[U-Boot] [PATCH] net: phy: Increase link up delay in genphy_update_link()

[Stefan Roese]

I've noticed that in most cases when genphy_update_link() is called, the
ethernet driver (mt7628-eth in this case) fails with the first ethernet
packets. Resulting in a timeout of the first tftp command. Increasing
the delay in the link check look from 1 to 50 ms and moving it below the
BMSR register read fixes this issue, resulting in a stable ethernet
traffic, even after initial link autonogotiation.

Signed-off-by: Stefan Roese <sr at denx.de>
Cc: Weijie Gao <weijie.gao at mediatek.com>
Cc: Joe Hershberger <joe.hershberger at ni.com>
---
 drivers/net/phy/phy.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index ae37dd6c1e..18e5ebd29c 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -256,11 +256,11 @@ int genphy_update_link(struct phy_device *phydev)
 				return -EINTR;
 			}
 
-			if ((i++ % 500) == 0)
+			if ((i++ % 10) == 0)
 				printf(".");
 
-			udelay(1000);	/* 1 ms */
 			mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMSR);
+			mdelay(50);	/* 50 ms */
 		}
 		printf(" done\n");
 		phydev->link = 1;
-- 
2.23.0