[PATCH v3] serial: ns16550: Revert "Move PCI access from ofdata_to_platdata() to probe()"

Andy Shevchenko andy.shevchenko at gmail.com
Fri Apr 3 10:46:55 CEST 2020


On Fri, Apr 3, 2020 at 11:40 AM Andy Shevchenko
<andriy.shevchenko at linux.intel.com> wrote:
>
> The commit 720f9e1fdb0c ("Move PCI access from ofdata_to_platdata() to
> probe()") while doing formally a right thing, actually brings a regression
> to the drivers that would like to pre-initialize hardware before calling
> ns16550_serial_probe(). In particular, the code, which gets moved out,
> is responsible for getting the address of the hardware.
>
> The commit breaks serial console on the Intel Edison, for example.
>
> Since we are very close to the release, the quick fix is to revert the
> culprit commit 720f9e1fdb0c92d3fd16e1bfc25bcbd35612675c.
>
> Note, it doesn't affect SoCFPGA case.
>

As mentioned in another email, I'll glad to test a better solution if
it pops up in time.

> Cc: Wolfgang Wallner <wolfgang.wallner at br-automation.com>
> Signed-off-by: Andy Shevchenko <andriy.shevchenko at linux.intel.com>
> ---
> v3: drop wrong patch, better explanation in the commit message
>  drivers/serial/ns16550.c | 40 ++++++++++++----------------------------
>  1 file changed, 12 insertions(+), 28 deletions(-)
>
> diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
> index c1b303ffcb..1fcbc35015 100644
> --- a/drivers/serial/ns16550.c
> +++ b/drivers/serial/ns16550.c
> @@ -479,40 +479,12 @@ static int ns16550_serial_getinfo(struct udevice *dev,
>         return 0;
>  }
>
> -#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
> -static int ns1655_serial_set_base_addr(struct udevice *dev)
> -{
> -       fdt_addr_t addr;
> -       struct ns16550_platdata *plat;
> -
> -       plat = dev_get_platdata(dev);
> -
> -       addr = dev_read_addr_pci(dev);
> -       if (addr == FDT_ADDR_T_NONE)
> -               return -EINVAL;
> -
> -#ifdef CONFIG_SYS_NS16550_PORT_MAPPED
> -       plat->base = addr;
> -#else
> -       plat->base = (unsigned long)map_physmem(addr, 0, MAP_NOCACHE);
> -#endif
> -
> -       return 0;
> -}
> -#endif
> -
>  int ns16550_serial_probe(struct udevice *dev)
>  {
>         struct NS16550 *const com_port = dev_get_priv(dev);
>         struct reset_ctl_bulk reset_bulk;
>         int ret;
>
> -#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
> -       ret = ns1655_serial_set_base_addr(dev);
> -       if (ret)
> -               return ret;
> -#endif
> -
>         ret = reset_get_bulk(dev, &reset_bulk);
>         if (!ret)
>                 reset_deassert_bulk(&reset_bulk);
> @@ -535,9 +507,21 @@ int ns16550_serial_ofdata_to_platdata(struct udevice *dev)
>  {
>         struct ns16550_platdata *plat = dev->platdata;
>         const u32 port_type = dev_get_driver_data(dev);
> +       fdt_addr_t addr;
>         struct clk clk;
>         int err;
>
> +       /* try Processor Local Bus device first */
> +       addr = dev_read_addr_pci(dev);
> +       if (addr == FDT_ADDR_T_NONE)
> +               return -EINVAL;
> +
> +#ifdef CONFIG_SYS_NS16550_PORT_MAPPED
> +       plat->base = addr;
> +#else
> +       plat->base = (unsigned long)map_physmem(addr, 0, MAP_NOCACHE);
> +#endif
> +
>         plat->reg_offset = dev_read_u32_default(dev, "reg-offset", 0);
>         plat->reg_shift = dev_read_u32_default(dev, "reg-shift", 0);
>         plat->reg_width = dev_read_u32_default(dev, "reg-io-width", 1);
> --
> 2.25.1
>


-- 
With Best Regards,
Andy Shevchenko


More information about the U-Boot mailing list