[U-Boot] [PATCH v2 15/28] phy: mt76x8-usb-phy: add slew rate calibration and remove non-mt7628 part
Weijie Gao
weijie.gao at mediatek.com
Wed Sep 18 02:15:49 UTC 2019
This patch adds slew rate calibration for mt76x8-usb-phy, removes code
which belongs to mt7620, and gets rid of using syscon and regmap by using
clock driver and reset controller.
Signed-off-by: Weijie Gao <weijie.gao at mediatek.com>
---
drivers/phy/Kconfig | 2 +
drivers/phy/mt76x8-usb-phy.c | 225 ++++++++++++++++++++++++-----------
2 files changed, 159 insertions(+), 68 deletions(-)
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 02312273e2..5c7b221431 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -200,6 +200,8 @@ config KEYSTONE_USB_PHY
config MT76X8_USB_PHY
bool "MediaTek MT76x8 (7628/88) USB PHY support"
depends on PHY
+ select CLK
+ select DM_RESET
help
Support the USB PHY in MT76x8 SoCs
diff --git a/drivers/phy/mt76x8-usb-phy.c b/drivers/phy/mt76x8-usb-phy.c
index 268da8ef6c..1e7c5f334b 100644
--- a/drivers/phy/mt76x8-usb-phy.c
+++ b/drivers/phy/mt76x8-usb-phy.c
@@ -6,93 +6,185 @@
* Copyright (C) 2017 John Crispin <john at phrozen.org>
*/
+#include <clk.h>
#include <common.h>
#include <dm.h>
#include <generic-phy.h>
-#include <regmap.h>
-#include <reset-uclass.h>
-#include <syscon.h>
+#include <reset.h>
#include <asm/io.h>
-
-#define RT_SYSC_REG_SYSCFG1 0x014
-#define RT_SYSC_REG_CLKCFG1 0x030
-#define RT_SYSC_REG_USB_PHY_CFG 0x05c
+#include <linux/bitops.h>
#define OFS_U2_PHY_AC0 0x800
+#define USBPLL_FBDIV_S 16
+#define USBPLL_FBDIV_M GENMASK(22, 16)
+#define BG_TRIM_S 8
+#define BG_TRIM_M GENMASK(11, 8)
+#define BG_RBSEL_S 6
+#define BG_RBSEL_M GENMASK(7, 6)
+#define BG_RASEL_S 4
+#define BG_RASEL_M GENMASK(5, 4)
+#define BGR_DIV_S 2
+#define BGR_DIV_M GENMASK(3, 2)
+#define CHP_EN BIT(1)
+
#define OFS_U2_PHY_AC1 0x804
+#define VRT_VREF_SEL_S 28
+#define VRT_VREF_SEL_M GENMASK(30, 28)
+#define TERM_VREF_SEL_S 24
+#define TERM_VREF_SEL_M GENMASK(26, 24)
+#define USBPLL_RSVD BIT(4)
+#define USBPLL_ACCEN BIT(3)
+#define USBPLL_LF BIT(2)
+
#define OFS_U2_PHY_AC2 0x808
+
#define OFS_U2_PHY_ACR0 0x810
-#define OFS_U2_PHY_ACR1 0x814
-#define OFS_U2_PHY_ACR2 0x818
+#define HSTX_SRCAL_EN BIT(23)
+#define HSTX_SRCTRL_S 16
+#define HSTX_SRCTRL_M GENMASK(18, 16)
+
#define OFS_U2_PHY_ACR3 0x81C
-#define OFS_U2_PHY_ACR4 0x820
-#define OFS_U2_PHY_AMON0 0x824
+#define HSTX_DBIST_S 28
+#define HSTX_DBIST_M GENMASK(31, 28)
+#define HSRX_BIAS_EN_SEL_S 20
+#define HSRX_BIAS_EN_SEL_M GENMASK(21, 20)
+
#define OFS_U2_PHY_DCR0 0x860
-#define OFS_U2_PHY_DCR1 0x864
+#define PHYD_RESERVE_S 8
+#define PHYD_RESERVE_M GENMASK(23, 8)
+#define CDR_FILT_S 0
+#define CDR_FILT_M GENMASK(3, 0)
+
#define OFS_U2_PHY_DTM0 0x868
-#define OFS_U2_PHY_DTM1 0x86C
+#define FORCE_USB_CLKEN BIT(25)
+
+#define OFS_FM_CR0 0xf00
+#define FREQDET_EN BIT(24)
+#define CYCLECNT_S 0
+#define CYCLECNT_M GENMASK(23, 0)
