[U-Boot] [PATCH v4 1/6] dm: regulator: support regulator more state
Elaine Zhang
zhangqing at rock-chips.com
Thu Sep 26 07:43:52 UTC 2019
From: Joseph Chen <chenjh at rock-chips.com>
support parse regulator standard property:
regulator-off-in-suspend;
regulator-init-microvolt;
regulator-suspend-microvolt:
regulator_get_suspend_enable
regulator_set_suspend_enable
regulator_get_suspend_value
regulator_set_suspend_value
Signed-off-by: Joseph Chen <chenjh at rock-chips.com>
Signed-off-by: Elaine Zhang <zhangqing at rock-chips.com>
Reviewed-by: Kever Yang<kever.yang at rock-chips.com>
---
doc/device-tree-bindings/regulator/regulator.txt | 27 +++++++++
drivers/power/regulator/regulator-uclass.c | 70 ++++++++++++++++++++++++
include/power/regulator.h | 64 ++++++++++++++++++++++
test/dm/regulator.c | 46 ++++++++++++++++
4 files changed, 207 insertions(+)
diff --git a/doc/device-tree-bindings/regulator/regulator.txt b/doc/device-tree-bindings/regulator/regulator.txt
index 4ba642b7c77f..6c9a02120fde 100644
--- a/doc/device-tree-bindings/regulator/regulator.txt
+++ b/doc/device-tree-bindings/regulator/regulator.txt
@@ -36,6 +36,28 @@ Optional properties:
- regulator-always-on: regulator should never be disabled
- regulator-boot-on: enabled by bootloader/firmware
- regulator-ramp-delay: ramp delay for regulator (in uV/us)
+- regulator-init-microvolt: a init allowed Voltage value
+- regulator-state-(standby|mem|disk)
+ type: object
+ description:
+ sub-nodes for regulator state in Standby, Suspend-to-RAM, and
+ Suspend-to-DISK modes. Equivalent with standby, mem, and disk Linux
+ sleep states.
+
+ properties:
+ regulator-on-in-suspend:
+ description: regulator should be on in suspend state.
+ type: boolean
+
+ regulator-off-in-suspend:
+ description: regulator should be off in suspend state.
+ type: boolean
+
+ regulator-suspend-microvolt:
+ description: the default voltage which regulator would be set in
+ suspend. This property is now deprecated, instead setting voltage
+ for suspend mode via the API which regulator driver provides is
+ recommended.
Note
The "regulator-name" constraint is used for setting the device's uclass
@@ -59,7 +81,12 @@ ldo0 {
regulator-max-microvolt = <1800000>;
regulator-min-microamp = <100000>;
regulator-max-microamp = <100000>;
+ regulator-init-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
regulator-ramp-delay = <12000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
};
diff --git a/drivers/power/regulator/regulator-uclass.c b/drivers/power/regulator/regulator-uclass.c
index 76be95bcd159..b49c0829ed31 100644
--- a/drivers/power/regulator/regulator-uclass.c
+++ b/drivers/power/regulator/regulator-uclass.c
@@ -77,6 +77,33 @@ int regulator_set_value(struct udevice *dev, int uV)
return ret;
}
+int regulator_set_suspend_value(struct udevice *dev, int uV)
+{
+ const struct dm_regulator_ops *ops = dev_get_driver_ops(dev);
+ struct dm_regulator_uclass_platdata *uc_pdata;
+
+ uc_pdata = dev_get_uclass_platdata(dev);
+ if (uc_pdata->min_uV != -ENODATA && uV < uc_pdata->min_uV)
+ return -EINVAL;
+ if (uc_pdata->max_uV != -ENODATA && uV > uc_pdata->max_uV)
+ return -EINVAL;
+
+ if (!ops->set_suspend_value)
+ return -ENOSYS;
+
+ return ops->set_suspend_value(dev, uV);
+}
+
+int regulator_get_suspend_value(struct udevice *dev)
+{
+ const struct dm_regulator_ops *ops = dev_get_driver_ops(dev);
+
+ if (!ops->get_suspend_value)
+ return -ENOSYS;
+
+ return ops->get_suspend_value(dev);
+}
+
/*
* To be called with at most caution as there is no check
* before setting the actual voltage value.
