[PATCH 08/27] dm: powerpc: P2020RDB: add i2c DM support

[Priyanka Jain (OSS)]

>-----Original Message-----
>From: U-Boot <u-boot-bounces at lists.denx.de> On Behalf Of Biwen Li
>Sent: Sunday, April 12, 2020 2:24 PM
>To: Jagdish Gediya <jagdish.gediya at nxp.com>; Priyanka Jain
><priyanka.jain at nxp.com>; hs at denx.de; jagan at amarulasolutions.com;
>aford173 at gmail.com; Alison Wang <alison.wang at nxp.com>;
>jh80.chung at samsung.com; Pramod Kumar <pramod.kumar_1 at nxp.com>;
>Rajesh Bhagat <rajesh.bhagat at nxp.com>; Ruchika Gupta
><ruchika.gupta at nxp.com>; olteanv at gmail.com
>Cc: Xiaobo Xie <xiaobo.xie at nxp.com>; Jiafei Pan <jiafei.pan at nxp.com>; u-
>boot at lists.denx.de; Z.q. Hou <zhiqiang.hou at nxp.com>; Biwen Li
><biwen.li at nxp.com>
>Subject: [PATCH 08/27] dm: powerpc: P2020RDB: add i2c DM support
>
>From: Biwen Li <biwen.li at nxp.com>
>
>This supports i2c DM for board P2020RDB
>
>Signed-off-by: Biwen Li <biwen.li at nxp.com>
>---
> arch/powerpc/dts/p2020-post.dtsi | 3 +++
> arch/powerpc/dts/p2020.dtsi      | 2 +-
> include/configs/p1_p2_rdb_pc.h   | 2 +-
> 3 files changed, 5 insertions(+), 2 deletions(-)
>
>diff --git a/arch/powerpc/dts/p2020-post.dtsi b/arch/powerpc/dts/p2020-
>post.dtsi
>index 5bbd5c5468..4ed093dad4 100644
>--- a/arch/powerpc/dts/p2020-post.dtsi
>+++ b/arch/powerpc/dts/p2020-post.dtsi
>@@ -37,6 +37,9 @@
> 		/* Filled in by U-Boot */
> 		clock-frequency = <0>;
> 	};
>+
>+	/include/ "pq3-i2c-0.dtsi"
>+	/include/ "pq3-i2c-1.dtsi"
> };
>
> /* PCIe controller base address 0x8000 */ diff --git
>a/arch/powerpc/dts/p2020.dtsi b/arch/powerpc/dts/p2020.dtsi index
>7c4c2061d4..13a4a51526 100644
>--- a/arch/powerpc/dts/p2020.dtsi
>+++ b/arch/powerpc/dts/p2020.dtsi
>@@ -3,7 +3,7 @@
>  * P2020 Silicon/SoC Device Tree Source (pre include)
>  *
>  * Copyright 2013 Freescale Semiconductor Inc.
>- * Copyright 2019 NXP
>+ * Copyright 2019-2020 NXP
>  */
>
> /dts-v1/;
>diff --git a/include/configs/p1_p2_rdb_pc.h
>b/include/configs/p1_p2_rdb_pc.h index 7089b69bf3..d59fd033bd 100644
>--- a/include/configs/p1_p2_rdb_pc.h
>+++ b/include/configs/p1_p2_rdb_pc.h
>@@ -538,8 +538,8 @@
> #define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR+0x4600)
>
> /* I2C */
>+#ifndef CONFIG_DM_I2C
> #define CONFIG_SYS_I2C
>-#define CONFIG_SYS_I2C_FSL
> #define CONFIG_SYS_FSL_I2C_SPEED	400000
> #define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
> #define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
>--
>2.17.1
This changes were supposed to be merged with a previous patch.
We need to ensure that all patches are compiling independently successfully.

Do run buildman test before submitting the next version of this patch set.

Regards
Priyanka