[PATCH v8 01/21] clk: Always use the supplied struct clk
Sean Anderson
seanga2 at gmail.com
Fri Apr 10 14:27:54 CEST 2020
CCF clocks should always use the struct clock passed to their methods for
extracting the driver-specific clock information struct. Previously, many
functions would use the clk->dev->priv if the device was bound. This could
cause problems with composite clocks. The individual clocks in a composite
clock did not have the ->dev field filled in. This was fine, because the
device-specific clock information would be used. However, since there was
no ->dev, there was no way to get the parent clock. This caused the
recalc_rate method of the CCF divider clock to fail. One option would be to
use the clk->priv field to get the composite clock and from there get the
appropriate parent device. However, this would tie the implementation to
the composite clock. In general, different devices should not rely on the
contents of ->priv from another device.
The simple solution to this problem is to just always use the supplied
struct clock. The composite clock now fills in the ->dev pointer of its
child clocks. This allows child clocks to make calls like clk_get_parent()
without issue.
imx avoided the above problem by using a custom get_rate function with
composite clocks.
Signed-off-by: Sean Anderson <seanga2 at gmail.com>
Acked-by: Lukasz Majewski <lukma at denx.de>
---
Changes in v4:
- Lint
Changes in v3:
- Documented new assumptions in the CCF
- Wrapped docs to 80 columns
doc/imx/clk/ccf.txt | 63 +++++++++++++++++-----------------
drivers/clk/clk-composite.c | 7 ++++
drivers/clk/clk-divider.c | 6 ++--
drivers/clk/clk-fixed-factor.c | 3 +-
drivers/clk/clk-gate.c | 6 ++--
drivers/clk/clk-mux.c | 12 +++----
drivers/clk/imx/clk-gate2.c | 4 +--
7 files changed, 50 insertions(+), 51 deletions(-)
diff --git a/doc/imx/clk/ccf.txt b/doc/imx/clk/ccf.txt
index 36b60dc438..e40ac360e8 100644
--- a/doc/imx/clk/ccf.txt
+++ b/doc/imx/clk/ccf.txt
@@ -1,42 +1,37 @@
Introduction:
=============
-This documentation entry describes the Common Clock Framework [CCF]
-port from Linux kernel (v5.1.12) to U-Boot.
+This documentation entry describes the Common Clock Framework [CCF] port from
+Linux kernel (v5.1.12) to U-Boot.
-This code is supposed to bring CCF to IMX based devices (imx6q, imx7
-imx8). Moreover, it also provides some common clock code, which would
-allow easy porting of CCF Linux code to other platforms.
+This code is supposed to bring CCF to IMX based devices (imx6q, imx7 imx8).
+Moreover, it also provides some common clock code, which would allow easy
+porting of CCF Linux code to other platforms.
Design decisions:
=================
-* U-Boot's driver model [DM] for clk differs from Linux CCF. The most
- notably difference is the lack of support for hierarchical clocks and
- "clock as a manager driver" (single clock DTS node acts as a starting
- point for all other clocks).
+* U-Boot's driver model [DM] for clk differs from Linux CCF. The most notably
+ difference is the lack of support for hierarchical clocks and "clock as a
+ manager driver" (single clock DTS node acts as a starting point for all other
+ clocks).
-* The clk_get_rate() caches the previously read data if CLK_GET_RATE_NOCACHE
- is not set (no need for recursive access).
+* The clk_get_rate() caches the previously read data if CLK_GET_RATE_NOCACHE is
+ not set (no need for recursive access).
-* On purpose the "manager" clk driver (clk-imx6q.c) is not using large
- table to store pointers to clocks - e.g. clk[IMX6QDL_CLK_USDHC2_SEL] = ....
- Instead we use udevice's linked list for the same class (UCLASS_CLK).
+* On purpose the "manager" clk driver (clk-imx6q.c) is not using large table to
+ store pointers to clocks - e.g. clk[IMX6QDL_CLK_USDHC2_SEL] = .... Instead we
+ use udevice's linked list for the same class (UCLASS_CLK).
Rationale:
----------
- When porting the code as is from Linux, one would need ~1KiB of RAM to
- store it. This is way too much if we do plan to use this driver in SPL.
+ When porting the code as is from Linux, one would need ~1KiB of RAM to store
+ it. This is way too much if we do plan to use this driver in SPL.
* The "central" structure of this patch series is struct udevice and its
uclass_priv field contains the struct clk pointer (to the originally created
one).
-* Up till now U-Boot's driver model (DM) CLK operates on udevice (main
- access to clock is by udevice ops)
- In the CCF the access to struct clk (embodying pointer to *dev) is
- possible via dev_get_clk_ptr() (it is a wrapper on dev_get_uclass_priv()).
