[PATCH] board: stm32mp1: correct CONFIG_IS_ENABLED usage for LED

Patrick Delaunay patrick.delaunay at st.com
Fri Apr 10 19:14:01 CEST 2020


Use the correct macro to test presence CONFIG_LED:
replace CONFIG_IS_ENABLED(CONFIG_LED) by CONFIG_IS_ENABLED(LED)

Issue see during review unrelated patch
"board: stm32mp1: update management of boot-led"
http://patchwork.ozlabs.org/patch/1264823/

Cc: Marek Vasut <marex at denx.de>
Cc: Patrice Chotard <patrice.chotard at st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay at st.com>
---

 board/dhelectronics/dh_stm32mp1/board.c | 2 +-
 board/st/stm32mp1/stm32mp1.c            | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/board/dhelectronics/dh_stm32mp1/board.c b/board/dhelectronics/dh_stm32mp1/board.c
index 7bcd713a86..3c14d8206d 100644
--- a/board/dhelectronics/dh_stm32mp1/board.c
+++ b/board/dhelectronics/dh_stm32mp1/board.c
@@ -398,7 +398,7 @@ int board_init(void)
 
 	sysconf_init();
 
-	if (CONFIG_IS_ENABLED(CONFIG_LED))
+	if (CONFIG_IS_ENABLED(LED))
 		led_default_state();
 
 	return 0;
diff --git a/board/st/stm32mp1/stm32mp1.c b/board/st/stm32mp1/stm32mp1.c
index 07f5344ec9..053c5e1f07 100644
--- a/board/st/stm32mp1/stm32mp1.c
+++ b/board/st/stm32mp1/stm32mp1.c
@@ -647,7 +647,7 @@ int board_init(void)
 
 	sysconf_init();
 
-	if (CONFIG_IS_ENABLED(CONFIG_LED))
+	if (CONFIG_IS_ENABLED(LED))
 		led_default_state();
 
 	return 0;
-- 
2.17.1



More information about the U-Boot mailing list