[U-Boot] [PATCH 3/3] config: enable DFU over USB on Raspberry Pi4 boards

[Marek Szyprowski]

Enable support for DFU over USB. This requires to enable USB gadget,
DWC2 UDC OTG driver and DFU command. DFU entities are defined for the
following firmware objects: u-boot.bin, uboot.env and zImage.

Signed-off-by: Marek Szyprowski <m.szyprowski at samsung.com>
---
 configs/rpi_4_32b_defconfig | 11 +++++++++++
 include/configs/rpi.h       | 10 ++++++++++
 2 files changed, 21 insertions(+)

diff --git a/configs/rpi_4_32b_defconfig b/configs/rpi_4_32b_defconfig
index a31a617a5fb..0a375b97369 100644
--- a/configs/rpi_4_32b_defconfig
+++ b/configs/rpi_4_32b_defconfig
@@ -12,6 +12,7 @@ CONFIG_MISC_INIT_R=y
 # CONFIG_DISPLAY_CPUINFO is not set
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_SYS_PROMPT="U-Boot> "
+CONFIG_CMD_DFU=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_MMC=y
@@ -19,6 +20,7 @@ CONFIG_CMD_FS_UUID=y
 CONFIG_ENV_FAT_INTERFACE="mmc"
 CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+CONFIG_DFU_MMC=y
 CONFIG_DM_KEYBOARD=y
 CONFIG_DM_MMC=y
 CONFIG_MMC_SDHCI=y
@@ -26,6 +28,15 @@ CONFIG_MMC_SDHCI_BCM2835=y
 CONFIG_PINCTRL=y
 # CONFIG_PINCTRL_GENERIC is not set
 # CONFIG_REQUIRE_SERIAL_CONSOLE is not set
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_DM_USB_GADGET=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="FSL"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0525
+CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
+CONFIG_USB_GADGET_DWC2_OTG=y
+CONFIG_USB_GADGET_DOWNLOAD=y
 CONFIG_DM_VIDEO=y
 CONFIG_SYS_WHITE_ON_BLACK=y
 CONFIG_CONSOLE_SCROLL_LINES=10
diff --git a/include/configs/rpi.h b/include/configs/rpi.h
index 77d2d5458a1..f502915ad53 100644
--- a/include/configs/rpi.h
+++ b/include/configs/rpi.h
@@ -70,9 +70,18 @@
 #define CONFIG_TFTP_TSIZE
 #endif
 
+/* DFU over USB/UDC */
+#ifdef CONFIG_CMD_DFU
+#define CONFIG_SYS_DFU_DATA_BUF_SIZE	SZ_1M
+#define CONFIG_SYS_DFU_MAX_FILE_SIZE	SZ_2M
+#define ENV_DFU_SETTINGS \
+	"dfu_alt_info=u-boot.bin fat 0 1;uboot.env fat 0 1;zImage fat 0 1"
+#endif
+
 /* Console configuration */
 #define CONFIG_SYS_CBSIZE		1024
 
+
 /* Environment */
 #define CONFIG_ENV_SIZE			SZ_16K
 #define CONFIG_SYS_LOAD_ADDR		0x1000000
@@ -185,6 +194,7 @@
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"dhcpuboot=usb start; dhcp u-boot.uimg; bootm\0" \
 	ENV_DEVICE_SETTINGS \
+	ENV_DFU_SETTINGS \
 	ENV_MEM_LAYOUT_SETTINGS \
 	BOOTENV
 
-- 
2.17.1