-
* To keep things simple the struct udevice's uclass_priv pointer is used to
store back pointer to corresponding struct clk. However, it is possible to
modify clk-uclass.c file and add there struct uc_clk_priv, which would have
@@ -45,13 +40,17 @@ Design decisions:
setting .per_device_auto_alloc_size = sizeof(struct uc_clk_priv)) the
uclass_priv stores the pointer to struct clk.
+* Non-CCF clocks do not have a pointer to a clock in clk->dev->priv. In the case
+ of composite clocks, clk->dev->priv may not match clk. Drivers should always
+ use the struct clk which is passed to them, and not clk->dev->priv.
+
* It is advised to add common clock code (like already added rate and flags) to
the struct clk, which is a top level description of the clock.
* U-Boot's driver model already provides the facility to automatically allocate
- (via private_alloc_size) device private data (accessible via dev->priv).
- It may look appealing to use this feature to allocate private structures for
- CCF clk devices e.g. divider (struct clk_divider *divider) for IMX6Q clock.
+ (via private_alloc_size) device private data (accessible via dev->priv). It
+ may look appealing to use this feature to allocate private structures for CCF
+ clk devices e.g. divider (struct clk_divider *divider) for IMX6Q clock.
The above feature had not been used for following reasons:
- The original CCF Linux kernel driver is the "manager" for clocks - it
@@ -64,21 +63,23 @@ Design decisions:
* I've added the clk_get_parent(), which reads parent's dev->uclass_priv to
provide parent's struct clk pointer. This seems the easiest way to get
- child/parent relationship for struct clk in U-Boot's udevice based clocks.
+ child/parent relationship for struct clk in U-Boot's udevice based clocks. In
+ the future arbitrary parents may be supported by adding a get_parent function
+ to clk_ops.
* Linux's CCF 'struct clk_core' corresponds to U-Boot's udevice in 'struct clk'.
Clock IP block agnostic flags from 'struct clk_core' (e.g. NOCACHE) have been
- moved from this struct one level up to 'struct clk'.
+ moved from this struct one level up to 'struct clk'. Many flags are
+ unimplemented at the moment.
* For tests the new ./test/dm/clk_ccf.c and ./drivers/clk/clk_sandbox_ccf.c
files have been introduced. The latter setups the CCF clock structure for
- sandbox by reusing, if possible, generic clock primitives - like divier
- and mux. The former file provides code to tests this setup.
+ sandbox by reusing, if possible, generic clock primitives - like divier and
+ mux. The former file provides code to tests this setup.
For sandbox new CONFIG_SANDBOX_CLK_CCF Kconfig define has been introduced.
- All new primitives added for new architectures must have corresponding test
- in the two aforementioned files.
-
+ All new primitives added for new architectures must have corresponding test in
+ the two aforementioned files.
Testing (sandbox):
==================
diff --git a/drivers/clk/clk-composite.c b/drivers/clk/clk-composite.c
index 414185031e..2ff1d6b47f 100644
--- a/drivers/clk/clk-composite.c
+++ b/drivers/clk/clk-composite.c
@@ -147,6 +147,13 @@ struct clk *clk_register_composite(struct device *dev, const char *name,
goto err;
}
+ if (composite->mux)
+ composite->mux->dev = clk->dev;
+ if (composite->rate)
+ composite->rate->dev = clk->dev;
+ if (composite->gate)
+ composite->gate->dev = clk->dev;
+
return clk;
err:
diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c
index d79ae367b8..5fe1c3941f 100644
--- a/drivers/clk/clk-divider.c
+++ b/drivers/clk/clk-divider.c
@@ -72,8 +72,7 @@ unsigned long divider_recalc_rate(struct clk *hw, unsigned long parent_rate,
static ulong clk_divider_recalc_rate(struct clk *clk)
{
- struct clk_divider *divider = to_clk_divider(clk_dev_binded(clk) ?
- dev_get_clk_ptr(clk->dev) : clk);
+ struct clk_divider *divider = to_clk_divider(clk);
unsigned long parent_rate = clk_get_parent_rate(clk);
unsigned int val;
@@ -152,8 +151,7 @@ int divider_get_val(unsigned long rate, unsigned long parent_rate,
static ulong clk_divider_set_rate(struct clk *clk, unsigned long rate)
{
- struct clk_divider *divider = to_clk_divider(clk_dev_binded(clk) ?
