[U-Boot] [PATCH v1 2/3] configs: dra7xx_evm: Add Kconfigs for SPL_DFU bootmode

Jean-Jacques Hiblot jjhiblot at ti.com
Tue Sep 24 10:05:01 UTC 2019


From: Faiz Abbas <faiz_abbas at ti.com>

Enable configs for supporting SPL_DFU bootmode.

Signed-off-by: Faiz Abbas <faiz_abbas at ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot at ti.com>
---

 configs/dra7xx_evm_defconfig    | 6 ++++++
 configs/dra7xx_hs_evm_defconfig | 6 ++++++
 2 files changed, 12 insertions(+)

diff --git a/configs/dra7xx_evm_defconfig b/configs/dra7xx_evm_defconfig
index ad8868e512..15dd0e879d 100644
--- a/configs/dra7xx_evm_defconfig
+++ b/configs/dra7xx_evm_defconfig
@@ -25,8 +25,11 @@ CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_SPL_DMA_SUPPORT=y
 CONFIG_SPL_OS_BOOT=y
+CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x40000
+CONFIG_SPL_USB_GADGET=y
+CONFIG_SPL_DFU=y
 CONFIG_CMD_SPL=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_NAND=y
@@ -85,6 +88,7 @@ CONFIG_MII=y
 CONFIG_DRIVER_TI_CPSW=y
 CONFIG_SPL_PHY=y
 CONFIG_PIPE3_PHY=y
+CONFIG_SPL_PIPE3_PHY=y
 CONFIG_OMAP_USB2_PHY=y
 CONFIG_PMIC_PALMAS=y
 CONFIG_PMIC_LP873X=y
@@ -107,7 +111,9 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_DWC3=y
 CONFIG_USB_DWC3_GADGET=y
+CONFIG_USB_DWC3_OMAP=y
 CONFIG_USB_DWC3_GENERIC=y
+CONFIG_USB_DWC3_PHY_OMAP=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
 CONFIG_USB_GADGET_VENDOR_NUM=0x0451
diff --git a/configs/dra7xx_hs_evm_defconfig b/configs/dra7xx_hs_evm_defconfig
index 7a5c3e72d4..e2f0476f9e 100644
--- a/configs/dra7xx_hs_evm_defconfig
+++ b/configs/dra7xx_hs_evm_defconfig
@@ -30,8 +30,11 @@ CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_SPL_DMA_SUPPORT=y
 # CONFIG_SPL_NAND_SUPPORT is not set
+CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x40000
+CONFIG_SPL_USB_GADGET=y
+CONFIG_SPL_DFU=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_NAND=y
 CONFIG_CMD_MTDPARTS=y
@@ -88,6 +91,7 @@ CONFIG_MII=y
 CONFIG_DRIVER_TI_CPSW=y
 CONFIG_SPL_PHY=y
 CONFIG_PIPE3_PHY=y
+CONFIG_SPL_PIPE3_PHY=y
 CONFIG_OMAP_USB2_PHY=y
 CONFIG_PMIC_PALMAS=y
 CONFIG_PMIC_LP873X=y
@@ -110,7 +114,9 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_DWC3=y
 CONFIG_USB_DWC3_GADGET=y
+CONFIG_USB_DWC3_OMAP=y
 CONFIG_USB_DWC3_GENERIC=y
+CONFIG_USB_DWC3_PHY_OMAP=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
 CONFIG_USB_GADGET_VENDOR_NUM=0x0451
-- 
2.17.1



More information about the U-Boot mailing list