[PATCH] armv8: ls1046ardb: add new 16GB udimm memory support

[Priyanka Jain (OSS)]

>-----Original Message-----
>From: U-Boot <u-boot-bounces at lists.denx.de> On Behalf Of
>andy.tang at nxp.com
>Sent: Friday, April 3, 2020 12:30 PM
>To: Priyanka Jain <priyanka.jain at nxp.com>
>Cc: Mingkai Hu <mingkai.hu at nxp.com>; Rajesh Bhagat
><rajesh.bhagat at nxp.com>; u-boot at lists.denx.de; Andy Tang
><andy.tang at nxp.com>
>Subject: [PATCH] armv8: ls1046ardb: add new 16GB udimm memory support
>
>From: Yuantian Tang <andy.tang at nxp.com>
>
>Add this udimm memory support on ls1046ardb board.
What is this?
I see in code, you are adding DIMM specific parameter to support new frequency.
Is this code changes because you are adding a different DIMM or adding support for new frequency?
If new DIMM, What if someone tried to use the frequency "2133" with the original dim on board.

Please provide more details in description.

Thanks
Priyanka
>
>Signed-off-by: Yuantian Tang <andy.tang at nxp.com>
>---
> board/freescale/ls1046ardb/ddr.h | 1 +
> 1 file changed, 1 insertion(+)
>
>diff --git a/board/freescale/ls1046ardb/ddr.h
>b/board/freescale/ls1046ardb/ddr.h
>index 3b4d44d465..d401daa776 100644
>--- a/board/freescale/ls1046ardb/ddr.h
>+++ b/board/freescale/ls1046ardb/ddr.h
>@@ -32,6 +32,7 @@ static const struct board_specific_parameters udimm0[]
>= {
> 	{2,  1350, 0, 8,     6, 0x0708090B, 0x0C0D0E09,},
> 	{2,  1666, 0, 8,     7, 0x08090A0C, 0x0D0F100B,},
> 	{2,  1900, 0, 8,     7, 0x09090B0D, 0x0E10120B,},
>+	{2,  2133, 0, 4,     7, 0x08090A0E, 0x1011120C,},
> 	{2,  2300, 0, 8,     9, 0x0A0B0C10, 0x1213140E,},
> 	{}
> };
>--
>2.17.1