Antwort: Re: Re: [PATCH v3 13/29] dts: Add a binding for hid-over-i2c
Wolfgang Wallner
wolfgang.wallner at br-automation.com
Wed Apr 15 16:00:05 CEST 2020
Hi Andy,
-----"Andy Shevchenko" <andy.shevchenko at gmail.com> schrieb: -----
> Betreff: Re: Re: [PATCH v3 13/29] dts: Add a binding for hid-over-i2c
>
> On Wed, Apr 8, 2020 at 11:40 PM Andy Shevchenko
> <andy.shevchenko at gmail.com> wrote:
> > On Wed, Apr 8, 2020 at 10:39 PM Wolfgang Wallner
> > <wolfgang.wallner at br-automation.com> wrote:
> > > > On Tue, Apr 07, 2020 at 08:58:13PM -0600, Simon Glass wrote:
> > > > > On Tue, 31 Mar 2020 at 13:25, Wolfgang Wallner
> > > > > <wolfgang.wallner at br-automation.com> wrote:
> > > > > > >An: u-boot at lists.denx.de
> > > > > > >Von: "Simon Glass" <sjg at chromium.org>
> > > > > > >Datum: 31.03.2020 01:14
> > > > > > >Kopie: "Andy Shevchenko" <andriy.shevchenko at linux.intel.com>,
> > > > > > >"Wolfgang Wallner" <wolfgang.wallner at br-automation.com>, "Leif
> > > > > > >Lindholm" <leif at nuviainc.com>, "Simon Glass" <sjg at chromium.org>
> > > > > > >Betreff: [PATCH v3 14/29] acpi: Add a binding for ACPI settings in
> > > > > > >the device tree
> > > >
> > > > > > The _DSD-method for "PRP0001"-devices in ACPI allows to use Devicetree
> > > > > > properties inside ACPI, especially it allows to re-use Devicetree's
> > > > > > "compatible"-property. But this is for a different use case (using Devicetree
> > > > > > properties inside ACPI, not add ACPI properties in Devicetree).
> > > >
> > > > Before we are going further with this here is a BIG CAVEAT.
> > > >
> > > > PRP0001 MUST NOT be used in production devices.
> > > >
> > > > This has been derived solely for debugging / pre-production testing / etc
> > > > purposes. The real devices must have an official ACPI _HID.
> > >
> > > Thanks for pointing this out! I was not aware of this.
> > > I have tried to understand how the PRP0001 is meant to be used, but could not
> > > find sufficient documentation. The best document I could find is
> > > Documentation/firmware-guide/acpi/enumeration.rst in the Linux kernel, and
> > > as far as I can tell the constraint that you mention is also not described
> > > there.
> > >
> > > Do you know any other resources regarding PRP0001, e.g. some kind of
> > > speficiation?
> >
> > I guess the best one is to ask somebody from UEFI Forum / ASWG. PRP is
> > a PNP ID for UEFI Forum.
>
> Basically last message in [3] from Rafael mentions his view on
> PRP0001. I guess there is still no document, although as I noticed the
> PRP prefix become official in a mean time.
Thanks for the references. I have read them carefully, especially the thread
in [3].
My understanding up to now was based on presentations by David Woodhouse,
so it matches with his viewpoint in the thread at [3]. And as far as I can
tell Rafael Wysocki agrees with him in this thread.
What I could not find in either of the references is that PRP0001 is only
for debugging, I only know about this constraint from your mail. Could you
point me to any source for this?
> > > If PRP0001 is only for debugging, then I must also have misunderstood the
> > > Linux "device-property" API (define in include/linux/property.h).
> >
> > Not exactly.
> >
> > > There are some presentations available on the internet, e.g. [1], that I
> > > understand like PRP0001 + "device-property" API provide a way do access data
> > > from either Devicetree or ACPI, depending on what kind of platform you are on.
> >
> > No, these are not hard linked to each other (the relation is that
> > PRP0001 is a way to enumerate devices, which don't have dedicated ACPI
> > _HID, by using compatible property [1]). The _DSD per se (i.o.w.
> > device properties implementation in ACPI) is a different story [2].
> >
> > And I put [3] here, interesting to read. However, at that time I was
> > quite far from this topic.
> >
> > [1]: https://www.kernel.org/doc/html/latest/firmware-guide/acpi/enumeration.html#device-tree-namespace-link-device-id
> > [2]: https://uefi.org/sites/default/files/resources/_DSD-implementation-guide-toplevel-1_2-3.htm.
> > [3]: https://patchwork.kernel.org/patch/7004241/
> >
> > > [1] https://elinux.org/images/2/2d/Device_tree_acpi_compatibility-david_woodhouse-kernel_recipes_2015.pdf
> >
> > --
> > With Best Regards,
> > Andy Shevchenko
regards, Wolfgang
PS: I only realized now that I had mixed up the email-subject in my first
reply and now the complete thread is under the wrong topic. Sorry for that.
More information about the U-Boot
mailing list