[U-Boot] [PATCH 04/17] imx8mn: set BYPASS ID SWAP to avoid AXI bus errors

[Peng Fan]

Set the BYPASS ID SWAP bit (GPR10 bit 1) in order for GPU not to
generated AXI bus errors with TZC380 enabled.

Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
 arch/arm/mach-imx/imx8m/soc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-imx/imx8m/soc.c b/arch/arm/mach-imx/imx8m/soc.c
index 1909df03ec..638f2946e6 100644
--- a/arch/arm/mach-imx/imx8m/soc.c
+++ b/arch/arm/mach-imx/imx8m/soc.c
@@ -56,7 +56,7 @@ void enable_tzc380(void)
 	/* Enable TZASC and lock setting */
 	setbits_le32(&gpr->gpr[10], GPR_TZASC_EN);
 	setbits_le32(&gpr->gpr[10], GPR_TZASC_EN_LOCK);
-	if (IS_ENABLED(CONFIG_IMX8MM))
+	if (is_imx8mm() || is_imx8mn())
 		setbits_le32(&gpr->gpr[10], BIT(1));
 	/*
 	 * set Region 0 attribute to allow secure and non-secure
-- 
2.16.4