[U-Boot] [PATCH 3/3] ubi: Add "skipcheck" command to set/clear this bit in the UBI volume hdr

[Heiko Schocher]

Hello Stefan,

Am 12.09.2019 um 16:41 schrieb Stefan Roese:
> U-Boot now supports the "skip_check" flag to optionally skip the CRC
> check at open time. Currently its only possible to set this bit upon
> UBI volume creation. But it might be very useful to also set this bit
> on already installed systems (e.g. field upgrade) to make also use of
> the boot-time decrease on those systems.
> 
> This patch now adds a new "ubi" command "ubi skipcheck" to set or clear
> this bit in the UBI volume header:
> 
> => ubi skipcheck rootfs0 on
> Setting skip_check on volume rootfs0
> 
> BTW: This saves approx. 10 seconds Linux bootup time on a MT7688 based
> target with 128MiB of SPI NAND.
> 
> Signed-off-by: Stefan Roese <sr at denx.de>
> Cc: Quentin Schulz <quentin.schulz at bootlin.com>
> Cc: Boris Brezillon <boris.brezillon at bootlin.com>
> Cc: Heiko Schocher <hs at denx.de>
> ---
>   cmd/ubi.c | 34 ++++++++++++++++++++++++++++++++++
>   1 file changed, 34 insertions(+)

Reviewed-by: Heiko Schocher <hs at denx.de>

Could you please send a v2 with the suggestion from Andreas to add
some infos into doc/README.ubi?

Thanks!

bye,
Heiko
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-52   Fax: +49-8142-66989-80   Email: hs at denx.de