[PATCH v2 1/1] driver: watchdog: get platform clock from dt file

[Rayagonda Kokatanur]

From: Bharat Kumar Reddy Gooty <bharat.gooty at broadcom.com>

Get the watchdog platform clock from the DTS file
and use the same for calculating ticks in msec.

Signed-off-by: Bharat Kumar Reddy Gooty <bharat.gooty at broadcom.com>
Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur at broadcom.com>
---
Changes from v1:
 -Address review comments from Stefan Roese,
  Remove default timeout reading in probe() as it is read in include/wdt.h.
  Add paranthesis on multi-line statements.

 drivers/watchdog/sp805_wdt.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/watchdog/sp805_wdt.c b/drivers/watchdog/sp805_wdt.c
index ca3ccbe76c..b9e4aee7a5 100644
--- a/drivers/watchdog/sp805_wdt.c
+++ b/drivers/watchdog/sp805_wdt.c
@@ -34,6 +34,7 @@ DECLARE_GLOBAL_DATA_PTR;
 
 struct sp805_wdt_priv {
 	void __iomem *reg;
+	u32 clk_mhz;
 };
 
 static int sp805_wdt_reset(struct udevice *dev)
@@ -63,8 +64,13 @@ static int sp805_wdt_start(struct udevice *dev, u64 timeout, ulong flags)
 	 * set 120s, the gd->bus_clk is less than 1145MHz, the load_value will
 	 * not overflow.
 	 */
-	load_value = (gd->bus_clk) /
-		(2 * 1000 * SYS_FSL_WDT_CLK_DIV) * load_time;
+	if (gd->bus_clk) {
+		load_value = (gd->bus_clk) /
+			(2 * 1000 * SYS_FSL_WDT_CLK_DIV) * load_time;
+	} else {
+		/* platform provide clk */
+		load_value = (timeout / 2) * (priv->clk_mhz / 1000);
+	}
 
 	writel(UNLOCK, priv->reg + WDTLOCK);
 	writel(load_value, priv->reg + WDTLOAD);
@@ -110,6 +116,9 @@ static int sp805_wdt_ofdata_to_platdata(struct udevice *dev)
 	if (IS_ERR(priv->reg))
 		return PTR_ERR(priv->reg);
 
+	if (dev_read_u32(dev, "clk-mhz", &priv->clk_mhz))
+		return -ENODATA;
+
 	return 0;
 }
 
-- 
2.17.1