[U-Boot] [PATCH V2 5/9] imx8: Add support to get container image set size
peng.fan at nxp.com
peng.fan at nxp.com
Mon Sep 23 02:18:44 UTC 2019
From: Peng Fan <peng.fan at nxp.com>
To avoid hardcoded offset when adding u-boot.cnt to flash.bin, we use
flexible offset which is calculated based on the size of the container
image generated int the first stage. And pad u-boot.cnt at 1KB
alignment.
So add code to get the offset when SPL loading u-boot.cnt.
Signed-off-by: Ye Li <ye.li at nxp.com>
Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
V2:
None
arch/arm/mach-imx/Makefile | 9 +-
arch/arm/mach-imx/imx8/Makefile | 2 +-
arch/arm/mach-imx/imx8/image.c | 246 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 255 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/mach-imx/imx8/image.c
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 199b2df22b..46bc2a21e2 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -169,9 +169,16 @@ u-boot.cnt: MKIMAGEOUTPUT = u-boot.cnt.log
ifeq ($(CONFIG_SPL_LOAD_IMX_CONTAINER), y)
u-boot.cnt: u-boot.bin container.cfg FORCE
$(call if_changed,mkimage)
-endif
flash.bin: spl/u-boot-spl.bin FORCE
$(call if_changed,mkimage)
+ @flashbin_size=`wc -c flash.bin | awk '{print $$1}'`; \
+ pad_cnt=$$(((flashbin_size + 0x400 - 1) / 0x400)); \
+ echo "append u-boot.cnt at $$pad_cnt KB"; \
+ dd if=u-boot.cnt of=flash.bin bs=1K seek=$$pad_cnt;
+else
+flash.bin: spl/u-boot-spl.bin FORCE
+ $(call if_changed,mkimage)
+endif
endif
else
diff --git a/arch/arm/mach-imx/imx8/Makefile b/arch/arm/mach-imx/imx8/Makefile
index 97f9d22945..39e384d5c7 100644
--- a/arch/arm/mach-imx/imx8/Makefile
+++ b/arch/arm/mach-imx/imx8/Makefile
@@ -8,5 +8,5 @@ obj-y += cpu.o iomux.o misc.o lowlevel_init.o
obj-$(CONFIG_OF_SYSTEM_SETUP) += fdt.o
ifdef CONFIG_SPL_BUILD
-obj-$(CONFIG_SPL_LOAD_IMX_CONTAINER) += parse-container.o
+obj-$(CONFIG_SPL_LOAD_IMX_CONTAINER) += image.o parse-container.o
endif
diff --git a/arch/arm/mach-imx/imx8/image.c b/arch/arm/mach-imx/imx8/image.c
new file mode 100644
index 0000000000..58a29e8a03
--- /dev/null
+++ b/arch/arm/mach-imx/imx8/image.c
@@ -0,0 +1,246 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <asm/io.h>
+#include <mmc.h>
+#include <spi_flash.h>
+#include <nand.h>
+#include <asm/arch/image.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/mach-imx/boot_mode.h>
+
+#define MMC_DEV 0
+#define QSPI_DEV 1
+#define NAND_DEV 2
+#define QSPI_NOR_DEV 3
+
+static int __get_container_size(ulong addr)
+{
+ struct container_hdr *phdr;
+ struct boot_img_t *img_entry;
+ struct signature_block_hdr *sign_hdr;
+ u8 i = 0;
+ u32 max_offset = 0, img_end;
+
+ phdr = (struct container_hdr *)addr;
+ if (phdr->tag != 0x87 && phdr->version != 0x0) {
+ debug("Wrong container header\n");
+ return -EFAULT;
+ }
+
+ max_offset = sizeof(struct container_hdr);
+
+ img_entry = (struct boot_img_t *)(addr + sizeof(struct container_hdr));
+ for (i = 0; i < phdr->num_images; i++) {
+ img_end = img_entry->offset + img_entry->size;
+ if (img_end > max_offset)
+ max_offset = img_end;
+
+ debug("img[%u], end = 0x%x\n", i, img_end);
+
+ img_entry++;
+ }
+
+ if (phdr->sig_blk_offset != 0) {
+ sign_hdr = (struct signature_block_hdr *)(addr + phdr->sig_blk_offset);
+ u16 len = sign_hdr->length_lsb + (sign_hdr->length_msb << 8);
+
+ if (phdr->sig_blk_offset + len > max_offset)
+ max_offset = phdr->sig_blk_offset + len;
+
+ debug("sigblk, end = 0x%x\n", phdr->sig_blk_offset + len);
+ }
+
+ return max_offset;
+}
+
+static int get_container_size(void *dev, int dev_type, unsigned long offset)
+{
+ u8 *buf = malloc(CONTAINER_HDR_ALIGNMENT);
+ int ret = 0;
+
+ if (!buf) {
+ printf("Malloc buffer failed\n");
+ return -ENOMEM;
+ }
+
+#ifdef CONFIG_SPL_MMC_SUPPORT
+ if (dev_type == MMC_DEV) {
+ unsigned long count = 0;
+ struct mmc *mmc = (struct mmc *)dev;
+
+ count = blk_dread(mmc_get_blk_desc(mmc),
+ offset / mmc->read_bl_len,
