[U-Boot] [PATCH 1/1] MTD: SPI: revert removing SST26* flash IC protection ops
Eugeniy Paltsev
Eugeniy.Paltsev at synopsys.com
Wed Sep 4 18:07:41 UTC 2019
Commit c4e8862308d4 (mtd: spi: Switch to new SPI NOR framework)
performs switch from previous 'spi_flash' infrastructure without
proper testing/investigations which results in regressions.
Fix regression related to SST26 flash IC series which is lacking
protection ops implementation which were introduced previously by
Commit 3d4fed87a5fa (mtd: sf: Add support of sst26wf* flash ICs
protection ops)
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev at synopsys.com>
---
Tom, could you please pick this patch to 2019.10?
drivers/mtd/spi/sf_internal.h | 1 +
drivers/mtd/spi/spi-nor-core.c | 181 +++++++++++++++++++++++++++++++++
drivers/mtd/spi/spi-nor-ids.c | 8 +-
include/linux/mtd/spi-nor.h | 4 +
4 files changed, 190 insertions(+), 4 deletions(-)
diff --git a/drivers/mtd/spi/sf_internal.h b/drivers/mtd/spi/sf_internal.h
index a6bf734830a..e6da768bf36 100644
--- a/drivers/mtd/spi/sf_internal.h
+++ b/drivers/mtd/spi/sf_internal.h
@@ -65,6 +65,7 @@ struct flash_info {
#define NO_CHIP_ERASE BIT(12) /* Chip does not support chip erase */
#define SPI_NOR_SKIP_SFDP BIT(13) /* Skip parsing of SFDP tables */
#define USE_CLSR BIT(14) /* use CLSR command */
+#define SPI_NOR_HAS_SST26LOCK BIT(15) /* Flash supports lock/unlock via BPR */
};
extern const struct flash_info spi_nor_ids[];
diff --git a/drivers/mtd/spi/spi-nor-core.c b/drivers/mtd/spi/spi-nor-core.c
index 1acff745d1a..990e39d7c2f 100644
--- a/drivers/mtd/spi/spi-nor-core.c
+++ b/drivers/mtd/spi/spi-nor-core.c
@@ -945,6 +945,177 @@ read_err:
}
#ifdef CONFIG_SPI_FLASH_SST
+/*
+ * sst26 flash series has its own block protection implementation:
+ * 4x - 8 KByte blocks - read & write protection bits - upper addresses
+ * 1x - 32 KByte blocks - write protection bits
+ * rest - 64 KByte blocks - write protection bits
+ * 1x - 32 KByte blocks - write protection bits
+ * 4x - 8 KByte blocks - read & write protection bits - lower addresses
+ *
+ * We'll support only per 64k lock/unlock so lower and upper 64 KByte region
+ * will be treated as single block.
+ */
+#define SST26_BPR_8K_NUM 4
+#define SST26_MAX_BPR_REG_LEN (18 + 1)
+#define SST26_BOUND_REG_SIZE ((32 + SST26_BPR_8K_NUM * 8) * SZ_1K)
+
+enum lock_ctl {
+ SST26_CTL_LOCK,
+ SST26_CTL_UNLOCK,
+ SST26_CTL_CHECK
+};
+
+static bool sst26_process_bpr(u32 bpr_size, u8 *cmd, u32 bit, enum lock_ctl ctl)
+{
+ switch (ctl) {
+ case SST26_CTL_LOCK:
+ cmd[bpr_size - (bit / 8) - 1] |= BIT(bit % 8);
+ break;
+ case SST26_CTL_UNLOCK:
+ cmd[bpr_size - (bit / 8) - 1] &= ~BIT(bit % 8);
+ break;
+ case SST26_CTL_CHECK:
+ return !!(cmd[bpr_size - (bit / 8) - 1] & BIT(bit % 8));
+ }
+
+ return false;
+}
+
+/*
+ * Lock, unlock or check lock status of the flash region of the flash (depending
+ * on the lock_ctl value)
+ */
+static int sst26_lock_ctl(struct spi_nor *nor, loff_t ofs, uint64_t len, enum lock_ctl ctl)
+{
+ struct mtd_info *mtd = &nor->mtd;
