[PATCH 08/11] configs: stm32mp1: remove optee defconfig

Patrice CHOTARD patrice.chotard at st.com
Tue Apr 14 11:32:58 CEST 2020


Hi

On 3/18/20 9:22 AM, Patrick Delaunay wrote:
> As the op-tee presence is detected by U-boot, the stm32mp15_optee_defconfig
> is identical to stm32mp15_trusted_defconfig and can be removed.
>
> Signed-off-by: Patrick Delaunay <patrick.delaunay at st.com>
> ---

Reviewed-by: Patrice Chotard <patrice.chotard at st.com>

Patrice


>  board/st/stm32mp1/MAINTAINERS     |   1 -
>  configs/stm32mp15_optee_defconfig | 134 ------------------------------
>  doc/board/st/stm32mp1.rst         |  32 ++-----
>  3 files changed, 7 insertions(+), 160 deletions(-)
>  delete mode 100644 configs/stm32mp15_optee_defconfig
>
> diff --git a/board/st/stm32mp1/MAINTAINERS b/board/st/stm32mp1/MAINTAINERS
> index 2930947716..96c4559033 100644
> --- a/board/st/stm32mp1/MAINTAINERS
> +++ b/board/st/stm32mp1/MAINTAINERS
> @@ -6,6 +6,5 @@ S:	Maintained
>  F:	arch/arm/dts/stm32mp15*
>  F:	board/st/stm32mp1/
>  F:	configs/stm32mp15_basic_defconfig
> -F:	configs/stm32mp15_optee_defconfig
>  F:	configs/stm32mp15_trusted_defconfig
>  F:	include/configs/stm32mp1.h
> diff --git a/configs/stm32mp15_optee_defconfig b/configs/stm32mp15_optee_defconfig
> deleted file mode 100644
> index f0d524d344..0000000000
> --- a/configs/stm32mp15_optee_defconfig
> +++ /dev/null
> @@ -1,134 +0,0 @@
> -CONFIG_ARM=y
> -CONFIG_ARCH_STM32MP=y
> -CONFIG_SYS_MALLOC_F_LEN=0x3000
> -CONFIG_ENV_SECT_SIZE=0x40000
> -CONFIG_ENV_OFFSET=0x280000
> -CONFIG_TARGET_ST_STM32MP15x=y
> -CONFIG_ENV_OFFSET_REDUND=0x2C0000
> -CONFIG_DISTRO_DEFAULTS=y
> -CONFIG_FIT=y
> -CONFIG_BOOTCOMMAND="run bootcmd_stm32mp"
> -CONFIG_SYS_PROMPT="STM32MP> "
> -# CONFIG_CMD_BOOTD is not set
> -# CONFIG_CMD_ELF is not set
> -# CONFIG_CMD_IMI is not set
> -# CONFIG_CMD_XIMG is not set
> -# CONFIG_CMD_EXPORTENV is not set
> -# CONFIG_CMD_IMPORTENV is not set
> -CONFIG_CMD_MEMINFO=y
> -CONFIG_CMD_MEMTEST=y
> -CONFIG_CMD_ADC=y
> -CONFIG_CMD_CLK=y
> -CONFIG_CMD_DFU=y
> -CONFIG_CMD_FUSE=y
> -CONFIG_CMD_GPIO=y
> -CONFIG_CMD_GPT=y
> -CONFIG_CMD_I2C=y
> -CONFIG_CMD_MMC=y
> -CONFIG_CMD_MTD=y
> -CONFIG_CMD_REMOTEPROC=y
> -CONFIG_CMD_SPI=y
> -CONFIG_CMD_USB=y
> -CONFIG_CMD_USB_MASS_STORAGE=y
> -CONFIG_CMD_BMP=y
> -CONFIG_CMD_CACHE=y
> -CONFIG_CMD_TIME=y
> -CONFIG_CMD_TIMER=y
> -CONFIG_CMD_PMIC=y
> -CONFIG_CMD_REGULATOR=y
> -CONFIG_CMD_EXT4_WRITE=y
> -CONFIG_CMD_MTDPARTS=y
> -CONFIG_CMD_UBI=y
> -CONFIG_DEFAULT_DEVICE_TREE="stm32mp157c-ev1"
> -CONFIG_ENV_IS_NOWHERE=y
> -CONFIG_ENV_IS_IN_EXT4=y
> -CONFIG_ENV_IS_IN_SPI_FLASH=y
> -CONFIG_ENV_IS_IN_UBI=y
> -CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
> -CONFIG_ENV_EXT4_INTERFACE="mmc"
