[U-Boot] imx6dl_mamoj broken

[Stefano Babic]

Hi Anatolji,

On 16/09/19 22:20, Anatolij Gustschin wrote:
> Hi Jagan,
> 
> On Mon, 16 Sep 2019 13:36:03 +0530
> Jagan Teki jagan at amarulasolutions.com wrote:
> ...
>>>       arm:  +   imx6dl_mamoj
>>> +spl/u-boot-spl.bin exceeds file size limit:
>>> +  limit:  53248 bytes
>>> +  actual: 58597 bytes
>>> +  excess: 5349 bytes
>>>
>>> +make[1]: *** [spl/u-boot-spl.bin] Error 1
>>> +make[1]: *** Deleting file `spl/u-boot-spl.bin'
>>> +make: *** [sub-make] Error 2  
>>
>> Any idea which commit make this blow-out. we didn't do anything with
>> this board recently. I guess some default CLK framework or so?
> 
> This check fails since the recent changes in SPL size limit check,
> see commit 25d38f9b34be (imx6: spl: Reduce SPL limit size in case
> CONFIG_SECURE_BOOT is enabled).
> 
> i.MX6DL has 128KiB OCRAM, probably we could increase default
> SPL_SIZE_LIMIT config in common/spl/Kconfig for i.MX6DL?

Well, the current size was computed for the Solo /DL - Dual / Quad has
twice OCRAM. According to chapter "8.4 Internal ROM / RAM map", for Solo
/Dl there is 68KB available for user (address 0x907000--0x917FFF). I do
not remember the details, but then we have to reserve space for gd,
stack, etc. This leads to the actual value.

Regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================