@@ -170,6 +197,26 @@ int regulator_set_enable_if_allowed(struct udevice *dev, bool enable)
return ret;
}
+int regulator_set_suspend_enable(struct udevice *dev, bool enable)
+{
+ const struct dm_regulator_ops *ops = dev_get_driver_ops(dev);
+
+ if (!ops->set_suspend_enable)
+ return -ENOSYS;
+
+ return ops->set_suspend_enable(dev, enable);
+}
+
+int regulator_get_suspend_enable(struct udevice *dev)
+{
+ const struct dm_regulator_ops *ops = dev_get_driver_ops(dev);
+
+ if (!ops->get_suspend_enable)
+ return -ENOSYS;
+
+ return ops->get_suspend_enable(dev);
+}
+
int regulator_get_mode(struct udevice *dev)
{
const struct dm_regulator_ops *ops = dev_get_driver_ops(dev);
@@ -235,6 +282,14 @@ int regulator_autoset(struct udevice *dev)
int ret = 0;
uc_pdata = dev_get_uclass_platdata(dev);
+
+ ret = regulator_set_suspend_enable(dev, uc_pdata->suspend_on);
+ if (!ret && uc_pdata->suspend_on) {
+ ret = regulator_set_suspend_value(dev, uc_pdata->suspend_uV);
+ if (!ret)
+ return ret;
+ }
+
if (!uc_pdata->always_on && !uc_pdata->boot_on)
return -EMEDIUMTYPE;
@@ -243,6 +298,8 @@ int regulator_autoset(struct udevice *dev)
if (uc_pdata->flags & REGULATOR_FLAG_AUTOSET_UV)
ret = regulator_set_value(dev, uc_pdata->min_uV);
+ if (uc_pdata->init_uV > 0)
+ ret = regulator_set_value(dev, uc_pdata->init_uV);
if (!ret && (uc_pdata->flags & REGULATOR_FLAG_AUTOSET_UA))
ret = regulator_set_current(dev, uc_pdata->min_uA);
@@ -363,6 +420,7 @@ static int regulator_post_bind(struct udevice *dev)
static int regulator_pre_probe(struct udevice *dev)
{
struct dm_regulator_uclass_platdata *uc_pdata;
+ ofnode node;
uc_pdata = dev_get_uclass_platdata(dev);
if (!uc_pdata)
@@ -373,6 +431,8 @@ static int regulator_pre_probe(struct udevice *dev)
-ENODATA);
uc_pdata->max_uV = dev_read_u32_default(dev, "regulator-max-microvolt",
-ENODATA);
+ uc_pdata->init_uV = dev_read_u32_default(dev, "regulator-init-microvolt",
+ -ENODATA);
uc_pdata->min_uA = dev_read_u32_default(dev, "regulator-min-microamp",
-ENODATA);
uc_pdata->max_uA = dev_read_u32_default(dev, "regulator-max-microamp",
@@ -382,6 +442,16 @@ static int regulator_pre_probe(struct udevice *dev)
uc_pdata->ramp_delay = dev_read_u32_default(dev, "regulator-ramp-delay",
0);
+ node = dev_read_subnode(dev, "regulator-state-mem");
+ if (ofnode_valid(node)) {
+ uc_pdata->suspend_on = !ofnode_read_bool(node, "regulator-off-in-suspend");
+ if (ofnode_read_u32(node, "regulator-suspend-microvolt", &uc_pdata->suspend_uV))
+ uc_pdata->suspend_uV = uc_pdata->max_uA;
+ } else {
+ uc_pdata->suspend_on = true;
+ uc_pdata->suspend_uV = uc_pdata->max_uA;
+ }
+
/* Those values are optional (-ENODATA if unset) */
if ((uc_pdata->min_uV != -ENODATA) &&
(uc_pdata->max_uV != -ENODATA) &&
diff --git a/include/power/regulator.h b/include/power/regulator.h
index 6c6e2cd4f996..dd61eb4ccbde 100644
--- a/include/power/regulator.h
+++ b/include/power/regulator.h
@@ -168,6 +168,7 @@ struct dm_regulator_uclass_platdata {
int mode_count;
int min_uV;
int max_uV;
+ int init_uV;
int min_uA;
int max_uA;
unsigned int ramp_delay;
@@ -177,6 +178,8 @@ struct dm_regulator_uclass_platdata {
int flags;
u8 ctrl_reg;
u8 volt_reg;
+ bool suspend_on;
+ u32 suspend_uV;
};
/* Regulator device operations */
@@ -194,6 +197,19 @@ struct dm_regulator_ops {
int (*set_value)(struct udevice *dev, int uV);
/**
+ * The regulator suspend output value function calls operates
+ * on a micro Volts.
+ *
+ * get/set_suspen_value - get/set suspend mode output value
+ * @dev - regulator device
+ * Sets:
+ * @uV - set the suspend output value [micro Volts]
+ * @return output value [uV] on success or negative errno if fail.
+ */
+ int (*set_suspend_value)(struct udevice *dev, int uV);
+ int (*get_suspend_value)(struct udevice *dev);
+
+ /**
* The regulator output current function calls operates on a micro Amps.
*
* get/set_current - get/set output current of the given output number
@@ -218,6 +234,19 @@ struct dm_regulator_ops {
int (*set_enable)(struct udevice *dev, bool enable);
/**
+ * The most basic feature of the regulator output is its enable state
+ * in suspend mode.