+ CONTAINER_HDR_ALIGNMENT / mmc->read_bl_len,
+ buf);
+ if (count == 0) {
+ printf("Read container image from MMC/SD failed\n");
+ return -EIO;
+ }
+ }
+#endif
+
+#ifdef CONFIG_SPL_SPI_LOAD
+ if (dev_type == QSPI_DEV) {
+ struct spi_flash *flash = (struct spi_flash *)dev;
+
+ ret = spi_flash_read(flash, offset,
+ CONTAINER_HDR_ALIGNMENT, buf);
+ if (ret != 0) {
+ printf("Read container image from QSPI failed\n");
+ return -EIO;
+ }
+ }
+#endif
+
+#ifdef CONFIG_SPL_NAND_SUPPORT
+ if (dev_type == NAND_DEV) {
+ ret = nand_spl_load_image(offset, CONTAINER_HDR_ALIGNMENT,
+ buf);
+ if (ret != 0) {
+ printf("Read container image from NAND failed\n");
+ return -EIO;
+ }
+ }
+#endif
+
+#ifdef CONFIG_SPL_NOR_SUPPORT
+ if (dev_type == QSPI_NOR_DEV)
+ memcpy(buf, (const void *)offset, CONTAINER_HDR_ALIGNMENT);
+#endif
+
+ ret = __get_container_size((ulong)buf);
+
+ free(buf);
+
+ return ret;
+}
+
+static unsigned long get_boot_device_offset(void *dev, int dev_type)
+{
+ unsigned long offset = 0;
+
+ if (dev_type == MMC_DEV) {
+ struct mmc *mmc = (struct mmc *)dev;
+
+ if (IS_SD(mmc) || mmc->part_config == MMCPART_NOAVAILABLE) {
+ offset = CONTAINER_HDR_MMCSD_OFFSET;
+ } else {
+ u8 part = EXT_CSD_EXTRACT_BOOT_PART(mmc->part_config);
+
+ if (part == 1 || part == 2) {
+ if (is_imx8qxp() && is_soc_rev(CHIP_REV_B))
+ offset = CONTAINER_HDR_MMCSD_OFFSET;
+ else
+ offset = CONTAINER_HDR_EMMC_OFFSET;
+ } else {
+ offset = CONTAINER_HDR_MMCSD_OFFSET;
+ }
+ }
+ } else if (dev_type == QSPI_DEV) {
+ offset = CONTAINER_HDR_QSPI_OFFSET;
+ } else if (dev_type == NAND_DEV) {
+ offset = CONTAINER_HDR_NAND_OFFSET;
+ } else if (dev_type == QSPI_NOR_DEV) {
+ offset = CONTAINER_HDR_QSPI_OFFSET + 0x08000000;
+ }
+
+ return offset;
+}
+
+static int get_imageset_end(void *dev, int dev_type)
+{
+ unsigned long offset1 = 0, offset2 = 0;
+ int value_container[2];
+
+ offset1 = get_boot_device_offset(dev, dev_type);
+ offset2 = CONTAINER_HDR_ALIGNMENT + offset1;
+
+ value_container[0] = get_container_size(dev, dev_type, offset1);
+ if (value_container[0] < 0) {
+ printf("Parse seco container failed %d\n", value_container[0]);
+ return value_container[0];
+ }
+
+ debug("seco container size 0x%x\n", value_container[0]);
+
+ value_container[1] = get_container_size(dev, dev_type, offset2);
+ if (value_container[1] < 0) {
+ debug("Parse scu container failed %d, only seco container\n",
+ value_container[1]);
+ /* return seco container total size */
+ return value_container[0] + offset1;
+ }
+
+ debug("scu container size 0x%x\n", value_container[1]);
+
+ return value_container[1] + offset2;
+}
+
+#ifdef CONFIG_SPL_SPI_LOAD
+unsigned long spl_spi_get_uboot_offs(struct spi_flash *flash)
+{
+ int end;
+
+ end = get_imageset_end(flash, QSPI_DEV);
+ end = ROUND(end, SZ_1K);
+
+ printf("Load image from QSPI 0x%x\n", end);
+
+ return end;
+}
+#endif
+
+#ifdef CONFIG_SPL_MMC_SUPPORT
+unsigned long spl_mmc_get_uboot_raw_sector(struct mmc *mmc)
+{
+ int end;
+
+ end = get_imageset_end(mmc, MMC_DEV);
+ end = ROUND(end, SZ_1K);
+
+ printf("Load image from MMC/SD 0x%x\n", end);
+
+ return end / mmc->read_bl_len;
+}
+#endif
+
+#ifdef CONFIG_SPL_NAND_SUPPORT
+uint32_t spl_nand_get_uboot_raw_page(void)
+{
+ int end;
+
+ end = get_imageset_end((void *)NULL, NAND_DEV);
+ end = ROUND(end, SZ_16K);
+
+ printf("Load image from NAND 0x%x\n", end);
+
+ return end;
+}
+#endif
+
+#ifdef CONFIG_SPL_NOR_SUPPORT
+unsigned long spl_nor_get_uboot_base(void)
+{
+ int end;
+
+ /* Calculate the image set end,
+ * if it is less than CONFIG_SYS_UBOOT_BASE(0x8281000),
+ * we use CONFIG_SYS_UBOOT_BASE
+ * Otherwise, use the calculated address
+ */
+ end = get_imageset_end((void *)NULL, QSPI_NOR_DEV);
+ if (end <= CONFIG_SYS_UBOOT_BASE)
+ end = CONFIG_SYS_UBOOT_BASE;
+ else
+ end = ROUND(end, SZ_1K);
+
+ printf("Load image from NOR 0x%x\n", end);
+
+ return end;
+}
+#endif
--
2.16.4
More information about the U-Boot
mailing list