[U-Boot] [PATCH v2 5/5] imx: add i.MX6ULZ board

[Peng Fan]

> Subject: Re: [U-Boot] [PATCH v2 5/5] imx: add i.MX6ULZ board
> 
> Hi Stefan,
> 
> On Thu, Sep 5, 2019 at 5:59 AM Stefan Roese <sr at denx.de> wrote:
> 
> > a)
> > Why is SPL not used in the mainline i.MX6ULL/ULZ port? The i.MX6UL
> > (14x14) does use SPL.
> 
> Yes, I think it could SPL as well. Maybe Peng can comment.

NXP vendor tree not support SPL, so when I upstream the code, SPL was not
included.

Regards,
Peng.

> 
> > b)
> > Do you have a reference board (eval kit) that supports LPDDR2 on the
> > i.MX6ULL/ULZ with the U-Boot source code? I'm asking since we plan to
> > use LPDDR2 instead of DDR3.
> 
> I am only aware of a mx6ul LPDDR2 target, which can probably help:
> 
> https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fsource
> .codeaurora.org%2Fexternal%2Fimx%2Fuboot-imx%2Ftree%2Fboard%2Ffree
> scale%2Fmx6ul_14x14_lpddr2_arm2%2Fimximage.cfg%3Fh%3Dimx_v2019.0
> 4_4.19.35_1.0.0&data=02%7C01%7Cpeng.fan%40nxp.com%7C432044d
> 939ee4717a16808d731f4b329%7C686ea1d3bc2b4c6fa92cd99c5c301635%7
> C0%7C0%7C637032799372346468&sdata=MM2aitptGVWj3M7fdrgryth
> cLoCif6wm9RAWDL7EaHc%3D&reserved=0
> 
> Regards,
> 
> Fabio Estevam