+ *
+ * get/set_suspend_enable - get/set enable state of the suspend output
+ * @dev - regulator device
+ * Sets:
+ * @enable - set true - enable or false - disable
+ * @return true/false for get or -errno if fail; 0 / -errno for set.
+ */
+ int (*set_suspend_enable)(struct udevice *dev, bool enable);
+ int (*get_suspend_enable)(struct udevice *dev);
+
+ /**
* The 'get/set_mode()' function calls should operate on a driver-
* specific mode id definitions, which should be found in:
* field 'id' of struct dm_regulator_mode.
@@ -262,6 +291,23 @@ int regulator_get_value(struct udevice *dev);
int regulator_set_value(struct udevice *dev, int uV);
/**
+ * regulator_set_suspend_value: set the suspend microvoltage value of a given regulator.
+ *
+ * @dev - pointer to the regulator device
+ * @uV - the output suspend value to set [micro Volts]
+ * @return - 0 on success or -errno val if fails
+ */
+int regulator_set_suspend_value(struct udevice *dev, int uV);
+
+/**
+ * regulator_get_suspend_value: get the suspend microvoltage value of a given regulator.
+ *
+ * @dev - pointer to the regulator device
+ * @return - positive output value [uV] on success or negative errno if fail.
+ */
+int regulator_get_suspend_value(struct udevice *dev);
+
+/**
* regulator_set_value_force: set the microvoltage value of a given regulator
* without any min-,max condition check
*
@@ -317,6 +363,24 @@ int regulator_set_enable(struct udevice *dev, bool enable);
int regulator_set_enable_if_allowed(struct udevice *dev, bool enable);
/**
+ * regulator_set_suspend_enable: set regulator suspend enable state
+ *
+ * @dev - pointer to the regulator device
+ * @enable - set true or false
+ * @return - 0 on success or -errno val if fails
+ */
+int regulator_set_suspend_enable(struct udevice *dev, bool enable);
+
+
+/**
+ * regulator_get_suspend_enable: get regulator suspend enable state
+ *
+ * @dev - pointer to the regulator device
+ * @return - true/false of enable state or -errno val if fails
+ */
+int regulator_get_suspend_enable(struct udevice *dev);
+
+/**
* regulator_get_mode: get active operation mode id of a given regulator
*
* @dev - pointer to the regulator device
diff --git a/test/dm/regulator.c b/test/dm/regulator.c
index e510539542b6..1641aff77cb6 100644
--- a/test/dm/regulator.c
+++ b/test/dm/regulator.c
@@ -215,6 +215,52 @@ static int dm_test_power_regulator_set_get_mode(struct unit_test_state *uts)
}
DM_TEST(dm_test_power_regulator_set_get_mode, DM_TESTF_SCAN_FDT);
+/* Test regulator set and get suspend Voltage method */
+static int dm_test_power_regulator_set_get_suspend_voltage(struct unit_test_state *uts)
+{
+ struct dm_regulator_uclass_platdata *uc_pdata;
+ struct udevice *dev;
+ const char *platname;
+ int val_set, val_get;
+
+ /* Set and get Voltage of BUCK1 - set to 'min' constraint */
+ platname = regulator_names[BUCK1][PLATNAME];
+ ut_assertok(regulator_get_by_platname(platname, &dev));
+
+ uc_pdata = dev_get_uclass_platdata(dev);
+ ut_assert(uc_pdata);
+
+ val_set = uc_pdata->min_uV;
+ ut_assertok(regulator_set_suspend_value(dev, val_set));
+
+ val_get = regulator_get_suspend_value(dev);
+ ut_assert(val_get >= 0);
+
+ ut_asserteq(val_set, val_get);
+
+ return 0;
+}
+DM_TEST(dm_test_power_regulator_set_get_suspend_voltage, DM_TESTF_SCAN_FDT);
+
+/* Test regulator set and get suspend Enable method */
+static int dm_test_power_regulator_set_get_suspend_enable(struct unit_test_state *uts)
+{
+ const char *platname;
+ struct udevice *dev;
+ bool val_set = true;
+
+ /* Set the Enable of LDO1 - default is disabled */
+ platname = regulator_names[LDO1][PLATNAME];
+ ut_assertok(regulator_get_by_platname(platname, &dev));
+ ut_assertok(regulator_set_suspend_enable(dev, val_set));
+
+ /* Get the Enable state of LDO1 and compare it with the requested one */
+ ut_asserteq(regulator_get_suspend_enable(dev), val_set);
+
+ return 0;
+}
+DM_TEST(dm_test_power_regulator_set_get_suspend_enable, DM_TESTF_SCAN_FDT);
+
/* Test regulator autoset method */
static int dm_test_power_regulator_autoset(struct unit_test_state *uts)
{
--
1.9.1
More information about the U-Boot
mailing list