[U-Boot] [PATCH 2/2] pico-imx7d: Remove dead code for dm_video

Joris Offouga offougajoris at gmail.com
Mon Sep 23 08:59:04 UTC 2019


Since convert dm_video, unused code introduced, so remove this

Signed-off-by: Joris Offouga <offougajoris at gmail.com>
---
 arch/arm/dts/imx7d-pico-u-boot.dtsi      | 31 ------------------------
 board/technexion/pico-imx7d/pico-imx7d.c | 11 ---------
 2 files changed, 42 deletions(-)

diff --git a/arch/arm/dts/imx7d-pico-u-boot.dtsi b/arch/arm/dts/imx7d-pico-u-boot.dtsi
index ef19de2b30..cc50f38fd6 100644
--- a/arch/arm/dts/imx7d-pico-u-boot.dtsi
+++ b/arch/arm/dts/imx7d-pico-u-boot.dtsi
@@ -4,37 +4,6 @@
         usb0 = &usbotg1;
         display0 = &lcdif;
     };
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_backlight>;
-		pwms = <&pwm4 0 50000 0>;
-		brightness-levels = <0 36 72 108 144 180 216 255>;
-		default-brightness-level = <6>;
-		status = "okay";
-	};
-
-	reg_lcd_3v3: regulator-lcd-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "lcd-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	panel {
-		compatible = "vxt,vl050-8048nt-c01";
-		backlight = <&backlight>;
-		power-supply = <&reg_lcd_3v3>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&display_out>;
-			};
-		};
-	};
 };
 
 &usbotg1 {
diff --git a/board/technexion/pico-imx7d/pico-imx7d.c b/board/technexion/pico-imx7d/pico-imx7d.c
index 32b04b8fd6..ebfe769547 100644
--- a/board/technexion/pico-imx7d/pico-imx7d.c
+++ b/board/technexion/pico-imx7d/pico-imx7d.c
@@ -33,13 +33,6 @@ DECLARE_GLOBAL_DATA_PTR;
 #define I2C_PAD_CTRL    (PAD_CTL_DSE_3P3V_32OHM | PAD_CTL_SRE_SLOW | \
 	PAD_CTL_HYS | PAD_CTL_PUE | PAD_CTL_PUS_PU100KOHM)
 
-
-#define LCD_PAD_CTRL    (PAD_CTL_HYS | PAD_CTL_PUS_PU100KOHM | \
-			 PAD_CTL_DSE_3P3V_49OHM)
-
-#define LCD_SYNC_PAD_CTRL    (PAD_CTL_HYS | PAD_CTL_PUS_PU100KOHM | \
-			      PAD_CTL_DSE_3P3V_196OHM)
-
 #ifdef CONFIG_SYS_I2C_MXC
 #define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
 
@@ -224,10 +217,6 @@ int board_early_init_f(void)
 }
 
 #ifdef CONFIG_DM_VIDEO
-static iomux_v3_cfg_t const lcd_pads[] = {
-	MX7D_PAD_GPIO1_IO11__GPIO1_IO11 | MUX_PAD_CTRL(NO_PAD_CTRL),
-};
-
 void setup_lcd(void)
 {
 	imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads));
-- 
2.17.1



More information about the U-Boot mailing list