-#define RT_RSTCTRL_UDEV BIT(25)
-#define RT_RSTCTRL_UHST BIT(22)
-#define RT_SYSCFG1_USB0_HOST_MODE BIT(10)
+#define OFS_FM_MONR0 0xf0c
-#define MT7620_CLKCFG1_UPHY0_CLK_EN BIT(25)
-#define MT7620_CLKCFG1_UPHY1_CLK_EN BIT(22)
-#define RT_CLKCFG1_UPHY1_CLK_EN BIT(20)
-#define RT_CLKCFG1_UPHY0_CLK_EN BIT(18)
+#define OFS_FM_MONR1 0xf10
+#define FRCK_EN BIT(8)
-#define USB_PHY_UTMI_8B60M BIT(1)
-#define UDEV_WAKEUP BIT(0)
+#define U2_SR_COEF_7628 32
struct mt76x8_usb_phy {
- u32 clk;
void __iomem *base;
- struct regmap *sysctl;
+ struct clk cg; /* for clock gating */
+ struct reset_ctl rst_phy;
};
-static void u2_phy_w32(struct mt76x8_usb_phy *phy, u32 val, u32 reg)
+static void phy_w32(struct mt76x8_usb_phy *phy, u32 reg, u32 val)
{
writel(val, phy->base + reg);
}
-static u32 u2_phy_r32(struct mt76x8_usb_phy *phy, u32 reg)
+static u32 phy_r32(struct mt76x8_usb_phy *phy, u32 reg)
{
return readl(phy->base + reg);
}
+static void phy_rmw32(struct mt76x8_usb_phy *phy, u32 reg, u32 clr, u32 set)
+{
+ clrsetbits_32(phy->base + reg, clr, set);
+}
+
static void mt76x8_usb_phy_init(struct mt76x8_usb_phy *phy)
{
- u2_phy_r32(phy, OFS_U2_PHY_AC2);
- u2_phy_r32(phy, OFS_U2_PHY_ACR0);
- u2_phy_r32(phy, OFS_U2_PHY_DCR0);
-
- u2_phy_w32(phy, 0x00ffff02, OFS_U2_PHY_DCR0);
- u2_phy_r32(phy, OFS_U2_PHY_DCR0);
- u2_phy_w32(phy, 0x00555502, OFS_U2_PHY_DCR0);
- u2_phy_r32(phy, OFS_U2_PHY_DCR0);
- u2_phy_w32(phy, 0x00aaaa02, OFS_U2_PHY_DCR0);
- u2_phy_r32(phy, OFS_U2_PHY_DCR0);
- u2_phy_w32(phy, 0x00000402, OFS_U2_PHY_DCR0);
- u2_phy_r32(phy, OFS_U2_PHY_DCR0);
- u2_phy_w32(phy, 0x0048086a, OFS_U2_PHY_AC0);
- u2_phy_w32(phy, 0x4400001c, OFS_U2_PHY_AC1);
- u2_phy_w32(phy, 0xc0200000, OFS_U2_PHY_ACR3);
- u2_phy_w32(phy, 0x02000000, OFS_U2_PHY_DTM0);
+ phy_r32(phy, OFS_U2_PHY_AC2);
+ phy_r32(phy, OFS_U2_PHY_ACR0);
+ phy_r32(phy, OFS_U2_PHY_DCR0);
+
+ phy_w32(phy, OFS_U2_PHY_DCR0,
+ (0xffff << PHYD_RESERVE_S) | (2 << CDR_FILT_S));
+ phy_r32(phy, OFS_U2_PHY_DCR0);
+
+ phy_w32(phy, OFS_U2_PHY_DCR0,
+ (0x5555 << PHYD_RESERVE_S) | (2 << CDR_FILT_S));
+ phy_r32(phy, OFS_U2_PHY_DCR0);
+
+ phy_w32(phy, OFS_U2_PHY_DCR0,
+ (0xaaaa << PHYD_RESERVE_S) | (2 << CDR_FILT_S));
+ phy_r32(phy, OFS_U2_PHY_DCR0);
+
+ phy_w32(phy, OFS_U2_PHY_DCR0,
+ (4 << PHYD_RESERVE_S) | (2 << CDR_FILT_S));
+ phy_r32(phy, OFS_U2_PHY_DCR0);
+
+ phy_w32(phy, OFS_U2_PHY_AC0,
+ (0x48 << USBPLL_FBDIV_S) | (8 << BG_TRIM_S) |
+ (1 << BG_RBSEL_S) | (2 << BG_RASEL_S) | (2 << BGR_DIV_S) |
+ CHP_EN);
+
+ phy_w32(phy, OFS_U2_PHY_AC1,
+ (4 << VRT_VREF_SEL_S) | (4 << TERM_VREF_SEL_S) | USBPLL_RSVD |
+ USBPLL_ACCEN | USBPLL_LF);
+
+ phy_w32(phy, OFS_U2_PHY_ACR3,
+ (12 << HSTX_DBIST_S) | (2 << HSRX_BIAS_EN_SEL_S));
+
+ phy_w32(phy, OFS_U2_PHY_DTM0, FORCE_USB_CLKEN);
+}
+
+static void mt76x8_usb_phy_sr_calibrate(struct mt76x8_usb_phy *phy)
+{
+ u32 fmout, tmp = 4;
+ int i;
+
+ /* Enable HS TX SR calibration */
