[PATCH 1/2] phy: mv88e61xx: add support for RGMII TX/RX delay

[Pawel Dembicki]

Clock delay in RGMII is required for some boards.
This patch introduce CONFIG_MV88E61XX_CPU_PORT_TX_DELAY and
CONFIG_MV88E61XX_CPU_PORT_RX_DELAY defines, which are setting
proper bits in PORT_REG_PHYS_CTRL register.

Cc: Chris Packham <judge.packham at gmail.com>
Cc: Joe Hershberger <joe.hershberger at ni.com>
Cc: Anatolij Gustschin <agust at denx.de>
Cc: Tim Harvey <tharvey at gateworks.com>
Signed-off-by: Pawel Dembicki <paweldembicki at gmail.com>
---
 drivers/net/phy/mv88e61xx.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/net/phy/mv88e61xx.c b/drivers/net/phy/mv88e61xx.c
index 5aff7ed397..889327639d 100644
--- a/drivers/net/phy/mv88e61xx.c
+++ b/drivers/net/phy/mv88e61xx.c
@@ -94,6 +94,8 @@
 #define PORT_REG_STATUS_CMODE_1000BASE_X	0x9
 #define PORT_REG_STATUS_CMODE_SGMII		0xa
 
+#define PORT_REG_PHYS_CTRL_RGMII_RX_DELAY	BIT(15)
+#define PORT_REG_PHYS_CTRL_RGMII_TX_DELAY	BIT(14)
 #define PORT_REG_PHYS_CTRL_PCS_AN_EN	BIT(10)
 #define PORT_REG_PHYS_CTRL_PCS_AN_RST	BIT(9)
 #define PORT_REG_PHYS_CTRL_FC_VALUE	BIT(7)
@@ -747,9 +749,16 @@ static int mv88e61xx_fixed_port_setup(struct phy_device *phydev, u8 port)
 		       PORT_REG_PHYS_CTRL_SPD1000;
 	}
 
-	if (port == CONFIG_MV88E61XX_CPU_PORT)
+	if (port == CONFIG_MV88E61XX_CPU_PORT) {
 		val |= PORT_REG_PHYS_CTRL_LINK_VALUE |
 		       PORT_REG_PHYS_CTRL_LINK_FORCE;
+#if defined(CONFIG_MV88E61XX_CPU_PORT_RX_DELAY)
+		val |= PORT_REG_PHYS_CTRL_RGMII_RX_DELAY;
+#endif
+#if defined(CONFIG_MV88E61XX_CPU_PORT_TX_DELAY)
+		val |= PORT_REG_PHYS_CTRL_RGMII_TX_DELAY;
+#endif
+	}
 
 	return mv88e61xx_port_write(phydev, port, PORT_REG_PHYS_CTRL,
 				   val);
-- 
2.20.1