[U-Boot] [PATCH 09/13] arm64: zynqmp: use firmware driver to get version

[Michal Simek]

From: Ibai Erkiaga <ibai.erkiaga-elorza at xilinx.com>

Use the new function from firmware version to get the firmware version.

Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza at xilinx.com>
Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---

 board/xilinx/zynqmp/zynqmp.c | 2 +-
 drivers/fpga/zynqmppl.c      | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c
index d9186f463f20..8a66d3e50aad 100644
--- a/board/xilinx/zynqmp/zynqmp.c
+++ b/board/xilinx/zynqmp/zynqmp.c
@@ -321,7 +321,7 @@ int board_early_init_f(void)
 #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_CLK_ZYNQMP)
 	u32 pm_api_version;
 
-	pm_api_version = zynqmp_pmufw_version();
+	pm_api_version = zynqmp_firmware_version();
 	printf("PMUFW:\tv%d.%d\n",
 	       pm_api_version >> ZYNQMP_PM_VERSION_MAJOR_SHIFT,
 	       pm_api_version & ZYNQMP_PM_VERSION_MINOR_MASK);
diff --git a/drivers/fpga/zynqmppl.c b/drivers/fpga/zynqmppl.c
index 6168626aeef3..c2670271c8ea 100644
--- a/drivers/fpga/zynqmppl.c
+++ b/drivers/fpga/zynqmppl.c
@@ -152,7 +152,7 @@ static ulong zynqmp_align_dma_buffer(u32 *buf, u32 len, u32 swap)
 
 		buf = new_buf;
 	} else if ((swap != SWAP_DONE) &&
-		   (zynqmp_pmufw_version() <= PMUFW_V1_0)) {
+		   (zynqmp_firmware_version() <= PMUFW_V1_0)) {
 		/* For bitstream which are aligned */
 		new_buf = buf;
 
@@ -205,7 +205,7 @@ static int zynqmp_load(xilinx_desc *desc, const void *buf, size_t bsize,
 	u32 ret_payload[PAYLOAD_ARG_CNT];
 	bool xilfpga_old = false;
 
-	if (zynqmp_pmufw_version() <= PMUFW_V1_0) {
+	if (zynqmp_firmware_version() <= PMUFW_V1_0) {
 		puts("WARN: PMUFW v1.0 or less is detected\n");
 		puts("WARN: Not all bitstream formats are supported\n");
 		puts("WARN: Please upgrade PMUFW\n");
-- 
2.17.1