[PATCH 17/26 v6] spl: Extract legacy image handling into separate file
Stefan Roese
sr at denx.de
Wed Apr 8 10:09:33 CEST 2020
This patch moves the legacy image handling into a separate file, which
will be extended with other legacy image features later.
No function change intended.
Signed-off-by: Stefan Roese <sr at denx.de>
Cc: Weijie Gao <weijie.gao at mediatek.com>
Cc: Simon Goldschmidt <simon.k.r.goldschmidt at gmail.com>
---
Changes in v6:
- New patch
common/spl/Makefile | 1 +
common/spl/spl.c | 56 +++++++++--------------------------------
common/spl/spl_legacy.c | 54 +++++++++++++++++++++++++++++++++++++++
3 files changed, 67 insertions(+), 44 deletions(-)
create mode 100644 common/spl/spl_legacy.c
diff --git a/common/spl/Makefile b/common/spl/Makefile
index eaa57f5ce5..c576a78126 100644
--- a/common/spl/Makefile
+++ b/common/spl/Makefile
@@ -10,6 +10,7 @@ ifdef CONFIG_SPL_BUILD
obj-$(CONFIG_$(SPL_TPL_)FRAMEWORK) += spl.o
obj-$(CONFIG_$(SPL_TPL_)BOOTROM_SUPPORT) += spl_bootrom.o
obj-$(CONFIG_$(SPL_TPL_)LOAD_FIT) += spl_fit.o
+obj-$(CONFIG_$(SPL_TPL_)LEGACY_IMAGE_SUPPORT) += spl_legacy.o
obj-$(CONFIG_$(SPL_TPL_)NOR_SUPPORT) += spl_nor.o
obj-$(CONFIG_$(SPL_TPL_)XIP_SUPPORT) += spl_xip.o
obj-$(CONFIG_$(SPL_TPL_)YMODEM_SUPPORT) += spl_ymodem.o
diff --git a/common/spl/spl.c b/common/spl/spl.c
index 932e6ab98a..b0f0e1557b 100644
--- a/common/spl/spl.c
+++ b/common/spl/spl.c
@@ -254,6 +254,14 @@ static int spl_load_fit_image(struct spl_image_info *spl_image,
}
#endif
+__weak int spl_parse_legacy_header(struct spl_image_info *spl_image,
+ const struct image_header *header)
+{
+ /* LEGACY image not supported */
+ debug("Legacy boot image support not enabled, proceeding to other boot methods\n");
+ return -EINVAL;
+}
+
int spl_parse_image_header(struct spl_image_info *spl_image,
const struct image_header *header)
{
@@ -264,51 +272,11 @@ int spl_parse_image_header(struct spl_image_info *spl_image,
return ret;
#endif
if (image_get_magic(header) == IH_MAGIC) {
-#ifdef CONFIG_SPL_LEGACY_IMAGE_SUPPORT
- u32 header_size = sizeof(struct image_header);
-
-#ifdef CONFIG_SPL_LEGACY_IMAGE_CRC_CHECK
- /* check uImage header CRC */
- if (!image_check_hcrc(header)) {
- puts("SPL: Image header CRC check failed!\n");
- return -EINVAL;
- }
-#endif
-
- if (spl_image->flags & SPL_COPY_PAYLOAD_ONLY) {
- /*
- * On some system (e.g. powerpc), the load-address and
- * entry-point is located at address 0. We can't load
- * to 0-0x40. So skip header in this case.
- */
- spl_image->load_addr = image_get_load(header);
- spl_image->entry_point = image_get_ep(header);
- spl_image->size = image_get_data_size(header);
- } else {
- spl_image->entry_point = image_get_ep(header);
- /* Load including the header */
- spl_image->load_addr = image_get_load(header) -
- header_size;
- spl_image->size = image_get_data_size(header) +
- header_size;
- }
-#ifdef CONFIG_SPL_LEGACY_IMAGE_CRC_CHECK
- /* store uImage data length and CRC to check later */
- spl_image->dcrc_data = image_get_load(header);
- spl_image->dcrc_length = image_get_data_size(header);
- spl_image->dcrc = image_get_dcrc(header);
-#endif
+ int ret;
- spl_image->os = image_get_os(header);
- spl_image->name = image_get_name(header);
- debug(SPL_TPL_PROMPT
- "payload image: %32s load addr: 0x%lx size: %d\n",
- spl_image->name, spl_image->load_addr, spl_image->size);
-#else
- /* LEGACY image not supported */
- debug("Legacy boot image support not enabled, proceeding to other boot methods\n");
- return -EINVAL;
-#endif
+ ret = spl_parse_legacy_header(spl_image, header);
+ if (ret)
+ return ret;
} else {
#ifdef CONFIG_SPL_PANIC_ON_RAW_IMAGE
/*
diff --git a/common/spl/spl_legacy.c b/common/spl/spl_legacy.c
new file mode 100644
index 0000000000..33f3587e3b
--- /dev/null
+++ b/common/spl/spl_legacy.c
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020 Stefan Roese <sr at denx.de>
+ */
+
+#include <common.h>
+#include <spl.h>
+
+int spl_parse_legacy_header(struct spl_image_info *spl_image,
+ const struct image_header *header)
+{
+ u32 header_size = sizeof(struct image_header);
+
+#ifdef CONFIG_SPL_LEGACY_IMAGE_CRC_CHECK
+ /* check uImage header CRC */
+ if (!image_check_hcrc(header)) {
+ puts("SPL: Image header CRC check failed!\n");
+ return -EINVAL;
+ }
+#endif
+
+ if (spl_image->flags & SPL_COPY_PAYLOAD_ONLY) {
+ /*
+ * On some system (e.g. powerpc), the load-address and
+ * entry-point is located at address 0. We can't load
+ * to 0-0x40. So skip header in this case.
+ */
+ spl_image->load_addr = image_get_load(header);
+ spl_image->entry_point = image_get_ep(header);
+ spl_image->size = image_get_data_size(header);
+ } else {
+ spl_image->entry_point = image_get_ep(header);
+ /* Load including the header */
+ spl_image->load_addr = image_get_load(header) -
+ header_size;
+ spl_image->size = image_get_data_size(header) +
+ header_size;
+ }
+
+#ifdef CONFIG_SPL_LEGACY_IMAGE_CRC_CHECK
+ /* store uImage data length and CRC to check later */
+ spl_image->dcrc_data = image_get_load(header);
+ spl_image->dcrc_length = image_get_data_size(header);
+ spl_image->dcrc = image_get_dcrc(header);
+#endif
+
+ spl_image->os = image_get_os(header);
+ spl_image->name = image_get_name(header);
+ debug(SPL_TPL_PROMPT
+ "payload image: %32s load addr: 0x%lx size: %d\n",
+ spl_image->name, spl_image->load_addr, spl_image->size);
+
+ return 0;
+}
--
2.26.0
More information about the U-Boot
mailing list