+ u32 i, bpr_ptr, rptr_64k, lptr_64k, bpr_size;
+ bool lower_64k = false, upper_64k = false;
+ u8 bpr_buff[SST26_MAX_BPR_REG_LEN] = {};
+ int ret;
+
+ /* Check length and offset for 64k alignment */
+ if ((ofs & (SZ_64K - 1)) || (len & (SZ_64K - 1))) {
+ dev_err(nor->dev, "length or offset is not 64KiB allighned\n");
+ return -EINVAL;
+ }
+
+ if (ofs + len > mtd->size) {
+ dev_err(nor->dev, "range is more than device size: %#llx + %#llx > %#llx\n",
+ ofs, len, mtd->size);
+ return -EINVAL;
+ }
+
+ /* SST26 family has only 16 Mbit, 32 Mbit and 64 Mbit IC */
+ if (mtd->size != SZ_2M &&
+ mtd->size != SZ_4M &&
+ mtd->size != SZ_8M)
+ return -EINVAL;
+
+ bpr_size = 2 + (mtd->size / SZ_64K / 8);
+
+ ret = nor->read_reg(nor, SPINOR_OP_READ_BPR, bpr_buff, bpr_size);
+ if (ret < 0) {
+ dev_err(nor->dev, "fail to read block-protection register\n");
+ return ret;
+ }
+
+ rptr_64k = min_t(u32, ofs + len, mtd->size - SST26_BOUND_REG_SIZE);
+ lptr_64k = max_t(u32, ofs, SST26_BOUND_REG_SIZE);
+
+ upper_64k = ((ofs + len) > (mtd->size - SST26_BOUND_REG_SIZE));
+ lower_64k = (ofs < SST26_BOUND_REG_SIZE);
+
+ /* Lower bits in block-protection register are about 64k region */
+ bpr_ptr = lptr_64k / SZ_64K - 1;
+
+ /* Process 64K blocks region */
+ while (lptr_64k < rptr_64k) {
+ if (sst26_process_bpr(bpr_size, bpr_buff, bpr_ptr, ctl))
+ return EACCES;
+
+ bpr_ptr++;
+ lptr_64k += SZ_64K;
+ }
+
+ /* 32K and 8K region bits in BPR are after 64k region bits */
+ bpr_ptr = (mtd->size - 2 * SST26_BOUND_REG_SIZE) / SZ_64K;
+
+ /* Process lower 32K block region */
+ if (lower_64k)
+ if (sst26_process_bpr(bpr_size, bpr_buff, bpr_ptr, ctl))
+ return EACCES;
+
+ bpr_ptr++;
+
+ /* Process upper 32K block region */
+ if (upper_64k)
+ if (sst26_process_bpr(bpr_size, bpr_buff, bpr_ptr, ctl))
+ return EACCES;
+
+ bpr_ptr++;
+
+ /* Process lower 8K block regions */
+ for (i = 0; i < SST26_BPR_8K_NUM; i++) {
+ if (lower_64k)
+ if (sst26_process_bpr(bpr_size, bpr_buff, bpr_ptr, ctl))
+ return EACCES;
+
+ /* In 8K area BPR has both read and write protection bits */
+ bpr_ptr += 2;
+ }
+
+ /* Process upper 8K block regions */
+ for (i = 0; i < SST26_BPR_8K_NUM; i++) {
+ if (upper_64k)
+ if (sst26_process_bpr(bpr_size, bpr_buff, bpr_ptr, ctl))
+ return EACCES;
+
+ /* In 8K area BPR has both read and write protection bits */
+ bpr_ptr += 2;
+ }
+
+ /* If we check region status we don't need to write BPR back */
+ if (ctl == SST26_CTL_CHECK)
+ return 0;
+
+ ret = nor->write_reg(nor, SPINOR_OP_WRITE_BPR, bpr_buff, bpr_size);
+ if (ret < 0) {
+ dev_err(nor->dev, "fail to write block-protection register\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int sst26_unlock(struct spi_nor *nor, loff_t ofs, uint64_t len)
+{
+ return sst26_lock_ctl(nor, ofs, len, SST26_CTL_UNLOCK);
+}
+
+static int sst26_lock(struct spi_nor *nor, loff_t ofs, uint64_t len)
+{
+ return sst26_lock_ctl(nor, ofs, len, SST26_CTL_LOCK);
+}
+
+/*
+ * Returns EACCES (positive value) if region is locked, 0 if region is unlocked,
+ * and negative on errors.
