[U-Boot] [PATCH 074/126] pci: Add support for p2sb uclass
Simon Glass
sjg at chromium.org
Wed Sep 25 14:56:58 UTC 2019
The Primary-to-Sideband bus (P2SB) is used to access various peripherals
through memory-mapped I/O in a large chunk of PCI space. The space is
segmented into different channels and peripherals are accessed by
device-specific means within those channels. Devices should be added in
the device tree as subnodes of the p2sb.
This adds a uclass and enables it for sandbox.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
configs/sandbox_defconfig | 1 +
configs/sandbox_spl_defconfig | 1 +
drivers/misc/Kconfig | 33 ++++++
drivers/misc/Makefile | 1 +
drivers/misc/p2sb-uclass.c | 199 ++++++++++++++++++++++++++++++++++
include/dm/uclass-id.h | 1 +
include/p2sb.h | 127 ++++++++++++++++++++++
7 files changed, 363 insertions(+)
create mode 100644 drivers/misc/p2sb-uclass.c
create mode 100644 include/p2sb.h
diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig
index f77b9e8a7d1..6f4d8449290 100644
--- a/configs/sandbox_defconfig
+++ b/configs/sandbox_defconfig
@@ -149,6 +149,7 @@ CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_DM_PCI_COMPAT=y
CONFIG_PCI_SANDBOX=y
+CONFIG_P2SB=y
CONFIG_PHY=y
CONFIG_PHY_SANDBOX=y
CONFIG_PINCTRL=y
diff --git a/configs/sandbox_spl_defconfig b/configs/sandbox_spl_defconfig
index 409b8a38d5e..c49e05ec319 100644
--- a/configs/sandbox_spl_defconfig
+++ b/configs/sandbox_spl_defconfig
@@ -135,6 +135,7 @@ CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_DM_PCI_COMPAT=y
CONFIG_PCI_SANDBOX=y
+CONFIG_P2SB=y
CONFIG_PHY=y
CONFIG_PHY_SANDBOX=y
CONFIG_PINCTRL=y
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 8037b6ee2d7..74055a35516 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -217,6 +217,39 @@ config NUVOTON_NCT6102D
disable the legacy UART, the watchdog or other devices
in the Nuvoton Super IO chips on X86 platforms.
+config P2SB
+ bool "Intel Primary-to-Sideband Bus"
+ depends on X86 || SANDBOX
+ help
+ This enables support for the Intel Primary-to-Sideband bus,
+ abbreviated to P2SB. The P2SB is used to access various peripherals
+ such as eSPI, GPIO, through memory-mapped I/O in a large chunk of PCI
+ space. The space is segmented into different channels and peripherals
+ are accessed by device-specific means within those channels. Devices
+ should be added in the device tree as subnodes of the P2SB. A
+ Peripheral Channel Register? (PCR) API is provided to access those
+ devices - see pcr_readl(), etc.
+
+config SPL_P2SB
+ bool "Intel Primary-to-Sideband Bus in SPL"
+ depends on SPL && (X86 || SANDBOX)
+ help
+ The Primary-to-Sideband bus is used to access various peripherals
+ through memory-mapped I/O in a large chunk of PCI space. The space is
+ segmented into different channels and peripherals are accessed by
+ device-specific means within those channels. Devices should be added
+ in the device tree as subnodes of the p2sb.
+
+config TPL_P2SB
+ bool "Intel Primary-to-Sideband Bus in TPL"
+ depends on TPL && (X86 || SANDBOX)
+ help
+ The Primary-to-Sideband bus is used to access various peripherals
+ through memory-mapped I/O in a large chunk of PCI space. The space is
+ segmented into different channels and peripherals are accessed by
+ device-specific means within those channels. Devices should be added
+ in the device tree as subnodes of the p2sb.
