[U-Boot] [PATCH] configs: rockpro64-rk3399: Enable CONFIG_MISC_INIT_R and ROCKCHIP_EFUSE【请注意，邮件由u-boot-bounces at lists.denx.de代发】 CONFIG_MISC_INIT_R and ROCKCHIP_EFUSE

[Kever Yang]

On 2019/9/10 上午4:48, Hugh Cole-Baker wrote:
> This enables reading the cpuid from e-fuse, and deriving a static
> MAC address from it. Without this, the ethernet interface on the
> rockpro64 can't be used to boot.
>
> Signed-off-by: Hugh Cole-Baker <sigmaris at gmail.com>
> Cc: Philipp Tomsich <philipp.tomsich at theobroma-systems.com>


Reviewed-by: Kever Yang <kever.yang at rock-chips.com>


Thanks,

- Kever

> ---
>   configs/rockpro64-rk3399_defconfig | 3 +++
>   1 file changed, 3 insertions(+)
>
> diff --git a/configs/rockpro64-rk3399_defconfig b/configs/rockpro64-rk3399_defconfig
> index 40ebad5abb..22b8bc503b 100644
> --- a/configs/rockpro64-rk3399_defconfig
> +++ b/configs/rockpro64-rk3399_defconfig
> @@ -9,6 +9,7 @@ CONFIG_DEBUG_UART_BASE=0xFF1A0000
>   CONFIG_DEBUG_UART_CLOCK=24000000
>   CONFIG_DEBUG_UART=y
>   CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-rockpro64.dtb"
> +CONFIG_MISC_INIT_R=y
>   # CONFIG_DISPLAY_CPUINFO is not set
>   CONFIG_DISPLAY_BOARDINFO_LATE=y
>   # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
> @@ -28,6 +29,8 @@ CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent
>   CONFIG_ENV_IS_IN_MMC=y
>   CONFIG_ROCKCHIP_GPIO=y
>   CONFIG_SYS_I2C_ROCKCHIP=y
> +CONFIG_MISC=y
> +CONFIG_ROCKCHIP_EFUSE=y
>   CONFIG_MMC_DW=y
>   CONFIG_MMC_DW_ROCKCHIP=y
>   CONFIG_MMC_SDHCI=y