[U-Boot] [PATCH v2 07/16] dfu: add backend for MTD device
Patrick Delaunay
patrick.delaunay at st.com
Mon Sep 30 13:38:23 UTC 2019
Add DFU backend for MTD device: allow to read
and write on all MTD device (NAND, SPI-NOR,
SPI-NAND,...)
For example :
> set dfu_alt_info "nand_raw raw 0x0 0x100000"
> dfu 0 mtd nand0
This MTD backend provides the same level than dfu nand
backend for NAND and dfu sf backend for SPI-NOR;
So it can replace booth of them but it also
add support of spi-nand.
> set dfu_alt_info "nand_raw raw 0x0 0x100000"
> dfu 0 mtd spi-nand0
The backend code is based on the "mtd" command
introduced by commit 5db66b3aee6f ("cmd: mtd:
add 'mtd' command")
Signed-off-by: Patrick Delaunay <patrick.delaunay at st.com>
---
Changes in v2:
- Update commit message
- Update dfu documentation for MTD
doc/README.dfu | 10 ++
drivers/dfu/Kconfig | 6 ++
drivers/dfu/Makefile | 1 +
drivers/dfu/dfu.c | 5 +-
drivers/dfu/dfu_mtd.c | 230 ++++++++++++++++++++++++++++++++++++++++++
include/dfu.h | 21 ++++
6 files changed, 272 insertions(+), 1 deletion(-)
create mode 100644 drivers/dfu/dfu_mtd.c
diff --git a/doc/README.dfu b/doc/README.dfu
index 0adff1603f..423d4fa28a 100644
--- a/doc/README.dfu
+++ b/doc/README.dfu
@@ -21,6 +21,7 @@ Overview:
- NAND
- RAM
- SF (serial flash)
+ - MTD (all MTD device: NAND, SPI-NOR, SPI-NAND,...)
These DFU backends are also used by
- the dfutftp (see README.dfutftp)
@@ -30,6 +31,7 @@ Configuration Options:
CONFIG_DFU
CONFIG_DFU_OVER_USB
CONFIG_DFU_MMC
+ CONFIG_DFU_MTD
CONFIG_DFU_NAND
CONFIG_DFU_RAM
CONFIG_DFU_SF
@@ -103,6 +105,13 @@ Commands:
with <partid> is the MTD partition index
+ "mtd" (all MTD device: NAND, SPI-NOR, SPI-NAND,...)
+ cmd: dfu 0 mtd <dev>
+ with <dev> the mtd identifier as defined in mtd command
+ (nand0, nor0, spi-nand0,...)
+ each element in "dfu_alt_info" =
+ <name> raw <offset> <size> raw access to mtd device
+
<interface> and <dev> are absent:
the dfu command to use multiple devices
cmd: dfu 0 list
@@ -113,6 +122,7 @@ Commands:
nand <dev>=<alt1>;....;<altN>
ram <dev>=<alt1>;....;<altN>
sf <dev>=<alt1>;....;<altN>
+ mtd <dev>=<alt1>;....;<altN>
Host tools:
diff --git a/drivers/dfu/Kconfig b/drivers/dfu/Kconfig
index 4692736c9d..ee664a331b 100644
--- a/drivers/dfu/Kconfig
+++ b/drivers/dfu/Kconfig
@@ -46,5 +46,11 @@ config DFU_SF
This option enables using DFU to read and write to SPI flash based
storage.
+config DFU_MTD
+ bool "MTD back end for DFU"
+ depends on MTD
+ help
+ This option enables using DFU to read and write to on any MTD device.
+
endif
endmenu
diff --git a/drivers/dfu/Makefile b/drivers/dfu/Makefile
index 4164f342ac..ebb119f398 100644
--- a/drivers/dfu/Makefile
+++ b/drivers/dfu/Makefile
@@ -5,6 +5,7 @@
obj-$(CONFIG_$(SPL_)DFU) += dfu.o
obj-$(CONFIG_$(SPL_)DFU_MMC) += dfu_mmc.o
+obj-$(CONFIG_$(SPL_)DFU_MTD) += dfu_mtd.o
obj-$(CONFIG_$(SPL_)DFU_NAND) += dfu_nand.o
obj-$(CONFIG_$(SPL_)DFU_RAM) += dfu_ram.o
obj-$(CONFIG_$(SPL_)DFU_SF) += dfu_sf.o
diff --git a/drivers/dfu/dfu.c b/drivers/dfu/dfu.c
index 50919fcae9..4f4a07b790 100644
--- a/drivers/dfu/dfu.c
+++ b/drivers/dfu/dfu.c
@@ -462,6 +462,9 @@ static int dfu_fill_entity(struct dfu_entity *dfu, char *s, int alt,
if (strcmp(interface, "mmc") == 0) {
if (dfu_fill_entity_mmc(dfu, devstr, s))
return -1;
+ } else if (strcmp(interface, "mtd") == 0) {
+ if (dfu_fill_entity_mtd(dfu, devstr, s))
+ return -1;
} else if (strcmp(interface, "nand") == 0) {
if (dfu_fill_entity_nand(dfu, devstr, s))
return -1;
@@ -566,7 +569,7 @@ int dfu_config_entities(char *env, char *interface, char *devstr)
const char *dfu_get_dev_type(enum dfu_device_type t)
{
const char *const dev_t[] = {NULL, "eMMC", "OneNAND", "NAND", "RAM",
- "SF"};
+ "SF", "MTD"};
return dev_t[t];
}
diff --git a/drivers/dfu/dfu_mtd.c b/drivers/dfu/dfu_mtd.c
new file mode 100644
index 0000000000..1168a6e278
--- /dev/null
+++ b/drivers/dfu/dfu_mtd.c
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dfu_mtd.c -- DFU for MTD device.
