[Uboot-stm32] [PATCH 3/3] configs:stm32mp1: activate env config in SPL
Patrice CHOTARD
patrice.chotard at st.com
Tue Apr 14 15:18:22 CEST 2020
Hi
On 3/19/20 11:21 AM, Patrick Delaunay wrote:
> Activate env config in SPL with CONFIG_SPL_ENV_SUPPORT
> and use CONFIG_IS_ENABLED macro to test the activated
> CONFIG_$(SPL_)ENV_IS_IN_... in env_get_location.
>
> Signed-off-by: Patrick Delaunay <patrick.delaunay at st.com>
> ---
>
> board/st/stm32mp1/stm32mp1.c | 8 ++++----
> configs/stm32mp15_basic_defconfig | 3 +++
> 2 files changed, 7 insertions(+), 4 deletions(-)
>
> diff --git a/board/st/stm32mp1/stm32mp1.c b/board/st/stm32mp1/stm32mp1.c
> index effba41ad1..474033d640 100644
> --- a/board/st/stm32mp1/stm32mp1.c
> +++ b/board/st/stm32mp1/stm32mp1.c
> @@ -785,21 +785,21 @@ enum env_location env_get_location(enum env_operation op, int prio)
> return ENVL_UNKNOWN;
>
> switch (bootmode & TAMP_BOOT_DEVICE_MASK) {
> -#ifdef CONFIG_ENV_IS_IN_MMC
> +#if CONFIG_IS_ENABLED(ENV_IS_IN_MMC)
> case BOOT_FLASH_SD:
> case BOOT_FLASH_EMMC:
> return ENVL_MMC;
> #endif
> -#ifdef CONFIG_ENV_IS_IN_EXT4
> +#if CONFIG_IS_ENABLED(ENV_IS_IN_EXT4)
> case BOOT_FLASH_SD:
> case BOOT_FLASH_EMMC:
> return ENVL_EXT4;
> #endif
> -#ifdef CONFIG_ENV_IS_IN_UBI
> +#if CONFIG_IS_ENABLED(ENV_IS_IN_UBI)
> case BOOT_FLASH_NAND:
> return ENVL_UBI;
> #endif
> -#ifdef CONFIG_ENV_IS_IN_SPI_FLASH
> +#if CONFIG_IS_ENABLED(ENV_IS_IN_SPI_FLASH)
> case BOOT_FLASH_NOR:
> return ENVL_SPI_FLASH;
> #endif
> diff --git a/configs/stm32mp15_basic_defconfig b/configs/stm32mp15_basic_defconfig
> index dd55a8b632..c63002628c 100644
> --- a/configs/stm32mp15_basic_defconfig
> +++ b/configs/stm32mp15_basic_defconfig
> @@ -16,6 +16,7 @@ CONFIG_FIT=y
> CONFIG_BOOTCOMMAND="run bootcmd_stm32mp"
> CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
> CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3
> +CONFIG_SPL_ENV_SUPPORT=y
> CONFIG_SPL_I2C_SUPPORT=y
> CONFIG_SPL_MTD_SUPPORT=y
> CONFIG_SPL_POWER_SUPPORT=y
> @@ -63,6 +64,8 @@ CONFIG_ENV_UBI_PART="UBI"
> CONFIG_ENV_UBI_VOLUME="uboot_config"
> CONFIG_ENV_UBI_VOLUME_REDUND="uboot_config_r"
> CONFIG_SYS_RELOC_GD_ENV_ADDR=y
> +# CONFIG_SPL_ENV_IS_NOWHERE is not set
> +# CONFIG_SPL_ENV_IS_IN_SPI_FLASH is not set
> CONFIG_STM32_ADC=y
> CONFIG_DFU_MMC=y
> CONFIG_DFU_RAM=y
Reviewed-by: Patrice Chotard <patrice.chotard at st.com>
Thanks
Patrice
More information about the U-Boot
mailing list