> -CONFIG_ENV_EXT4_DEVICE_AND_PART="0:auto"
> -CONFIG_ENV_EXT4_FILE="/uboot.env"
> -CONFIG_ENV_UBI_PART="UBI"
> -CONFIG_ENV_UBI_VOLUME="uboot_config"
> -CONFIG_ENV_UBI_VOLUME_REDUND="uboot_config_r"
> -CONFIG_SYS_RELOC_GD_ENV_ADDR=y
> -CONFIG_STM32_ADC=y
> -CONFIG_DFU_MMC=y
> -CONFIG_DFU_RAM=y
> -CONFIG_DFU_MTD=y
> -CONFIG_DFU_VIRT=y
> -CONFIG_SET_DFU_ALT_INFO=y
> -CONFIG_USB_FUNCTION_FASTBOOT=y
> -CONFIG_FASTBOOT_BUF_ADDR=0xC0000000
> -CONFIG_FASTBOOT_BUF_SIZE=0x02000000
> -CONFIG_FASTBOOT_USB_DEV=1
> -CONFIG_FASTBOOT_FLASH=y
> -CONFIG_FASTBOOT_FLASH_MMC_DEV=1
> -CONFIG_DM_HWSPINLOCK=y
> -CONFIG_HWSPINLOCK_STM32=y
> -CONFIG_DM_I2C=y
> -CONFIG_SYS_I2C_STM32F7=y
> -CONFIG_LED=y
> -CONFIG_LED_GPIO=y
> -CONFIG_DM_MAILBOX=y
> -CONFIG_STM32_IPCC=y
> -CONFIG_DM_MMC=y
> -CONFIG_SUPPORT_EMMC_BOOT=y
> -CONFIG_STM32_SDMMC2=y
> -CONFIG_MTD=y
> -CONFIG_DM_MTD=y
> -CONFIG_SYS_MTDPARTS_RUNTIME=y
> -CONFIG_MTD_RAW_NAND=y
> -CONFIG_NAND_STM32_FMC2=y
> -CONFIG_MTD_SPI_NAND=y
> -CONFIG_DM_SPI_FLASH=y
> -CONFIG_SPI_FLASH_MACRONIX=y
> -CONFIG_SPI_FLASH_SPANSION=y
> -CONFIG_SPI_FLASH_STMICRO=y
> -CONFIG_SPI_FLASH_WINBOND=y
> -# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
> -CONFIG_SPI_FLASH_MTD=y
> -CONFIG_DM_ETH=y
> -CONFIG_DWC_ETH_QOS=y
> -CONFIG_PHY=y
> -CONFIG_PHY_STM32_USBPHYC=y
> -CONFIG_PINCONF=y
> -CONFIG_PINCTRL_STMFX=y
> -CONFIG_DM_PMIC=y
> -CONFIG_PMIC_STPMIC1=y
> -CONFIG_DM_REGULATOR_FIXED=y
> -CONFIG_DM_REGULATOR_GPIO=y
> -CONFIG_DM_REGULATOR_STM32_VREFBUF=y
> -CONFIG_DM_REGULATOR_STPMIC1=y
> -CONFIG_REMOTEPROC_STM32_COPRO=y
> -CONFIG_DM_RNG=y
> -CONFIG_RNG_STM32MP1=y
> -CONFIG_DM_RTC=y
> -CONFIG_RTC_STM32=y
> -CONFIG_SERIAL_RX_BUFFER=y
> -CONFIG_SPI=y
> -CONFIG_DM_SPI=y
> -CONFIG_STM32_QSPI=y
> -CONFIG_STM32_SPI=y
> -CONFIG_TEE=y
> -CONFIG_OPTEE=y
> -# CONFIG_OPTEE_TA_AVB is not set
> -CONFIG_USB=y
> -CONFIG_DM_USB=y
> -CONFIG_DM_USB_GADGET=y
> -CONFIG_USB_EHCI_HCD=y
> -CONFIG_USB_EHCI_GENERIC=y
> -CONFIG_USB_GADGET=y
> -CONFIG_USB_GADGET_MANUFACTURER="STMicroelectronics"
> -CONFIG_USB_GADGET_VENDOR_NUM=0x0483
> -CONFIG_USB_GADGET_PRODUCT_NUM=0x5720
> -CONFIG_USB_GADGET_DWC2_OTG=y
> -CONFIG_DM_VIDEO=y
> -CONFIG_BACKLIGHT_GPIO=y
> -CONFIG_VIDEO_LCD_ORISETECH_OTM8009A=y
> -CONFIG_VIDEO_LCD_RAYDIUM_RM68200=y
> -CONFIG_VIDEO_STM32=y
> -CONFIG_VIDEO_STM32_DSI=y
> -CONFIG_VIDEO_STM32_MAX_XRES=1280
> -CONFIG_VIDEO_STM32_MAX_YRES=800
> -CONFIG_FDT_FIXUP_PARTITIONS=y
> diff --git a/doc/board/st/stm32mp1.rst b/doc/board/st/stm32mp1.rst
> index b7a0fbfd03..7fccdfbb94 100644
> --- a/doc/board/st/stm32mp1.rst
> +++ b/doc/board/st/stm32mp1.rst
> @@ -80,32 +80,16 @@ defconfig_file : stm32mp15_trusted_defconfig
>      +             +-------------------------+------------+-------+
