[U-Boot] [PATCH v1 4/5] apalis/colibri_t30: add note about colibri vs. nvidia uart mapping

[Marcel Ziswiler]

From: Marcel Ziswiler <marcel.ziswiler at toradex.com>

The following mapping is applicable for Apalis T30:

Apalis UART1: NVIDIA UARTA
Apalis UART2: NVIDIA UARTD
Apalis UART3: NVIDIA UARTB
Apalis UART4: NVIDIA UARTC

The following mapping is applicable for Colibri T30:

Colibri UART-A: NVIDIA UARTA
Colibri UART-B: NVIDIA UARTD
Colibri UART-C: NVIDIA UARTB

Signed-off-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>

---

 include/configs/apalis_t30.h  | 9 ++++++++-
 include/configs/colibri_t30.h | 8 +++++++-
 2 files changed, 15 insertions(+), 2 deletions(-)

diff --git a/include/configs/apalis_t30.h b/include/configs/apalis_t30.h
index f6adfeb96a..b6711c57b8 100644
--- a/include/configs/apalis_t30.h
+++ b/include/configs/apalis_t30.h
@@ -12,7 +12,14 @@
 
 #include "tegra30-common.h"
 
-/* Board-specific serial config */
+/*
+ * Board-specific serial config
+ *
+ * Apalis UART1: NVIDIA UARTA
+ * Apalis UART2: NVIDIA UARTD
+ * Apalis UART3: NVIDIA UARTB
+ * Apalis UART4: NVIDIA UARTC
+ */
 #define CONFIG_TEGRA_ENABLE_UARTA
 #define CONFIG_SYS_NS16550_COM1		NV_PA_APB_UARTA_BASE
 
diff --git a/include/configs/colibri_t30.h b/include/configs/colibri_t30.h
index 8ff6433f45..6053776019 100644
--- a/include/configs/colibri_t30.h
+++ b/include/configs/colibri_t30.h
@@ -14,7 +14,13 @@
 
 /* High-level configuration options */
 
-/* Board-specific serial config */
+/*
+ * Board-specific serial config
+ *
+ * Colibri UART-A: NVIDIA UARTA
+ * Colibri UART-B: NVIDIA UARTD
+ * Colibri UART-C: NVIDIA UARTB
+ */
 #define CONFIG_TEGRA_ENABLE_UARTA
 #define CONFIG_SYS_NS16550_COM1		NV_PA_APB_UARTA_BASE
 
-- 
2.21.0