[PATCH u-boot-marvell 1/1] clk: armada-37xx-periph: fix DDR PHY clock divider values

[Marek Behún]

Register value table for DDR PHY clock divider are wrong. They should be
0 or 1 for divide-by-2 or divide-by-4, respectively. Not 1 or 2. Current
values do not make sense, since 2 cannot be achieved, because the
register is only 1 bit long (mask is set to 1).

This fixes clk dump reporting DDR PHY clock rate differently from Linux.

Signed-off-by: Marek Behún <marek.behun at nic.cz>
---
 drivers/clk/mvebu/armada-37xx-periph.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/mvebu/armada-37xx-periph.c b/drivers/clk/mvebu/armada-37xx-periph.c
index 068e48ea04..855f979b4f 100644
--- a/drivers/clk/mvebu/armada-37xx-periph.c
+++ b/drivers/clk/mvebu/armada-37xx-periph.c
@@ -89,8 +89,8 @@ static const struct clk_div_table div_table1[] = {
 };
 
 static const struct clk_div_table div_table2[] = {
-	{ 2, 1 },
-	{ 4, 2 },
+	{ 2, 0 },
+	{ 4, 1 },
 	{ 0, 0 },
 };
 
-- 
2.24.1