[U-Boot] [PATCH 5/5] cmd: ti: ddr3: Move the print statement after test

[Lokesh Vutla]

From: Krunal Bhargav <k-bhargav at ti.com>

If the ECC is enabled over the entire memory region, we need to ensure
the printf/put calls do not modify the stack after ECC is disabled.
Moved the printf/put statements after ECC is enabled.

Signed-off-by: Krunal Bhargav <k-bhargav at ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla at ti.com>
---
 cmd/ti/ddr3.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/cmd/ti/ddr3.c b/cmd/ti/ddr3.c
index 34f870ab43..448a7f54a9 100644
--- a/cmd/ti/ddr3.c
+++ b/cmd/ti/ddr3.c
@@ -202,10 +202,6 @@ static int ddr_memory_ecc_err(u32 addr, u32 ecc_err)
 	writel(val2, addr);
 
 	val3 = readl(addr);
-	printf("\tECC test: addr 0x%x, read data 0x%x, written data 0x%x, err pattern: 0x%x, read after write data 0x%x\n",
-	       addr, val1, val2, ecc_err, val3);
-
-	puts("\tECC test: Enabling DDR ECC ...\n");
 #ifdef CONFIG_ARCH_KEYSTONE
 	ecc_ctrl = ECC_START_ADDR1 | (ECC_END_ADDR1 << 16);
 	writel(ecc_ctrl, EMIF1_BASE + KS2_DDR3_ECC_ADDR_RANGE1_OFFSET);
@@ -214,6 +210,11 @@ static int ddr_memory_ecc_err(u32 addr, u32 ecc_err)
 	writel(ecc_ctrl, &emif->emif_ecc_ctrl_reg);
 #endif
 
+	printf("\tECC test: addr 0x%x, read data 0x%x, written data 0x%x, err pattern: 0x%x, read after write data 0x%x\n",
+	       addr, val1, val2, ecc_err, val3);
+
+	puts("\tECC test: Enabled DDR ECC ...\n");
+
 	val1 = readl(addr);
 	printf("\tECC test: addr 0x%x, read data 0x%x\n", addr, val1);
 
-- 
2.22.0