[U-Boot] Regressions in MTD / SPI FLASH
Eugeniy Paltsev
Eugeniy.Paltsev at synopsys.com
Tue Sep 10 11:41:49 UTC 2019
Hi Vignesh,
that patch helps - both erase and write works fine.
For n25q512ax3:
Tested-by: "Eugeniy Paltsev <paltsev at synopsys.com>"
---
Eugeniy Paltsev
________________________________________
From: Vignesh Raghavendra <vigneshr at ti.com>
Sent: Tuesday, September 10, 2019 08:07
To: Eugeniy Paltsev; Jagan Teki
Cc: u-boot at lists.denx.de; uboot-snps-arc at synopsys.com; Alexey Brodkin; trini at konsulko.com
Subject: Re: Regressions in MTD / SPI FLASH
Hi,
On 10/09/19 12:18 AM, Eugeniy Paltsev wrote:
> Hi!
> Comments are inlined:
>
>> On 04/09/19 11:37 PM, Eugeniy Paltsev wrote:
>>> We faced with regressions caused by
>>> commit c4e8862308d4 (mtd: spi: Switch to new SPI NOR framework)
>>> This switch was performed by removing entire u-boot spi-flash
>>> core implementation and copying it from another project.
>>> However the switch is performed without proper testing and
>>> investigations about fixes/improvements were made in u-boot
>>> spi-flash core. This results in regressions.
>>>
>>
>> Apologies for the trouble...
>> As stated in cover letter, this change was necessary as U-Boot SPI flash
>> stack at that time did not features such as 4 byte addressing, SFDP
>> parsing, SPI controllers with MMIO interfaces etc. Also there was need
>> to move to SPI MEM framework to support both SPI NAND and SPI NOR
>> flashes using a single SPI controller drivers.
>> I have to disagree on the part that there was no proper testing... As
>> evident from mailing list archives, patch series was reviewed by
>> multiple reviewers and tested on their platforms as well...
>> Unfortunately its impossible to get all boards owners to test it.
>
> I'm not talking about getting all customers board and testing changes on them.
> It could be done another way - i.e. like it is done for u-boot driver-model migration:
> by introducing the option for choosing which stack will be used and allow customers
> to switch the flash IC they use to new stack until some deadline.
>
I did start off with this. But maintaining two stacks is too cumbersome
and adds to code size (which is a big factor for SPL stage)
>>> One of regression we faced with is related to SST26 flash series which
>>> is used on HSDK board. The cause is that SST26 protection ops
>>> implementation was dropped. The fix of this regression is send
>>> as a patch in this series.
>>>
>>
>> I retained most U-Boot specific code as is (like support for BANK
>> address registers, restriction in transfer sizes) but I somehow
>> overlooked this part. Sorry for that
>>
>>> However there are another regressions. I.E: we also faced with broken
>>> SPI flash on another SNPS boards - AXS101 and AXS103. They use different
>>> flash IC (n25q512ax3) and I didn't investigate the cause yet.
>>>
>>
>> Could you provide more details here:
>> What exactly fails? Is the detected correctly? Does reads work fine? Is
>> Erase or Write broken?
>
> It seems to me that something is wrong with protection ops.
> The erase and write finish without errors however nothing actually happens.
>
I doubt so, because if the blocks were protected, erase/write would have failed
and Read status/Read flag status register should have reported error values.
Anyways, I guess I found a wrt how 4 Byte addressing is handled wrt n25q512* series.
Could you try with below patch helps[1]?
If not please provide logs similar what you have provide now.
If below patch does not help, then please try enabling CONFIG_SPI_FLASH_BAR and see if that helps.
[1]
---8<-----
>From 1de4c447cd4b2590c98f9ceccf8ed32029b42d36 Mon Sep 17 00:00:00 2001
From: Vignesh Raghavendra <vigneshr at ti.com>
Date: Tue, 10 Sep 2019 10:25:17 +0530
Subject: [TST PATCH] mtd: spi: spi-nor-ids: Disable SPI_NOR_4B_OPCODES
Not all variants of n25q256* and n25q512* support 4 Byte stateless
addressing and there is no easy way to discover this at runtime.
Therefore don't set SPI_NOR_4B_OPCODES for these flashes
Signed-off-by: Vignesh Raghavendra <vigneshr at ti.com>
---
drivers/mtd/spi/spi-nor-ids.c | 10 ++++------
1 file changed, 4 insertions(+), 6 deletions(-)
diff --git a/drivers/mtd/spi/spi-nor-ids.c b/drivers/mtd/spi/spi-nor-ids.c
index a3920ba520e0..66ac3256e8f5 100644
--- a/drivers/mtd/spi/spi-nor-ids.c
+++ b/drivers/mtd/spi/spi-nor-ids.c
@@ -161,12 +161,10 @@ const struct flash_info spi_nor_ids[] = {
{ INFO("n25q064a", 0x20bb17, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_QUAD_READ) },
{ INFO("n25q128a11", 0x20bb18, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_QUAD_READ) },
{ INFO("n25q128a13", 0x20ba18, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_QUAD_READ) },
- { INFO("n25q256a", 0x20ba19, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
- { INFO("n25q256ax1", 0x20bb19, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
- { INFO6("mt25qu512a", 0x20bb20, 0x104400, 64 * 1024, 1024,
- SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
- { INFO("n25q512a", 0x20bb20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
- { INFO("n25q512ax3", 0x20ba20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
+ { INFO("n25q256a", 0x20ba19, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { INFO("n25q256ax1", 0x20bb19, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_QUAD_READ) },
+ { INFO("n25q512a", 0x20bb20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
+ { INFO("n25q512ax3", 0x20ba20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
{ INFO("n25q00", 0x20ba21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) },
{ INFO("n25q00a", 0x20bb21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) },
{ INFO("mt25qu02g", 0x20bb22, 0, 64 * 1024, 4096, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) },
--
2.23.0
More information about the U-Boot
mailing list