[PATCH] ARM: dts: stm32: Define FMC2 base address
Patrick DELAUNAY
patrick.delaunay at st.com
Wed Apr 1 15:45:02 CEST 2020
Hi Marek,
> From: Marek Vasut <marex at denx.de>
> Sent: jeudi 26 mars 2020 16:57
>
> Define FMC2 base address, for use in board files, until there is an actual FMC2
> bus driver.
>
> Signed-off-by: Marek Vasut <marex at denx.de>
> Cc: Patrick Delaunay <patrick.delaunay at st.com>
> Cc: Patrice Chotard <patrice.chotard at st.com>
> ---
> arch/arm/mach-stm32mp/include/mach/stm32.h | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/mach-stm32mp/include/mach/stm32.h b/arch/arm/mach-
> stm32mp/include/mach/stm32.h
> index f0636005e5..62d95d7f88 100644
> --- a/arch/arm/mach-stm32mp/include/mach/stm32.h
> +++ b/arch/arm/mach-stm32mp/include/mach/stm32.h
> @@ -13,6 +13,7 @@
> #define STM32_RCC_BASE 0x50000000
> #define STM32_PWR_BASE 0x50001000
> #define STM32_DBGMCU_BASE 0x50081000
> +#define STM32_FMC2_BASE 0x58002000
For me, the address should be defined in this file only for the few addresses used
before device tree avaibility: I want to avoid to have all the device defined here.
But normally it is not the case for FMC2, even if I understand the current need, without FMC2 bus driver....
I will take this patch only it is not possible to get FMC2 address from device tree.
> #define STM32_TZC_BASE 0x5C006000
> #define STM32_ETZPC_BASE 0x5C007000
> #define STM32_STGEN_BASE 0x5C008000
> --
> 2.25.1
Regards
Patrick
More information about the U-Boot
mailing list