[U-Boot] [PATCH 057/126] dm: core: Drop fdtdec_get_pci_addr()
Simon Glass
sjg at chromium.org
Wed Sep 25 14:56:41 UTC 2019
This function ise effectively replaced by ofnode_read_pci_addr() which
works with flat tree. Delete it to avoid code duplication.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
drivers/core/fdtaddr.c | 13 ++++------
include/fdtdec.h | 17 -------------
lib/fdtdec.c | 54 ------------------------------------------
3 files changed, 5 insertions(+), 79 deletions(-)
diff --git a/drivers/core/fdtaddr.c b/drivers/core/fdtaddr.c
index c9a941116a3..575798fae93 100644
--- a/drivers/core/fdtaddr.c
+++ b/drivers/core/fdtaddr.c
@@ -202,16 +202,13 @@ fdt_addr_t devfdt_get_addr_pci(struct udevice *dev)
u32 bar;
int ret;
- ret = fdtdec_get_pci_addr(gd->fdt_blob,
- dev_of_offset(dev),
- FDT_PCI_SPACE_MEM32, "reg",
- &pci_addr);
+ ret = ofnode_read_pci_addr(dev_ofnode(dev), FDT_PCI_SPACE_MEM32,
+ "reg", &pci_addr);
if (ret) {
/* try if there is any i/o-mapped register */
- ret = fdtdec_get_pci_addr(gd->fdt_blob,
- dev_of_offset(dev),
- FDT_PCI_SPACE_IO, "reg",
- &pci_addr);
+ ret = ofnode_read_pci_addr(dev_ofnode(dev),
+ FDT_PCI_SPACE_IO, "reg",
+ &pci_addr);
if (ret)
return FDT_ADDR_T_NONE;
}
diff --git a/include/fdtdec.h b/include/fdtdec.h
index 635f53083b7..f1e58f9732d 100644
--- a/include/fdtdec.h
+++ b/include/fdtdec.h
@@ -416,23 +416,6 @@ fdt_addr_t fdtdec_get_addr(const void *blob, int node,
fdt_addr_t fdtdec_get_addr_size(const void *blob, int node,
const char *prop_name, fdt_size_t *sizep);
-/**
- * Look at an address property in a node and return the pci address which
- * corresponds to the given type in the form of fdt_pci_addr.
- * The property must hold one fdt_pci_addr with a lengh.
- *
- * @param blob FDT blob
- * @param node node to examine
- * @param type pci address type (FDT_PCI_SPACE_xxx)
- * @param prop_name name of property to find
- * @param addr returns pci address in the form of fdt_pci_addr
- * @return 0 if ok, -ENOENT if the property did not exist, -EINVAL if the
- * format of the property was invalid, -ENXIO if the requested
- * address type was not found
- */
-int fdtdec_get_pci_addr(const void *blob, int node, enum fdt_pci_space type,
- const char *prop_name, struct fdt_pci_addr *addr);
-
/**
* Look at the compatible property of a device node that represents a PCI
* device and extract pci vendor id and device id from it.
diff --git a/lib/fdtdec.c b/lib/fdtdec.c
index 74430c8b2ff..17736ce6655 100644
--- a/lib/fdtdec.c
+++ b/lib/fdtdec.c
@@ -186,60 +186,6 @@ fdt_addr_t fdtdec_get_addr(const void *blob, int node, const char *prop_name)
}
#if CONFIG_IS_ENABLED(PCI) && defined(CONFIG_DM_PCI)
-int fdtdec_get_pci_addr(const void *blob, int node, enum fdt_pci_space type,
- const char *prop_name, struct fdt_pci_addr *addr)
-{
- const u32 *cell;
- int len;
- int ret = -ENOENT;
-
- debug("%s: %s: ", __func__, prop_name);
-
- /*
- * If we follow the pci bus bindings strictly, we should check
- * the value of the node's parent node's #address-cells and
- * #size-cells. They need to be 3 and 2 accordingly. However,
- * for simplicity we skip the check here.
- */
- cell = fdt_getprop(blob, node, prop_name, &len);
- if (!cell)
- goto fail;
-
- if ((len % FDT_PCI_REG_SIZE) == 0) {
- int num = len / FDT_PCI_REG_SIZE;
- int i;
-
- for (i = 0; i < num; i++) {
- debug("pci address #%d: %08lx %08lx %08lx\n", i,
- (ulong)fdt32_to_cpu(cell[0]),
- (ulong)fdt32_to_cpu(cell[1]),
- (ulong)fdt32_to_cpu(cell[2]));
- if ((fdt32_to_cpu(*cell) & type) == type) {
- addr->phys_hi = fdt32_to_cpu(cell[0]);
- addr->phys_mid = fdt32_to_cpu(cell[1]);
- addr->phys_lo = fdt32_to_cpu(cell[2]);
- break;
- }
-
- cell += (FDT_PCI_ADDR_CELLS +
- FDT_PCI_SIZE_CELLS);
- }
-
- if (i == num) {
- ret = -ENXIO;
- goto fail;
- }
-
- return 0;
- }
-
- ret = -EINVAL;
-
-fail:
- debug("(not found)\n");
- return ret;
-}
-
int fdtdec_get_pci_vendev(const void *blob, int node, u16 *vendor, u16 *device)
{
const char *list, *end;
--
2.23.0.444.g18eeb5a265-goog
More information about the U-Boot
mailing list