[U-Boot] rk3288 (Tinkerboard) not booting【请注意,邮件由u-boot-bounces at lists.denx.de代发】

Kever Yang kever.yang at rock-chips.com
Mon Sep 23 01:04:49 UTC 2019


Hi Alexander,

     The tinker board already enable TPL, so it should be use TPL 
instead of SPL with mkimage tool.

The idbloader should have including both, if the idbloader boot fail, 
could you share the boot log?


Thanks,
- Kever
On 2019/9/23 上午5:22, Alexander von Gluck IV wrote:
> Using master from git://git.denx.de/u-boot.git
>
> commit 390183b58179ddaf986422f4d9446c596660f7e0 (HEAD -> master, origin/master, origin/HEAD)
> Merge: d6c7309f56 79907a4f84
> Author: Tom Rini <trini at konsulko.com>
> Date:   Sat Sep 21 07:31:23 2019 -0400
>
>      Merge tag 'efi-2019-10-rc4-5' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi
>      
>      Pull request for UEFI sub-system for v2019.10-rc4 (5)
>      
>      This patch set fixes errors in the UEFI sub-system and adds a function to
>      compare u16 strings which is prerequisite for further patches.
>
>
> Same error:
>
>
> $ ./tools/mkimage -n rk3288 -T rksd -d spl/u-boot-spl-dtb.bin out
> Warning: SPL image is too large (size 0xb000) and will not boot
> Error: image verification failed
>
>
> $ ls -lah spl/u-boot-spl-dtb.bin
> -rw-rw-r-- 1 kallisti5 kallisti5 43K Sep 22 16:17 spl/u-boot-spl-dtb.bin
>
>
>
> September 22, 2019 4:03 PM, "Michael Nazzareno Trimarchi" <michael at amarulasolutions.com> wrote:
>
>> Hi
>>
>> Please use the latest uboot. The fixes should be already merged
>>
>> Mcihael
>>
>> On Sun, Sep 22, 2019 at 10:53 PM Alexander von Gluck IV
>> <kallisti5 at unixzen.com> wrote:
>>
>>> Anyone know a way to get a functional u-boot on the rk3288? (Tinkerboard, SD)
>>>
>>> The docs seem to recommend:
>>> $ /tmp/arm-build/tools/mkimage -n rk3288 -T rksd -d arm/tinkerboard/u-boot-spl-dtb.bin out
>>>
>>> However, that produces:
>>> Warning: SPL image is too large (size 0xb000) and will not boot
>>>
>>> I saw this patch to disable I2C in the SPL to reduce its size:
>>> https://github.com/xypron/u-boot-patches/blob/df2ceb65fb4cc433aa17304ed9d3d591c14ef5ac/0001-configs-
>>> inker-rk3288-disable-CONFIG_SPL_I2C_SUPPORT.patch
>>>
>>> However, that breaks the build :-|
>>>
>>> LD spl/u-boot-spl
>>> arm-unknown-haiku-ld.bfd: drivers/built-in.o: in function `rk8xx_write':
>>> /tmp/arm-build/drivers/power/pmic/rk8xx.c:30: undefined reference to `dm_i2c_write'
>>> arm-unknown-haiku-ld.bfd: drivers/built-in.o: in function `rk8xx_read':
>>> /tmp/arm-build/drivers/power/pmic/rk8xx.c:43: undefined reference to `dm_i2c_read'
>>> make[1]: *** [scripts/Makefile.spl:404: spl/u-boot-spl] Error 1
>>> make: *** [Makefile:1762: spl/u-boot-spl] Error 2
>>> make: Leaving directory '/tmp/arm-build'
>>> Disabling SPL Power then results in an error compiling MMC support
>>> Any alternative methods to getting u-boot running from SD?
>>> Rockchip devices seem to be kind of complex to get going :-|
>>> -- Alex
>>> _______________________________________________
>>> U-Boot mailing list
>>> U-Boot at lists.denx.de
>>> https://lists.denx.de/listinfo/u-boot
>> --
>> | Michael Nazzareno Trimarchi Amarula Solutions BV |
>> | COO - Founder Cruquiuskade 47 |
>> | +31(0)851119172 Amsterdam 1018 AM NL |
>> | [`as] http://www.amarulasolutions.com |
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot




More information about the U-Boot mailing list