+ */
+static int sst26_is_locked(struct spi_nor *nor, loff_t ofs, uint64_t len)
+{
+ /*
+ * is_locked function is used for check before reading or erasing flash
+ * region, so offset and length might be not 64k allighned, so adjust
+ * them to be 64k allighned as sst26_lock_ctl works only with 64k
+ * allighned regions.
+ */
+ ofs -= ofs & (SZ_64K - 1);
+ len = len & (SZ_64K - 1) ? (len & ~(SZ_64K - 1)) + SZ_64K : len;
+
+ return sst26_lock_ctl(nor, ofs, len, SST26_CTL_CHECK);
+}
+
static int sst_write_byteprogram(struct spi_nor *nor, loff_t to, size_t len,
size_t *retlen, const u_char *buf)
{
@@ -2302,6 +2473,16 @@ int spi_nor_scan(struct spi_nor *nor)
#endif
#ifdef CONFIG_SPI_FLASH_SST
+ /*
+ * sst26 series block protection implementation differs from other
+ * series.
+ */
+ if (info->flags & SPI_NOR_HAS_SST26LOCK) {
+ nor->flash_lock = sst26_lock;
+ nor->flash_unlock = sst26_unlock;
+ nor->flash_is_locked = sst26_is_locked;
+ }
+
/* sst nor chips use AAI word program */
if (info->flags & SST_WRITE)
mtd->_write = sst_write;
diff --git a/drivers/mtd/spi/spi-nor-ids.c b/drivers/mtd/spi/spi-nor-ids.c
index a3920ba520e..6996c0a2864 100644
--- a/drivers/mtd/spi/spi-nor-ids.c
+++ b/drivers/mtd/spi/spi-nor-ids.c
@@ -214,10 +214,10 @@ const struct flash_info spi_nor_ids[] = {
{ INFO("sst25wf040b", 0x621613, 0, 64 * 1024, 8, SECT_4K) },
{ INFO("sst25wf040", 0xbf2504, 0, 64 * 1024, 8, SECT_4K | SST_WRITE) },
{ INFO("sst25wf080", 0xbf2505, 0, 64 * 1024, 16, SECT_4K | SST_WRITE) },
- { INFO("sst26vf064b", 0xbf2643, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { INFO("sst26wf016", 0xbf2651, 0, 64 * 1024, 32, SECT_4K) },
- { INFO("sst26wf032", 0xbf2622, 0, 64 * 1024, 64, SECT_4K) },
- { INFO("sst26wf064", 0xbf2643, 0, 64 * 1024, 128, SECT_4K) },
+ { INFO("sst26vf064b", 0xbf2643, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_HAS_SST26LOCK | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { INFO("sst26wf016", 0xbf2651, 0, 64 * 1024, 32, SECT_4K | SPI_NOR_HAS_SST26LOCK) },
+ { INFO("sst26wf032", 0xbf2622, 0, 64 * 1024, 64, SECT_4K | SPI_NOR_HAS_SST26LOCK) },
+ { INFO("sst26wf064", 0xbf2643, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_HAS_SST26LOCK) },
#endif
#ifdef CONFIG_SPI_FLASH_STMICRO /* STMICRO */
/* ST Microelectronics -- newer production may have feature updates */
diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
index 88e80af5794..709b49d3936 100644
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -91,6 +91,10 @@
#define SPINOR_OP_WRDI 0x04 /* Write disable */
#define SPINOR_OP_AAI_WP 0xad /* Auto address increment word program */
+/* Used for SST26* flashes only. */
+#define SPINOR_OP_READ_BPR 0x72 /* Read block protection register */
+#define SPINOR_OP_WRITE_BPR 0x42 /* Write block protection register */
+
/* Used for S3AN flashes only */
#define SPINOR_OP_XSE 0x50 /* Sector erase */
#define SPINOR_OP_XPP 0x82 /* Page program */
--
2.21.0
More information about the U-Boot
mailing list