[PATCH 07/11] Nokia RX-51: Remember setup_console_atag option

[Pali Rohár]

When variable setup_console_atag is unset then read default value from OMAP
atags which passed NOLO bootloader to U-Boot.

This would allow to boot Maemo Linux kernel from U-Boot with serial console
settings configured in NOLO bootloader (which loads U-Boot).

So serial console needs to be enabled only at one place, globally in NOLO.

Signed-off-by: Pali Rohár <pali at kernel.org>
---
 board/nokia/rx51/rx51.c | 23 +++++++++++++++++++----
 1 file changed, 19 insertions(+), 4 deletions(-)

diff --git a/board/nokia/rx51/rx51.c b/board/nokia/rx51/rx51.c
index c8ef26f940..a282fe68a6 100644
--- a/board/nokia/rx51/rx51.c
+++ b/board/nokia/rx51/rx51.c
@@ -87,6 +87,7 @@ static char *boot_reason_ptr;
 static char *hw_build_ptr;
 static char *nolo_version_ptr;
 static char *boot_mode_ptr;
+static int serial_was_console_enabled;
 
 /*
  * Routine: init_omap_tags
@@ -143,6 +144,13 @@ static void reuse_omap_atags(struct tag_omap *t)
 				strcpy(boot_mode_ptr, version);
 			}
 			break;
+		case OMAP_TAG_UART:
+			if (!t->u.uart.enabled_uarts)
+				serial_was_console_enabled = 1;
+			break;
+		case OMAP_TAG_SERIAL_CONSOLE:
+			serial_was_console_enabled = 1;
+			break;
 		default:
 			break;
 		}
@@ -233,10 +241,17 @@ void setup_board_tags(struct tag **in_params)
 		return;
 
 	str = env_get("setup_console_atag");
-	if (str && str[0] == '1')
-		setup_console_atag = 1;
-	else
-		setup_console_atag = 0;
+	if (str && str[0]) {
+		if (str[0] == '1')
+			setup_console_atag = 1;
+		else
+			setup_console_atag = 0;
+	} else {
+		if (serial_was_console_enabled)
+			setup_console_atag = 1;
+		else
+			setup_console_atag = 0;
+	}
 
 	setup_boot_reason_atag = env_get("setup_boot_reason_atag");
 	setup_boot_mode_atag = env_get("setup_boot_mode_atag");
-- 
2.20.1