[U-Boot] [PATCH] arm64: zynqmp: Enable gpio hog support for zcu102

[Michal Simek]

Gpio hogs are used for GT mux setup after power up.

Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---

 configs/xilinx_zynqmp_zcu102_rev1_0_defconfig | 1 +
 configs/xilinx_zynqmp_zcu102_revA_defconfig   | 1 +
 configs/xilinx_zynqmp_zcu102_revB_defconfig   | 1 +
 3 files changed, 3 insertions(+)

diff --git a/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig b/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig
index 371e6363db2f..52ee2f2a0b04 100644
--- a/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig
+++ b/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig
@@ -58,6 +58,7 @@ CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
 CONFIG_FPGA_XILINX=y
 CONFIG_FPGA_ZYNQMPPL=y
 CONFIG_DM_GPIO=y
+CONFIG_GPIO_HOG=y
 CONFIG_XILINX_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_CADENCE=y
diff --git a/configs/xilinx_zynqmp_zcu102_revA_defconfig b/configs/xilinx_zynqmp_zcu102_revA_defconfig
index a0fb6c3586cc..2b7cab8add62 100644
--- a/configs/xilinx_zynqmp_zcu102_revA_defconfig
+++ b/configs/xilinx_zynqmp_zcu102_revA_defconfig
@@ -58,6 +58,7 @@ CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
 CONFIG_FPGA_XILINX=y
 CONFIG_FPGA_ZYNQMPPL=y
 CONFIG_DM_GPIO=y
+CONFIG_GPIO_HOG=y
 CONFIG_XILINX_GPIO=y
 CONFIG_DM_PCA953X=y
 CONFIG_DM_I2C=y
diff --git a/configs/xilinx_zynqmp_zcu102_revB_defconfig b/configs/xilinx_zynqmp_zcu102_revB_defconfig
index db7c093d5ebc..ce271b5a31ca 100644
--- a/configs/xilinx_zynqmp_zcu102_revB_defconfig
+++ b/configs/xilinx_zynqmp_zcu102_revB_defconfig
@@ -58,6 +58,7 @@ CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
 CONFIG_FPGA_XILINX=y
 CONFIG_FPGA_ZYNQMPPL=y
 CONFIG_DM_GPIO=y
+CONFIG_GPIO_HOG=y
 CONFIG_XILINX_GPIO=y
 CONFIG_DM_PCA953X=y
 CONFIG_DM_I2C=y
-- 
2.17.1