+
config PWRSEQ
bool "Enable power-sequencing drivers"
depends on DM
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 0001d105bae..840d9fa5e39 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -49,6 +49,7 @@ obj-$(CONFIG_MXC_OCOTP) += mxc_ocotp.o
obj-$(CONFIG_MXS_OCOTP) += mxs_ocotp.o
obj-$(CONFIG_NS87308) += ns87308.o
obj-$(CONFIG_NUVOTON_NCT6102D) += nuvoton_nct6102d.o
+obj-$(CONFIG_P2SB) += p2sb-uclass.o
obj-$(CONFIG_PCA9551_LED) += pca9551_led.o
obj-$(CONFIG_$(SPL_)PWRSEQ) += pwrseq-uclass.o
obj-$(CONFIG_QFW) += qfw.o
diff --git a/drivers/misc/p2sb-uclass.c b/drivers/misc/p2sb-uclass.c
new file mode 100644
index 00000000000..7915eb5c3ed
--- /dev/null
+++ b/drivers/misc/p2sb-uclass.c
@@ -0,0 +1,199 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Uclass for Primary-to-sideband bus, used to access various peripherals
+ *
+ * Copyright 2019 Google LLC
+ * Written by Simon Glass <sjg at chromium.org>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <mapmem.h>
+#include <p2sb.h>
+#include <asm/io.h>
+#include <dm/uclass-internal.h>
+
+#define PCR_COMMON_IOSF_1_0 1
+
+static void *_pcr_reg_address(struct udevice *dev, uint offset)
+{
+ struct p2sb_child_platdata *pplat = dev_get_parent_platdata(dev);
+ struct udevice *p2sb = dev_get_parent(dev);
+ struct p2sb_uc_priv *upriv = dev_get_uclass_priv(p2sb);
+ uintptr_t reg_addr;
+
+ /* Create an address based off of port id and offset */
+ reg_addr = upriv->mmio_base;
+ reg_addr += pplat->pid << PCR_PORTID_SHIFT;
+ reg_addr += offset;
+
+ return map_sysmem(reg_addr, 4);
+}
+
+/*
+ * The mapping of addresses via the SBREG_BAR assumes the IOSF-SB
+ * agents are using 32-bit aligned accesses for their configuration
+ * registers. For IOSF versions greater than 1_0, IOSF-SB
+ * agents can use any access (8/16/32 bit aligned) for their
+ * configuration registers
+ */
+static inline void check_pcr_offset_align(uint offset, uint size)
+{
+ const size_t align = PCR_COMMON_IOSF_1_0 ? sizeof(uint32_t) : size;
+
+ assert(IS_ALIGNED(offset, align));
+}
+
+uint pcr_read32(struct udevice *dev, uint offset)
+{
+ void *ptr;
+ uint val;
+
+ /* Ensure the PCR offset is correctly aligned */
+ assert(IS_ALIGNED(offset, sizeof(uint32_t)));
+
+ ptr = _pcr_reg_address(dev, offset);
+ val = readl(ptr);
+ unmap_sysmem(ptr);
+
+ return val;
+}
+
+uint pcr_read16(struct udevice *dev, uint offset)
+{
+ /* Ensure the PCR offset is correctly aligned */
+ check_pcr_offset_align(offset, sizeof(uint16_t));
+
+ return readw(_pcr_reg_address(dev, offset));
+}
+
+uint pcr_read8(struct udevice *dev, uint offset)
+{
+ /* Ensure the PCR offset is correctly aligned */
+ check_pcr_offset_align(offset, sizeof(uint8_t));
+
+ return readb(_pcr_reg_address(dev, offset));
+}
+
+/*
+ * After every write one needs to perform a read an innocuous register to
+ * ensure the writes are completed for certain ports. This is done for
+ * all ports so that the callers don't need the per-port knowledge for
+ * each transaction.