+ *
+ * Copyright (C) 2019,STMicroelectronics - All Rights Reserved
+ *
+ * Based on dfu_nand.c
+ */
+
+#include <common.h>
+#include <dfu.h>
+#include <mtd.h>
+
+static bool mtd_is_aligned_with_block_size(struct mtd_info *mtd, u64 size)
+{
+ return !do_div(size, mtd->erasesize);
+}
+
+static int mtd_block_op(enum dfu_op op, struct dfu_entity *dfu,
+ u64 offset, void *buf, long *len)
+{
+ u64 off, lim, remaining;
+ struct mtd_info *mtd = dfu->data.mtd.info;
+ struct mtd_oob_ops io_op = {};
+ int ret = 0;
+ bool has_pages = mtd->type == MTD_NANDFLASH ||
+ mtd->type == MTD_MLCNANDFLASH;
+
+ /* if buf == NULL return total size of the area */
+ if (!buf) {
+ *len = dfu->data.mtd.size;
+ return 0;
+ }
+
+ off = dfu->data.mtd.start + offset + dfu->bad_skip;
+ lim = dfu->data.mtd.start + dfu->data.mtd.size;
+
+ if (off >= lim) {
+ printf("Limit reached 0x%llx\n", lim);
+ *len = 0;
+ return op == DFU_OP_READ ? 0 : -EIO;
+ }
+ /* limit request with the available size */
+ if (off + *len >= lim)
+ *len = lim - off;
+
+ if (!mtd_is_aligned_with_block_size(mtd, off)) {
+ printf("Offset not aligned with a block (0x%x)\n",
+ mtd->erasesize);
+ return 0;
+ }
+
+ /* first erase */
+ if (op == DFU_OP_WRITE) {
+ struct erase_info erase_op = {};
+
+ erase_op.mtd = mtd;
+ erase_op.addr = off;
+ erase_op.len = round_up(*len, mtd->erasesize);
+ erase_op.scrub = 0;
+
+ while (erase_op.len) {
+ if (erase_op.addr + erase_op.len > lim) {
+ printf("Limit reached 0x%llx while erasing at offset 0x%llx\n",
+ lim, off);
+ return -EIO;
+ }
+
+ ret = mtd_erase(mtd, &erase_op);
+ /* Abort if its not a bad block error */
+ if (ret != -EIO)
+ break;
+
+ printf("Skipping bad block at 0x%08llx\n",
+ erase_op.fail_addr);
+
+ /* Continue erase behind bad block */
+ erase_op.len -= erase_op.fail_addr - erase_op.addr;
+ erase_op.addr = erase_op.fail_addr + mtd->erasesize;
+ }
+ if (ret && ret != -EIO) {
+ printf("Failure while erasing at offset 0x%llx\n",
+ erase_op.fail_addr);
+ return 0;
+ }
+ }
+
+ io_op.mode = MTD_OPS_AUTO_OOB;
+ io_op.len = *len;
+ if (has_pages && io_op.len > mtd->writesize)
+ io_op.len = mtd->writesize;
+ io_op.ooblen = 0;
+ io_op.datbuf = buf;
+ io_op.oobbuf = NULL;
+
+ /* Loop over to do the actual read/write */
+ remaining = *len;
+ while (remaining) {
+ if (off + remaining > lim) {
+ printf("Limit reached 0x%llx while %s at offset 0x%llx\n",
+ lim, op == DFU_OP_READ ? "reading" : "writing",
+ off);
+ if (op == DFU_OP_READ) {
+ *len -= remaining;
+ return 0;
+ } else {
+ return -EIO;
+ }
+ }
+
+ /* Skip the block if it is bad */
+ if (mtd_is_aligned_with_block_size(mtd, off) &&
+ mtd_block_isbad(mtd, off)) {
+ off += mtd->erasesize;
+ dfu->bad_skip += mtd->erasesize;
+ continue;
+ }
+
+ if (op == DFU_OP_READ)
+ ret = mtd_read_oob(mtd, off, &io_op);
+ else
+ ret = mtd_write_oob(mtd, off, &io_op);
+
+ if (ret) {
+ printf("Failure while %s at offset 0x%llx\n",
+ op == DFU_OP_READ ? "reading" : "writing", off);
+ return -EIO;
+ }
+
+ off += io_op.retlen;
+ remaining -= io_op.retlen;
+ io_op.datbuf += io_op.retlen;
+ io_op.len = remaining;
+ if (has_pages && io_op.len > mtd->writesize)
+ io_op.len = mtd->writesize;
+ }
+
+ return ret;