+ phy_rmw32(phy, OFS_U2_PHY_ACR0, 0, HSTX_SRCAL_EN);
+ mdelay(1);
+
+ /* Enable free run clock */
+ phy_rmw32(phy, OFS_FM_MONR1, 0, FRCK_EN);
+
+ /* Set cycle count = 0x400 */
+ phy_rmw32(phy, OFS_FM_CR0, CYCLECNT_M, 0x400 << CYCLECNT_S);
+
+ /* Enable frequency meter */
+ phy_rmw32(phy, OFS_FM_CR0, 0, FREQDET_EN);
+
+ /* Wait for FM detection done, set timeout to 10ms */
+ for (i = 0; i < 10; i++) {
+ fmout = phy_r32(phy, OFS_FM_MONR0);
+
+ if (fmout)
+ break;
+
+ mdelay(1);
+ }
+
+ /* Disable frequency meter */
+ phy_rmw32(phy, OFS_FM_CR0, FREQDET_EN, 0);
+
+ /* Disable free run clock */
+ phy_rmw32(phy, OFS_FM_MONR1, FRCK_EN, 0);
+
+ /* Disable HS TX SR calibration */
+ phy_rmw32(phy, OFS_U2_PHY_ACR0, HSTX_SRCAL_EN, 0);
+ mdelay(1);
+
+ if (fmout) {
+ /*
+ * set reg = (1024 / FM_OUT) * 25 * 0.028
+ * (round to the nearest digits)
+ */
+ tmp = (((1024 * 25 * U2_SR_COEF_7628) / fmout) + 500) / 1000;
+ }
+
+ phy_rmw32(phy, OFS_U2_PHY_ACR0, HSTX_SRCTRL_M,
+ (tmp << HSTX_SRCTRL_S) & HSTX_SRCTRL_M);
}
static int mt76x8_usb_phy_power_on(struct phy *_phy)
{
struct mt76x8_usb_phy *phy = dev_get_priv(_phy->dev);
- u32 t;
- /* enable the phy */
- regmap_update_bits(phy->sysctl, RT_SYSC_REG_CLKCFG1,
- phy->clk, phy->clk);
+ clk_enable(&phy->cg);
- /* setup host mode */
- regmap_update_bits(phy->sysctl, RT_SYSC_REG_SYSCFG1,
- RT_SYSCFG1_USB0_HOST_MODE,
- RT_SYSCFG1_USB0_HOST_MODE);
+ reset_deassert(&phy->rst_phy);
/*
* The SDK kernel had a delay of 100ms. however on device
@@ -100,17 +192,8 @@ static int mt76x8_usb_phy_power_on(struct phy *_phy)
*/
mdelay(10);
- if (phy->base)
- mt76x8_usb_phy_init(phy);
-
- /* print some status info */
- regmap_read(phy->sysctl, RT_SYSC_REG_USB_PHY_CFG, &t);
- printf("remote usb device wakeup %s\n",
- (t & UDEV_WAKEUP) ? "enabled" : "disabled");
- if (t & USB_PHY_UTMI_8B60M)
- printf("UTMI 8bit 60MHz\n");
- else
- printf("UTMI 16bit 30MHz\n");
+ mt76x8_usb_phy_init(phy);
+ mt76x8_usb_phy_sr_calibrate(phy);
return 0;
}
@@ -119,9 +202,9 @@ static int mt76x8_usb_phy_power_off(struct phy *_phy)
{
struct mt76x8_usb_phy *phy = dev_get_priv(_phy->dev);
- /* disable the phy */
- regmap_update_bits(phy->sysctl, RT_SYSC_REG_CLKCFG1,
- phy->clk, 0);
+ clk_disable(&phy->cg);
+
+ reset_assert(&phy->rst_phy);
return 0;
}
@@ -129,15 +212,21 @@ static int mt76x8_usb_phy_power_off(struct phy *_phy)
static int mt76x8_usb_phy_probe(struct udevice *dev)
{
struct mt76x8_usb_phy *phy = dev_get_priv(dev);
-
- phy->sysctl = syscon_regmap_lookup_by_phandle(dev, "ralink,sysctl");
- if (IS_ERR(phy->sysctl))
- return PTR_ERR(phy->sysctl);
+ int ret;
phy->base = dev_read_addr_ptr(dev);
if (!phy->base)
return -EINVAL;
+ /* clock gate */
+ ret = clk_get_by_name(dev, "cg", &phy->cg);
+ if (ret)
+ return ret;
+
+ ret = reset_get_by_name(dev, "phy", &phy->rst_phy);
+ if (ret)
+ return ret;
+
return 0;
}
--
2.17.1
More information about the U-Boot
mailing list