[PATCH] ARM: dts: stm32: Rename LEDs to match silkscreen on AV96

[Patrice CHOTARD]

Hi

On 4/6/20 8:01 PM, Manivannan Sadhasivam wrote:
> On Mon, Apr 06, 2020 at 03:05:58PM +0200, Marek Vasut wrote:
>> The LED labels do not match the silkscreen on the board, fix it.
>>
>> Signed-off-by: Marek Vasut <marex at denx.de>
> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>
>
> Thanks,
> Mani
Applied to u-boot-stm/next

Thanks

Patrice
>> Cc: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>
>> Cc: Patrick Delaunay <patrick.delaunay at st.com>
>> Cc: Patrice Chotard <patrice.chotard at st.com>
>> Cc: Tom Rini <trini at konsulko.com>
>> ---
>>  arch/arm/dts/stm32mp157a-avenger96.dts | 6 +++---
>>  1 file changed, 3 insertions(+), 3 deletions(-)
>>
>> diff --git a/arch/arm/dts/stm32mp157a-avenger96.dts b/arch/arm/dts/stm32mp157a-avenger96.dts
>> index 1f32395e71..735228a895 100644
>> --- a/arch/arm/dts/stm32mp157a-avenger96.dts
>> +++ b/arch/arm/dts/stm32mp157a-avenger96.dts
>> @@ -36,21 +36,21 @@
>>  	led {
>>  		compatible = "gpio-leds";
>>  		led1 {
>> -			label = "green:user1";
>> +			label = "green:user0";
>>  			gpios = <&gpioz 7 GPIO_ACTIVE_HIGH>;
>>  			linux,default-trigger = "heartbeat";
>>  			default-state = "off";
>>  		};
>>  
>>  		led2 {
>> -			label = "green:user2";
>> +			label = "green:user1";
>>  			gpios = <&gpiof 3 GPIO_ACTIVE_HIGH>;
>>  			linux,default-trigger = "mmc0";
>>  			default-state = "off";
>>  		};
>>  
>>  		led3 {
>> -			label = "green:user3";
>> +			label = "green:user2";
>>  			gpios = <&gpiog 0 GPIO_ACTIVE_HIGH>;
>>  			linux,default-trigger = "mmc1";
>>  			default-state = "off";
>> -- 
>> 2.25.1
>>