+ */
+static void write_completion(struct udevice *dev, uint offset)
+{
+ readl(_pcr_reg_address(dev, ALIGN_DOWN(offset, sizeof(uint32_t))));
+}
+
+void pcr_write32(struct udevice *dev, uint offset, uint indata)
+{
+ /* Ensure the PCR offset is correctly aligned */
+ assert(IS_ALIGNED(offset, sizeof(indata)));
+
+ writel(indata, _pcr_reg_address(dev, offset));
+ /* Ensure the writes complete */
+ write_completion(dev, offset);
+}
+
+void pcr_write16(struct udevice *dev, uint offset, uint indata)
+{
+ /* Ensure the PCR offset is correctly aligned */
+ check_pcr_offset_align(offset, sizeof(uint16_t));
+
+ writew(indata, _pcr_reg_address(dev, offset));
+ /* Ensure the writes complete */
+ write_completion(dev, offset);
+}
+
+void pcr_write8(struct udevice *dev, uint offset, uint indata)
+{
+ /* Ensure the PCR offset is correctly aligned */
+ check_pcr_offset_align(offset, sizeof(uint8_t));
+
+ writeb(indata, _pcr_reg_address(dev, offset));
+ /* Ensure the writes complete */
+ write_completion(dev, offset);
+}
+
+void pcr_clrsetbits32(struct udevice *dev, uint offset, uint clr, uint set)
+{
+ uint data32;
+
+ data32 = pcr_read32(dev, offset);
+ data32 &= ~clr;
+ data32 |= set;
+ pcr_write32(dev, offset, data32);
+}
+
+void pcr_clrsetbits16(struct udevice *dev, uint offset, uint clr, uint set)
+{
+ uint data16;
+
+ data16 = pcr_read16(dev, offset);
+ data16 &= ~clr;
+ data16 |= set;
+ pcr_write16(dev, offset, data16);
+}
+
+void pcr_clrsetbits8(struct udevice *dev, uint offset, uint clr, uint set)
+{
+ uint data8;
+
+ data8 = pcr_read8(dev, offset);
+ data8 &= ~clr;
+ data8 |= set;
+ pcr_write8(dev, offset, data8);
+}
+
+int p2sb_set_port_id(struct udevice *dev, int portid)
+{
+ struct udevice *ps2b;
+ struct p2sb_child_platdata *pplat;
+
+ if (!CONFIG_IS_ENABLED(OF_PLATDATA))
+ return -ENOSYS;
+
+ uclass_find_first_device(UCLASS_P2SB, &ps2b);
+ if (!ps2b)
+ return -EDEADLK;
+ dev->parent = ps2b;
+
+ /*
+ * We must allocate this, since when the device was bound it did not
+ * have a parent.
+ * TODO(sjg at chromium.org): Add a parent pointer to child devices in dtoc
+ */
+ dev->parent_platdata = malloc(sizeof(*pplat));
+ if (!dev->parent_platdata)
+ return -ENOMEM;
+ pplat = dev_get_parent_platdata(dev);
+ pplat->pid = portid;
+
+ return 0;
+}
+
+static int p2sb_child_post_bind(struct udevice *dev)
+{
+#if !CONFIG_IS_ENABLED(OF_PLATDATA)
+ struct p2sb_child_platdata *pplat = dev_get_parent_platdata(dev);
+ int ret;
+ u32 pid;
+
+ ret = dev_read_u32(dev, "intel,p2sb-port-id", &pid);
+ if (ret)
+ return ret;
+ pplat->pid = pid;
+#endif
+
+ return 0;
+}
+
+UCLASS_DRIVER(p2sb) = {
+ .id = UCLASS_P2SB,
+ .name = "p2sb",
+ .per_device_auto_alloc_size = sizeof(struct p2sb_uc_priv),
+ .child_post_bind = p2sb_child_post_bind,
+ .per_child_platdata_auto_alloc_size =
+ sizeof(struct p2sb_child_platdata),
+};
diff --git a/include/dm/uclass-id.h b/include/dm/uclass-id.h
index 907fe257ad1..496570ff47d 100644
--- a/include/dm/uclass-id.h
+++ b/include/dm/uclass-id.h
@@ -68,6 +68,7 @@ enum uclass_id {
UCLASS_NOP, /* No-op devices */
UCLASS_NORTHBRIDGE, /* Intel Northbridge / SDRAM controller */
UCLASS_NVME, /* NVM Express device */
+ UCLASS_P2SB, /* (x86) Primary-to-Sideband Bus */
UCLASS_PANEL, /* Display panel, such as an LCD */
UCLASS_PANEL_BACKLIGHT, /* Backlight controller for panel */
UCLASS_PCH, /* x86 platform controller hub */
diff --git a/include/p2sb.h b/include/p2sb.h
new file mode 100644
index 00000000000..370f127058c
--- /dev/null
+++ b/include/p2sb.h