>      |             |Trusted Firmware-A (TF-A)| U-Boot     | Linux |
>      +-------------+-------------------------+------------+-------+
> -    | TrustZone   |TF-A secure monitor                           |
> +    | TrustZone   |secure monitor                                |
>      +-------------+-------------------------+------------+-------+
>  
>  TF-A performs a full initialization of Secure peripherals and installs a
> -secure monitor (BL32=SPMin).
> +secure monitor, BL32:
>  
> -U-Boot is running in normal world and uses TF-A monitor to access
> -to secure resources.
> -
> -The **Trusted** boot chain with **OP-TEE**
> -``````````````````````````````````````````
> -
> -defconfig_file : stm32mp15_optee_defconfig
> -
> -    +-------------+-------------------------+------------+-------+
> -    |  ROM code   | FSBL                    | SSBL       | OS    |
> -    +             +-------------------------+------------+-------+
> -    |             |Trusted Firmware-A (TF-A)| U-Boot     | Linux |
> -    +-------------+-------------------------+------------+-------+
> -    | TrustZone   |OP-TEE                                        |
> -    +-------------+-------------------------+------------+-------+
> -
> -TF-A performs a full initialization of Secure peripherals and installs OP-TEE
> -from specific partitions (teeh, teed, teex).
> +  * SPMin provided by TF-A or
> +  * OP-TEE from specific partitions (teeh, teed, teex).
>  
> -U-Boot is running in normal world and uses OP-TEE monitor to access
> +U-Boot is running in normal world and uses the secure monitor to access
>  to secure resources.
>  
>  The **Basic** boot chain
> @@ -180,7 +164,6 @@ Build Procedure
>     for example: use one output directory for each configuration::
>  
>     # export KBUILD_OUTPUT=stm32mp15_trusted
> -   # export KBUILD_OUTPUT=stm32mp15_optee
>     # export KBUILD_OUTPUT=stm32mp15_basic
>  
>     you can build outside of code directory::
> @@ -194,7 +177,6 @@ Build Procedure
>     with <defconfig_file>:
>  
>     - For **trusted** boot mode : **stm32mp15_trusted_defconfig**
> -   - For **trusted** with OP-TEE boot mode : **stm32mp15_optee_defconfig**
>     - For basic boot mode: stm32mp15_basic_defconfig
>  
>  5. Configure the device-tree and build the U-Boot image::
> @@ -211,8 +193,8 @@ Build Procedure
>  
>    b) trusted with OP-TEE boot on dk2::
>  
> -      # export KBUILD_OUTPUT=stm32mp15_optee
> -      # make stm32mp15_optee_defconfig
> +      # export KBUILD_OUTPUT=stm32mp15_trusted
> +      # make stm32mp15_trusted_defconfig
>        # make DEVICE_TREE=stm32mp157c-dk2 all
>  
>    c) basic boot on ev1::


More information about the U-Boot mailing list