+}
+
+static int dfu_get_medium_size_mtd(struct dfu_entity *dfu, u64 *size)
+{
+ *size = dfu->data.mtd.info->size;
+
+ return 0;
+}
+
+static int dfu_read_medium_mtd(struct dfu_entity *dfu, u64 offset, void *buf,
+ long *len)
+{
+ int ret = -1;
+
+ switch (dfu->layout) {
+ case DFU_RAW_ADDR:
+ ret = mtd_block_op(DFU_OP_READ, dfu, offset, buf, len);
+ break;
+ default:
+ printf("%s: Layout (%s) not (yet) supported!\n", __func__,
+ dfu_get_layout(dfu->layout));
+ }
+
+ return ret;
+}
+
+static int dfu_write_medium_mtd(struct dfu_entity *dfu,
+ u64 offset, void *buf, long *len)
+{
+ int ret = -1;
+
+ switch (dfu->layout) {
+ case DFU_RAW_ADDR:
+ ret = mtd_block_op(DFU_OP_WRITE, dfu, offset, buf, len);
+ break;
+ default:
+ printf("%s: Layout (%s) not (yet) supported!\n", __func__,
+ dfu_get_layout(dfu->layout));
+ }
+
+ return ret;
+}
+
+static int dfu_flush_medium_mtd(struct dfu_entity *dfu)
+{
+ return 0;
+}
+
+static unsigned int dfu_polltimeout_mtd(struct dfu_entity *dfu)
+{
+ return DFU_DEFAULT_POLL_TIMEOUT;
+}
+
+int dfu_fill_entity_mtd(struct dfu_entity *dfu, char *devstr, char *s)
+{
+ char *st;
+ struct mtd_info *mtd;
+ bool has_pages;
+
+ mtd = get_mtd_device_nm(devstr);
+ if (IS_ERR_OR_NULL(mtd))
+ return -ENODEV;
+ put_mtd_device(mtd);
+
+ dfu->dev_type = DFU_DEV_MTD;
+ dfu->data.mtd.info = mtd;
+
+ has_pages = mtd->type == MTD_NANDFLASH || mtd->type == MTD_MLCNANDFLASH;
+ dfu->max_buf_size = has_pages ? mtd->erasesize : 0;
+
+ st = strsep(&s, " ");
+ if (!strcmp(st, "raw")) {
+ dfu->layout = DFU_RAW_ADDR;
+ dfu->data.mtd.start = simple_strtoul(s, &s, 16);
+ s++;
+ dfu->data.mtd.size = simple_strtoul(s, &s, 16);
+ } else {
+ printf("%s: (%s) not supported!\n", __func__, st);
+ return -1;
+ }
+
+ dfu->get_medium_size = dfu_get_medium_size_mtd;
+ dfu->read_medium = dfu_read_medium_mtd;
+ dfu->write_medium = dfu_write_medium_mtd;
+ dfu->flush_medium = dfu_flush_medium_mtd;
+ dfu->poll_timeout = dfu_polltimeout_mtd;
+
+ /* initial state */
+ dfu->inited = 0;
+
+ return 0;
+}
diff --git a/include/dfu.h b/include/dfu.h
index 7d60ffc228..924952f805 100644
--- a/include/dfu.h
+++ b/include/dfu.h
@@ -22,6 +22,7 @@ enum dfu_device_type {
DFU_DEV_NAND,
DFU_DEV_RAM,
DFU_DEV_SF,
+ DFU_DEV_MTD,
};
enum dfu_layout {
@@ -55,6 +56,14 @@ struct mmc_internal_data {
unsigned int part;
};
+struct mtd_internal_data {
+ struct mtd_info *info;
+
+ /* RAW programming */
+ u64 start;
+ u64 size;
+};
+
struct nand_internal_data {
/* RAW programming */
u64 start;
@@ -105,6 +114,7 @@ struct dfu_entity {
union {
struct mmc_internal_data mmc;
+ struct mtd_internal_data mtd;
struct nand_internal_data nand;
struct ram_internal_data ram;
struct sf_internal_data sf;
@@ -249,6 +259,17 @@ static inline int dfu_fill_entity_sf(struct dfu_entity *dfu, char *devstr,
}
#endif
+#if CONFIG_IS_ENABLED(DFU_MTD)
+int dfu_fill_entity_mtd(struct dfu_entity *dfu, char *devstr, char *s);
+#else
+static inline int dfu_fill_entity_mtd(struct dfu_entity *dfu, char *devstr,
+ char *s)
+{
+ puts("MTD support not available!\n");
+ return -1;
+}
+#endif
+
/**
* dfu_tftp_write - Write TFTP data to DFU medium
*
--
2.17.1
More information about the U-Boot
mailing list