[U-Boot] [PATCH 015/126] sandbox: spmi: Add ranges property for address translation

[Simon Glass]

At present address translation does not work since there is no ranges
property in the spmi nodes. Add empty ranges properties and a little more
logging so that this shows the error:

   /tmp/b/sandbox/u-boot -d /tmp/b/sandbox/arch/sandbox/dts/test.dtb \
	-c "ut dm spmi_access_peripheral" -L7 -v
   ...
   pm8916_gpio_probe() bad address: returning err=-22

Signed-off-by: Simon Glass <sjg at chromium.org>
---

 arch/sandbox/dts/test.dts  |  2 ++
 drivers/gpio/pm8916_gpio.c | 12 ++++++------
 2 files changed, 8 insertions(+), 6 deletions(-)

diff --git a/arch/sandbox/dts/test.dts b/arch/sandbox/dts/test.dts
index 208551d7c19..f664b65b72d 100644
--- a/arch/sandbox/dts/test.dts
+++ b/arch/sandbox/dts/test.dts
@@ -717,11 +717,13 @@
 		compatible = "sandbox,spmi";
 		#address-cells = <0x1>;
 		#size-cells = <0x1>;
+		ranges;
 		pm8916 at 0 {
 			compatible = "qcom,spmi-pmic";
 			reg = <0x0 0x1>;
 			#address-cells = <0x1>;
 			#size-cells = <0x1>;
+			ranges;
 
 			spmi_gpios: gpios at c000 {
 				compatible = "qcom,pm8916-gpio";
diff --git a/drivers/gpio/pm8916_gpio.c b/drivers/gpio/pm8916_gpio.c
index bbe214d5eea..74a773c099b 100644
--- a/drivers/gpio/pm8916_gpio.c
+++ b/drivers/gpio/pm8916_gpio.c
@@ -172,16 +172,16 @@ static int pm8916_gpio_probe(struct udevice *dev)
 
 	priv->pid = dev_read_addr(dev);
 	if (priv->pid == FDT_ADDR_T_NONE)
-		return -EINVAL;
+		return log_msg_ret("bad address", -EINVAL);
 
 	/* Do a sanity check */
 	reg = pmic_reg_read(dev->parent, priv->pid + REG_TYPE);
 	if (reg != 0x10)
-		return -ENODEV;
+		return log_msg_ret("bad type", -ENXIO);
 
 	reg = pmic_reg_read(dev->parent, priv->pid + REG_SUBTYPE);
 	if (reg != 0x5 && reg != 0x1)
-		return -ENODEV;
+		return log_msg_ret("bad subtype", -ENXIO);
 
 	return 0;
 }
@@ -257,16 +257,16 @@ static int pm8941_pwrkey_probe(struct udevice *dev)
 
 	priv->pid = devfdt_get_addr(dev);
 	if (priv->pid == FDT_ADDR_T_NONE)
-		return -EINVAL;
+		return log_msg_ret("bad address", -EINVAL);
 
 	/* Do a sanity check */
 	reg = pmic_reg_read(dev->parent, priv->pid + REG_TYPE);
 	if (reg != 0x1)
-		return -ENODEV;
+		return log_msg_ret("bad type", -ENXIO);
 
 	reg = pmic_reg_read(dev->parent, priv->pid + REG_SUBTYPE);
 	if (reg != 0x1)
-		return -ENODEV;
+		return log_msg_ret("bad subtype", -ENXIO);
 
 	return 0;
 }
-- 
2.23.0.444.g18eeb5a265-goog