[U-Boot] [PATCH 6/7] configs: tinker: Enable SDRAM, SPL stack

[Kever Yang]

On 2019/9/17 下午2:10, Jagan Teki wrote:
> SPL sets up SDRAM while in its board_init_f()
> function, it is possible for the stack to move
> there before board_init_r() is reached.
>
> So it is required to reserve the stack for SDRAM,
> with a proper location and size otherwise any
> operations during SPL handoff would leads to failure.
>
> On, this particular context tinker-rk3288 SPL is
> failing to launch U-Boot proper on SDRAM due to
> lack of stack.
>
>   U-Boot SPL 2019.10-rc3-00297-g5ba8b12543 (Sep 12 2019 - 08:50:36 +0530)
>   Trying to boot from MMC1
>   spl: mmc init failed with error: -110
>   SPL: failed to boot from all boot devices
>   ### ERROR ### Please RESET the board ###
>
> So, enable SPL_STACK_R_ADDR and it's related-config
> items for SDRAM, SPL stack to setup properly.
>
> Reported-by: Jagan Teki <jagan at amarulasolutions.com>
> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>

Reviewed-by: Kever Yang<kever.yang at rock-chips.com>

Thanks,
- Kever
> ---
>   configs/tinker-rk3288_defconfig | 3 +++
>   1 file changed, 3 insertions(+)
>
> diff --git a/configs/tinker-rk3288_defconfig b/configs/tinker-rk3288_defconfig
> index adab1cba42..359be078ac 100644
> --- a/configs/tinker-rk3288_defconfig
> +++ b/configs/tinker-rk3288_defconfig
> @@ -4,6 +4,7 @@ CONFIG_SYS_TEXT_BASE=0x01000000
>   CONFIG_ROCKCHIP_RK3288=y
>   CONFIG_TARGET_TINKER_RK3288=y
>   CONFIG_NR_DRAM_BANKS=1
> +CONFIG_SPL_STACK_R_ADDR=0x80000
>   CONFIG_SPL_SIZE_LIMIT=307200
>   CONFIG_DEBUG_UART_BASE=0xff690000
>   CONFIG_DEBUG_UART_CLOCK=24000000
> @@ -15,6 +16,8 @@ CONFIG_CONSOLE_MUX=y
>   CONFIG_DEFAULT_FDT_FILE="rk3288-tinker.dtb"
>   # CONFIG_DISPLAY_CPUINFO is not set
>   CONFIG_DISPLAY_BOARDINFO_LATE=y
> +CONFIG_SPL_STACK_R=y
> +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
>   CONFIG_CMD_GPIO=y
>   CONFIG_CMD_GPT=y
>   CONFIG_CMD_I2C=y