewski
lukma at denx.de
Wed Sep 4 10:19:04 UTC 2019
On Wed, 4 Sep 2019 15:08:21 +0800
Elaine Zhang <zhangqing at rock-chips.com> wrote:
> From: Joseph Chen <chenjh at rock-chips.com>
>
> support parse regulator standard property:
> regulator-off-in-suspend;
> regulator-init-microvolt;
> regulator-suspend-microvolt:
> regulator_get_suspend_enable
> regulator_set_suspend_enable
> regulator_get_suspend_value
> regulator_set_suspend_value
>
> Signed-off-by: Joseph Chen <chenjh at rock-chips.com>
> Signed-off-by: Elaine Zhang <zhangqing at rock-chips.com>
> ---
> drivers/power/regulator/regulator-uclass.c | 67
You add the code to the uclass (regulator-uclass.c). By default such
change shall be covered by sandbox tests.
Please provide tests for functions which you introduce.
As an example:
https://patchwork.ozlabs.org/patch/1121329/
> ++++++++++++++++++++++++++++++ include/power/regulator.h
> | 42 +++++++++++++++++++ 2 files changed, 109 insertions(+)
>
> diff --git a/drivers/power/regulator/regulator-uclass.c
> b/drivers/power/regulator/regulator-uclass.c index
> 76be95bcd159..972a5b210c3c 100644 ---
> a/drivers/power/regulator/regulator-uclass.c +++
> b/drivers/power/regulator/regulator-uclass.c @@ -77,6 +77,33 @@ int
> regulator_set_value(struct udevice *dev, int uV) return ret;
> }
>
> +int regulator_set_suspend_value(struct udevice *dev, int uV)
> +{
> + const struct dm_regulator_ops *ops = dev_get_driver_ops(dev);
> + struct dm_regulator_uclass_platdata *uc_pdata;
> +
> + uc_pdata = dev_get_uclass_platdata(dev);
> + if (uc_pdata->min_uV != -ENODATA && uV < uc_pdata->min_uV)
> + return -EINVAL;
> + if (uc_pdata->max_uV != -ENODATA && uV > uc_pdata->max_uV)
> + return -EINVAL;
> +
> + if (!ops || !ops->set_suspend_value)
> + return -ENOSYS;
> +
> + return ops->set_suspend_value(dev, uV);
> +}
> +
> +int regulator_get_suspend_value(struct udevice *dev)
> +{
> + const struct dm_regulator_ops *ops = dev_get_driver_ops(dev);
> +
> + if (!ops || !ops->get_suspend_value)
> + return -ENOSYS;
> +
> + return ops->get_suspend_value(dev);
> +}
> +
> /*
> * To be called with at most caution as there is no check
> * before setting the actual voltage value.
> @@ -170,6 +197,26 @@ int regulator_set_enable_if_allowed(struct
> udevice *dev, bool enable) return ret;
> }
>
> +int regulator_set_suspend_enable(struct udevice *dev, bool enable)
> +{
> + const struct dm_regulator_ops *ops = dev_get_driver_ops(dev);
> +
> + if (!ops || !ops->set_suspend_enable)
> + return -ENOSYS;
> +
> + return ops->set_suspend_enable(dev, enable);
> +}
> +
> +int regulator_get_suspend_enable(struct udevice *dev)
> +{
> + const struct dm_regulator_ops *ops = dev_get_driver_ops(dev);
> +
> + if (!ops || !ops->get_suspend_enable)
> + return -ENOSYS;
> +
> + return ops->get_suspend_enable(dev);
> +}
> +
> int regulator_get_mode(struct udevice *dev)
> {
> const struct dm_regulator_ops *ops = dev_get_driver_ops(dev);
> @@ -235,6 +282,11 @@ int regulator_autoset(struct udevice *dev)
> int ret = 0;
>
> uc_pdata = dev_get_uclass_platdata(dev);
> +
> + ret = regulator_set_suspend_enable(dev,
> uc_pdata->suspend_on);
> + if (!ret && uc_pdata->suspend_on)
> + ret = regulator_set_suspend_value(dev,
> uc_pdata->suspend_uV); +
> if (!uc_pdata->always_on && !uc_pdata->boot_on)
> return -EMEDIUMTYPE;
>
> @@ -243,6 +295,8 @@ int regulator_autoset(struct udevice *dev)
>
> if (uc_pdata->flags & REGULATOR_FLAG_AUTOSET_UV)
> ret = regulator_set_value(dev, uc_pdata->min_uV);
> + if (uc_pdata->init_uV > 0)
> + ret = regulator_set_value(dev, uc_pdata->init_uV);
> if (!ret && (uc_pdata->flags & REGULATOR_FLAG_AUTOSET_UA))
> ret = regulator_set_current(dev, uc_pdata->min_uA);
>
> @@ -363,6 +417,7 @@ static int regulator_post_bind(struct udevice
> *dev) static int regulator_pre_probe(struct udevice *dev)
> {
> struct dm_regulator_uclass_platdata *uc_pdata;
> + ofnode node;
>
> uc_pdata = dev_get_uclass_platdata(dev);
> if (!uc_pdata)
> @@ -373,6 +428,8 @@ static int regulator_pre_probe(struct udevice
> *dev) -ENODATA);
> uc_pdata->max_uV = dev_read_u32_default(dev,
