[U-Boot] [PATCH 05/12] configs: Add sam9x60ek_mmc_defconfig

[Tudor.Ambarus at microchip.com]

From: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun at microchip.com>

add sam9x60ek_mmc_defconfig and for now only supports booting from
sdcard.

Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun at microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre at microchip.com>
[nicolas.ferre at microchip.com: split patch, add Ethernet controller,
phy and tools]
[claudiu.beznea at microchip.com: add CONFIG_OF_LIBFDT_OVERLAY]
Signed-off-by: Claudiu Beznea <claudiu.beznea at microchip.com>
[tudor.ambarus at microchip.com: Fix number of DRAM banks:
One DDR2-SDRAM (W972GG6KB 2 Gbit = 16 Mbit x 16 x 8 banks]
Signed-off-by: Tudor Ambarus <tudor.ambarus at microchip.com>
---
 configs/sam9x60ek_mmc_defconfig | 52 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 52 insertions(+)
 create mode 100644 configs/sam9x60ek_mmc_defconfig

diff --git a/configs/sam9x60ek_mmc_defconfig b/configs/sam9x60ek_mmc_defconfig
new file mode 100644
index 000000000000..6cdc819a6793
--- /dev/null
+++ b/configs/sam9x60ek_mmc_defconfig
@@ -0,0 +1,52 @@
+CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
+CONFIG_SYS_TEXT_BASE=0x23f00000
+CONFIG_TARGET_SAM9X60EK=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_ENV_SIZE=0x4000
+CONFIG_NR_DRAM_BANKS=8
+CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_DEBUG_UART_BASE=0xfffff200
+CONFIG_DEBUG_UART_CLOCK=200000000
+CONFIG_DEBUG_UART=y
+CONFIG_FIT=y
+CONFIG_SD_BOOT=y
+CONFIG_BOOTDELAY=3
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="mem=256M console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait"
+CONFIG_SYS_CONSOLE_IS_IN_ENV=y
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="U-Boot> "
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_MMC=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_FAT=y
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="sam9x60ek"
+CONFIG_ENV_IS_IN_FAT=y
+CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
+CONFIG_DM=y
+CONFIG_CLK=y
+CONFIG_CLK_AT91=y
+CONFIG_AT91_GENERIC_CLK=y
+CONFIG_DM_GPIO=y
+CONFIG_AT91_GPIO=y
+CONFIG_DM_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ATMEL=y
+CONFIG_PHY_MICREL=y
+CONFIG_DM_ETH=y
+CONFIG_MACB=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_AT91=y
+CONFIG_DM_SERIAL=y
+CONFIG_DEBUG_UART_ATMEL=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_ATMEL_USART=y
+CONFIG_TIMER=y
+CONFIG_ATMEL_PIT_TIMER=y
+CONFIG_OF_LIBFDT_OVERLAY=y
-- 
2.9.5