[U-Boot] [PATCH v2 1/5] arm: k3: Add support for printing CPUINFO

[Lokesh Vutla]

Add support for printing CPU info for all K3 devices.

Signed-off-by: Lokesh Vutla <lokeshvutla at ti.com>
---
 arch/arm/mach-k3/common.c                | 42 ++++++++++++++++++++++++
 arch/arm/mach-k3/common.h                |  6 ++++
 arch/arm/mach-k3/include/mach/hardware.h | 18 ++++++++++
 3 files changed, 66 insertions(+)

diff --git a/arch/arm/mach-k3/common.c b/arch/arm/mach-k3/common.c
index 3e36d90ace..2b6c7d237e 100644
--- a/arch/arm/mach-k3/common.c
+++ b/arch/arm/mach-k3/common.c
@@ -14,6 +14,8 @@
 #include <linux/soc/ti/ti_sci_protocol.h>
 #include <fdt_support.h>
 #include <asm/arch/sys_proto.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
 
 struct ti_sci_handle *get_ti_sci_handle(void)
 {
@@ -144,3 +146,43 @@ void reset_cpu(ulong ignored)
 {
 }
 #endif
+
+#if defined(CONFIG_DISPLAY_CPUINFO)
+int print_cpuinfo(void)
+{
+	u32 soc, rev;
+	char *name;
+
+	soc = (readl(CTRLMMR_WKUP_JTAG_DEVICE_ID) &
+		DEVICE_ID_FAMILY_MASK) >> DEVICE_ID_FAMILY_SHIFT;
+	rev = (readl(CTRLMMR_WKUP_JTAG_ID) &
+		JTAG_ID_VARIANT_MASK) >> JTAG_ID_VARIANT_SHIFT;
+
+	printf("SoC:   ");
+	switch (soc) {
+	case AM654:
+		name = "AM654";
+		break;
+	case J721E:
+		name = "J721E";
+		break;
+	default:
+		name = "Unknown Silicon";
+	};
+
+	printf("%s PG ", name);
+	switch (rev) {
+	case REV_PG1_0:
+		name = "1.0";
+		break;
+	case REV_PG2_0:
+		name = "2.0";
+		break;
+	default:
+		name = "Unknown Revision";
+	};
+	printf("%s\n", name);
+
+	return 0;
+}
+#endif
diff --git a/arch/arm/mach-k3/common.h b/arch/arm/mach-k3/common.h
index ac7e80d9af..1db253c8c6 100644
--- a/arch/arm/mach-k3/common.h
+++ b/arch/arm/mach-k3/common.h
@@ -8,4 +8,10 @@
 
 #include <asm/armv7_mpu.h>
 
+#define AM654	2
+#define J721E	4
+
+#define REV_PG1_0	0
+#define REV_PG2_0	1
+
 void setup_k3_mpu_regions(void);
diff --git a/arch/arm/mach-k3/include/mach/hardware.h b/arch/arm/mach-k3/include/mach/hardware.h
index 4e629822aa..d670d5a56e 100644
--- a/arch/arm/mach-k3/include/mach/hardware.h
+++ b/arch/arm/mach-k3/include/mach/hardware.h
@@ -13,4 +13,22 @@
 #ifdef CONFIG_SOC_K3_J721E
 #include "j721e_hardware.h"
 #endif
+
+/* Assuming these addresses and definitions stay common across K3 devices */
+#define CTRLMMR_WKUP_JTAG_DEVICE_ID	0x43000018
+#define DEVICE_ID_FAMILY_SHIFT	26
+#define DEVICE_ID_FAMILY_MASK	(0x3f << 26)
+#define DEVICE_ID_BASE_SHIFT	11
+#define DEVICE_ID_BASE_MASK	(0x1fff << 11)
+#define DEVICE_ID_SPEED_SHIFT	6
+#define DEVICE_ID_SPEED_MASK	(0x1f << 6)
+#define DEVICE_ID_TEMP_SHIFT	3
+#define DEVICE_ID_TEMP_MASK	(0x7 << 3)
+
+#define CTRLMMR_WKUP_JTAG_ID		0x43000014
+#define JTAG_ID_VARIANT_SHIFT	28
+#define JTAG_ID_VARIANT_MASK	(0xf << 28)
+#define JTAG_ID_PARTNO_SHIFT	12
+#define JTAG_ID_PARTNO_MASK	(0x7ff << 1)
+
 #endif /* _ASM_ARCH_HARDWARE_H_ */
-- 
2.23.0