> "regulator-max-microvolt", -ENODATA);
> + uc_pdata->init_uV = dev_read_u32_default(dev,
> "regulator-init-microvolt",
> + -ENODATA);
> uc_pdata->min_uA = dev_read_u32_default(dev,
> "regulator-min-microamp", -ENODATA);
> uc_pdata->max_uA = dev_read_u32_default(dev,
> "regulator-max-microamp", @@ -382,6 +439,16 @@ static int
> regulator_pre_probe(struct udevice *dev) uc_pdata->ramp_delay =
> dev_read_u32_default(dev, "regulator-ramp-delay", 0);
>
> + node = dev_read_subnode(dev, "regulator-state-mem");
> + if (ofnode_valid(node)) {
> + uc_pdata->suspend_on = !ofnode_read_bool(node,
> "regulator-off-in-suspend");
> + if (ofnode_read_u32(node,
> "regulator-suspend-microvolt", &uc_pdata->suspend_uV))
> + uc_pdata->suspend_uV = uc_pdata->max_uA;
> + } else {
> + uc_pdata->suspend_on = true;
> + uc_pdata->suspend_uV = uc_pdata->max_uA;
> + }
> +
> /* Those values are optional (-ENODATA if unset) */
> if ((uc_pdata->min_uV != -ENODATA) &&
> (uc_pdata->max_uV != -ENODATA) &&
> diff --git a/include/power/regulator.h b/include/power/regulator.h
> index 6c6e2cd4f996..64c5108950a0 100644
> --- a/include/power/regulator.h
> +++ b/include/power/regulator.h
> @@ -168,6 +168,7 @@ struct dm_regulator_uclass_platdata {
> int mode_count;
> int min_uV;
> int max_uV;
> + int init_uV;
> int min_uA;
> int max_uA;
> unsigned int ramp_delay;
> @@ -177,6 +178,8 @@ struct dm_regulator_uclass_platdata {
> int flags;
> u8 ctrl_reg;
> u8 volt_reg;
> + bool suspend_on;
> + u32 suspend_uV;
> };
>
> /* Regulator device operations */
> @@ -192,6 +195,8 @@ struct dm_regulator_ops {
> */
> int (*get_value)(struct udevice *dev);
> int (*set_value)(struct udevice *dev, int uV);
> + int (*set_suspend_value)(struct udevice *dev, int uV);
> + int (*get_suspend_value)(struct udevice *dev);
>
> /**
> * The regulator output current function calls operates on a
> micro Amps. @@ -216,6 +221,8 @@ struct dm_regulator_ops {
> */
> int (*get_enable)(struct udevice *dev);
> int (*set_enable)(struct udevice *dev, bool enable);
> + int (*set_suspend_enable)(struct udevice *dev, bool enable);
> + int (*get_suspend_enable)(struct udevice *dev);
>
> /**
> * The 'get/set_mode()' function calls should operate on a
> driver- @@ -262,6 +269,23 @@ int regulator_get_value(struct udevice
> *dev); int regulator_set_value(struct udevice *dev, int uV);
>
> /**
> + * regulator_set_suspend_value: set the suspend microvoltage value
> of a given regulator.
> + *
> + * @dev - pointer to the regulator device
> + * @uV - the output suspend value to set [micro Volts]
> + * @return - 0 on success or -errno val if fails
> + */
> +int regulator_set_suspend_value(struct udevice *dev, int uV);
> +
> +/**
> + * regulator_get_suspend_value: get the suspend microvoltage value
> of a given regulator.
> + *
> + * @dev - pointer to the regulator device
> + * @return - positive output value [uV] on success or negative errno
> if fail.
> + */
> +int regulator_get_suspend_value(struct udevice *dev);
> +
> +/**
> * regulator_set_value_force: set the microvoltage value of a given
> regulator
> * without any min-,max condition check
> *
> @@ -317,6 +341,24 @@ int regulator_set_enable(struct udevice *dev,
> bool enable); int regulator_set_enable_if_allowed(struct udevice
> *dev, bool enable);
> /**
> + * regulator_set_suspend_enable: set regulator suspend enable state
> + *
> + * @dev - pointer to the regulator device
> + * @enable - set true or false
> + * @return - 0 on success or -errno val if fails
> + */
> +int regulator_set_suspend_enable(struct udevice *dev, bool enable);
> +
> +
> +/**
> + * regulator_get_suspend_enable: get regulator suspend enable state
> + *
> + * @dev - pointer to the regulator device
> + * @return - 0 on success or -errno val if fails
> + */
> +int regulator_get_suspend_enable(struct udevice *dev);
> +
> +/**
> * regulator_get_mode: get active operation mode id of a given
> regulator *
> * @dev - pointer to the regulator device
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190904/081f44b1/attachment.sig>
More information about the U-Boot
mailing list