@@ -0,0 +1,127 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2019 Google LLC
+ * Written by Simon Glass <sjg at chromium.org>
+ */
+
+#ifndef __p2sb_h
+#define __p2sb_h
+
+/* Port Id lives in bits 23:16 and register offset lives in 15:0 of address */
+#define PCR_PORTID_SHIFT 16
+
+/**
+ * struct p2sb_child_platdata - Information about each child of a p2sb device
+ *
+ * @pid: Port ID for this child
+ */
+struct p2sb_child_platdata {
+ uint pid;
+};
+
+/**
+ * struct p2sb_uc_priv - information for the uclass about each device
+ *
+ * This must be set up by the driver when it is probed
+ *
+ * @mmio_base: Base address of P2SB region
+ */
+struct p2sb_uc_priv {
+ uint mmio_base;
+};
+
+/**
+ * struct p2sb_ops - Operations for the P2SB (none at present)
+ */
+struct p2sb_ops {
+};
+
+#define p2sb_get_ops(dev) ((struct p2sb_ops *)(dev)->driver->ops)
+
+/**
+ * pcr_read32/16/8() - Read from a PCR device
+ *
+ * Reads data from a PCR device within the P2SB
+ *
+ * @dev: Device to read from
+ * @offset: Offset within device to read
+ * @return value read
+ */
+uint pcr_read32(struct udevice *dev, uint offset);
+uint pcr_read16(struct udevice *dev, uint offset);
+uint pcr_read8(struct udevice *dev, uint offset);
+
+/**
+ * pcr_read32/16/8() - Write to a PCR device
+ *
+ * Writes data to a PCR device within the P2SB
+ *
+ * @dev: Device to write to
+ * @offset: Offset within device to write
+ * @data: Data to write
+ */
+void pcr_write32(struct udevice *dev, uint offset, uint data);
+void pcr_write16(struct udevice *dev, uint offset, uint data);
+void pcr_write8(struct udevice *dev, uint offset, uint data);
+
+/**
+ * pcr_clrsetbits32/16/8() - Update a PCR device
+ *
+ * Updates dat in a PCR device within the P2SB
+ *
+ * This reads from the device, clears and set bits, then writes back.
+ *
+ * new_data = (old_data & ~clr) | set
+ *
+ * @dev: Device to update
+ * @offset: Offset within device to update
+ * @clr: Bits to clear after reading
+ * @set: Bits to set before writing
+ */
+void pcr_clrsetbits32(struct udevice *dev, uint offset, uint clr, uint set);
+void pcr_clrsetbits16(struct udevice *dev, uint offset, uint clr, uint set);
+void pcr_clrsetbits8(struct udevice *dev, uint offset, uint clr, uint set);
+
+static inline void pcr_setbits32(struct udevice *dev, uint offset, uint set)
+{
+ return pcr_clrsetbits32(dev, offset, 0, set);
+}
+
+static inline void pcr_setbits16(struct udevice *dev, uint offset, uint set)
+{
+ return pcr_clrsetbits16(dev, offset, 0, set);
+}
+
+static inline void pcr_setbits8(struct udevice *dev, uint offset, uint set)
+{
+ return pcr_clrsetbits8(dev, offset, 0, set);
+}
+
+static inline void pcr_clrbits32(struct udevice *dev, uint offset, uint clr)
+{
+ return pcr_clrsetbits32(dev, offset, clr, 0);
+}
+
+static inline void pcr_clrbits16(struct udevice *dev, uint offset, uint clr)
+{
+ return pcr_clrsetbits16(dev, offset, clr, 0);
+}
+
+static inline void pcr_clrbits8(struct udevice *dev, uint offset, uint clr)
+{
+ return pcr_clrsetbits8(dev, offset, clr, 0);
+}
+
+/**
+ * p2sb_set_port_id() - Set the port ID for a p2sb child device
+ *
+ * This must be called in a device's bind() method when OF_PLATDATA is used
+ * since the uclass cannot access the device's of-platdata.
+ *
+ * @dev: Child device (whose parent is UCLASS_P2SB)
+ * @portid: Port ID of child device
+ * @return 0 if OK, -ENODEV is the p2sb device could not be found
+ */
+int p2sb_set_port_id(struct udevice *dev, int portid);
+
+#endif
--
2.23.0.444.g18eeb5a265-goog
More information about the U-Boot
mailing list