- dev_get_clk_ptr(clk->dev) : clk);
+ struct clk_divider *divider = to_clk_divider(clk);
unsigned long parent_rate = clk_get_parent_rate(clk);
int value;
u32 val;
diff --git a/drivers/clk/clk-fixed-factor.c b/drivers/clk/clk-fixed-factor.c
index 2ceb6bb171..0eb24b87fc 100644
--- a/drivers/clk/clk-fixed-factor.c
+++ b/drivers/clk/clk-fixed-factor.c
@@ -20,8 +20,7 @@
static ulong clk_factor_recalc_rate(struct clk *clk)
{
- struct clk_fixed_factor *fix =
- to_clk_fixed_factor(dev_get_clk_ptr(clk->dev));
+ struct clk_fixed_factor *fix = to_clk_fixed_factor(clk);
unsigned long parent_rate = clk_get_parent_rate(clk);
unsigned long long int rate;
diff --git a/drivers/clk/clk-gate.c b/drivers/clk/clk-gate.c
index 6415c2f1b9..b5827dced0 100644
--- a/drivers/clk/clk-gate.c
+++ b/drivers/clk/clk-gate.c
@@ -45,8 +45,7 @@
*/
static void clk_gate_endisable(struct clk *clk, int enable)
{
- struct clk_gate *gate = to_clk_gate(clk_dev_binded(clk) ?
- dev_get_clk_ptr(clk->dev) : clk);
+ struct clk_gate *gate = to_clk_gate(clk);
int set = gate->flags & CLK_GATE_SET_TO_DISABLE ? 1 : 0;
u32 reg;
@@ -88,8 +87,7 @@ static int clk_gate_disable(struct clk *clk)
int clk_gate_is_enabled(struct clk *clk)
{
- struct clk_gate *gate = to_clk_gate(clk_dev_binded(clk) ?
- dev_get_clk_ptr(clk->dev) : clk);
+ struct clk_gate *gate = to_clk_gate(clk);
u32 reg;
#if CONFIG_IS_ENABLED(SANDBOX_CLK_CCF)
diff --git a/drivers/clk/clk-mux.c b/drivers/clk/clk-mux.c
index b9d2ae6778..0502217dc4 100644
--- a/drivers/clk/clk-mux.c
+++ b/drivers/clk/clk-mux.c
@@ -37,8 +37,7 @@
int clk_mux_val_to_index(struct clk *clk, u32 *table, unsigned int flags,
unsigned int val)
{
- struct clk_mux *mux = to_clk_mux(clk_dev_binded(clk) ?
- dev_get_clk_ptr(clk->dev) : clk);
+ struct clk_mux *mux = to_clk_mux(clk);
int num_parents = mux->num_parents;
if (table) {
@@ -81,8 +80,7 @@ unsigned int clk_mux_index_to_val(u32 *table, unsigned int flags, u8 index)
u8 clk_mux_get_parent(struct clk *clk)
{
- struct clk_mux *mux = to_clk_mux(clk_dev_binded(clk) ?
- dev_get_clk_ptr(clk->dev) : clk);
+ struct clk_mux *mux = to_clk_mux(clk);
u32 val;
#if CONFIG_IS_ENABLED(SANDBOX_CLK_CCF)
@@ -99,8 +97,7 @@ u8 clk_mux_get_parent(struct clk *clk)
static int clk_fetch_parent_index(struct clk *clk,
struct clk *parent)
{
- struct clk_mux *mux = to_clk_mux(clk_dev_binded(clk) ?
- dev_get_clk_ptr(clk->dev) : clk);
+ struct clk_mux *mux = to_clk_mux(clk);
int i;
@@ -117,8 +114,7 @@ static int clk_fetch_parent_index(struct clk *clk,
static int clk_mux_set_parent(struct clk *clk, struct clk *parent)
{
- struct clk_mux *mux = to_clk_mux(clk_dev_binded(clk) ?
- dev_get_clk_ptr(clk->dev) : clk);
+ struct clk_mux *mux = to_clk_mux(clk);
int index;
u32 val;
u32 reg;
diff --git a/drivers/clk/imx/clk-gate2.c b/drivers/clk/imx/clk-gate2.c
index b38890d5ba..40b2d4caab 100644
--- a/drivers/clk/imx/clk-gate2.c
+++ b/drivers/clk/imx/clk-gate2.c
@@ -39,7 +39,7 @@ struct clk_gate2 {
static int clk_gate2_enable(struct clk *clk)
{
- struct clk_gate2 *gate = to_clk_gate2(dev_get_clk_ptr(clk->dev));
+ struct clk_gate2 *gate = to_clk_gate2(clk);
u32 reg;
reg = readl(gate->reg);
@@ -52,7 +52,7 @@ static int clk_gate2_enable(struct clk *clk)
static int clk_gate2_disable(struct clk *clk)
{
- struct clk_gate2 *gate = to_clk_gate2(dev_get_clk_ptr(clk->dev));
+ struct clk_gate2 *gate = to_clk_gate2(clk);
u32 reg;
reg = readl(gate->reg);
--
2.25.1
More information about the U-Boot
mailing list