[PATCH v5 3/8] i2c: i2c-cortina: added CAxxxx I2C support
Alex Nemirovsky
alex.nemirovsky at cortina-access.com
Fri Apr 17 03:43:43 CEST 2020
From: Arthur Li <arthur.li at cortina-access.com>
Add I2C controller support for Cortina Access CAxxxx SoCs
Signed-off-by: Arthur Li <arthur.li at cortina-access.com>
Signed-off-by: Alex Nemirovsky <alex.nemirovsky at cortina-access.com>
CC: Heiko Schocher <hs at denx.de>
---
Changes in v5: None
Changes in v4:
- Utilize standard I2C macros from <i2c.h>
- Return ETIMEDOUT in funcs that can timeout
- Return i2c_xfer_init() result to caller of i2c_read() if it
fails within i2c_read() execution
- Fix misc. style guide conformance issues
- Use printf() to report i2c_xfer() runtime errors
instead of debug()
Changes in v3: None
Changes in v2: None
MAINTAINERS | 4 +
drivers/i2c/Kconfig | 7 +
drivers/i2c/Makefile | 1 +
drivers/i2c/i2c-cortina.c | 346 ++++++++++++++++++++++++++++++++++++++++++++++
drivers/i2c/i2c-cortina.h | 84 +++++++++++
5 files changed, 442 insertions(+)
create mode 100644 drivers/i2c/i2c-cortina.c
create mode 100644 drivers/i2c/i2c-cortina.h
diff --git a/MAINTAINERS b/MAINTAINERS
index b50652b..cc56ade 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -181,6 +181,8 @@ F: drivers/gpio/cortina_gpio.c
F: drivers/watchdog/cortina_wdt.c
F: drivers/serial/serial_cortina.c
F: drivers/mmc/ca_dw_mmc.c
+F: drivers/i2c/i2c-cortina.c
+F: drivers/i2c/i2c-cortina.h
ARM/CZ.NIC TURRIS MOX SUPPORT
M: Marek Behun <marek.behun at nic.cz>
@@ -694,6 +696,8 @@ F: drivers/gpio/cortina_gpio.c
F: drivers/watchdog/cortina_wdt.c
F: drivers/serial/serial_cortina.c
F: drivers/mmc/ca_dw_mmc.c
+F: drivers/i2c/i2c-cortina.c
+F: drivers/i2c/i2c-cortina.h
MIPS MSCC
M: Gregory CLEMENT <gregory.clement at bootlin.com>
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 03d2fed..b98a4aa 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -85,6 +85,13 @@ config SYS_I2C_CADENCE
Say yes here to select Cadence I2C Host Controller. This controller is
e.g. used by Xilinx Zynq.
+config SYS_I2C_CA
+ tristate "Cortina-Access I2C Controller"
+ depends on DM_I2C && CORTINA_PLATFORM
+ default n
+ help
+ Say yes here to select Cortina-Access I2C Host Controller.
+
config SYS_I2C_DAVINCI
bool "Davinci I2C Controller"
depends on (ARCH_KEYSTONE || ARCH_DAVINCI)
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index f5a471f..5d18cf7 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_SYS_I2C) += i2c_core.o
obj-$(CONFIG_SYS_I2C_ASPEED) += ast_i2c.o
obj-$(CONFIG_SYS_I2C_AT91) += at91_i2c.o
obj-$(CONFIG_SYS_I2C_CADENCE) += i2c-cdns.o
+obj-$(CONFIG_SYS_I2C_CA) += i2c-cortina.o
obj-$(CONFIG_SYS_I2C_DAVINCI) += davinci_i2c.o
obj-$(CONFIG_SYS_I2C_DW) += designware_i2c.o
ifdef CONFIG_DM_PCI
diff --git a/drivers/i2c/i2c-cortina.c b/drivers/i2c/i2c-cortina.c
new file mode 100644
index 0000000..08b812a
--- /dev/null
+++ b/drivers/i2c/i2c-cortina.c
@@ -0,0 +1,346 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2020
+ * Arthur Li, Cortina Access, arthur.li at cortina-access.com.
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <asm/io.h>
+#include <dm.h>
+#include <mapmem.h>
+#include "i2c-cortina.h"
+
+static void set_speed(struct i2c_regs *regs, int i2c_spd)
+{
+ union ca_biw_cfg i2c_cfg;
+
+ i2c_cfg.wrd = readl(®s->i2c_cfg);
+ i2c_cfg.bf.core_en = 0;
+ writel(i2c_cfg.wrd, ®s->i2c_cfg);
+
+ switch (i2c_spd) {
+ case IC_SPEED_MODE_FAST_PLUS:
+ i2c_cfg.bf.prer = CORTINA_PER_IO_FREQ /
+ (5 * I2C_SPEED_FAST_PLUS_RATE) - 1;
+ break;
+
+ case IC_SPEED_MODE_STANDARD:
+ i2c_cfg.bf.prer = CORTINA_PER_IO_FREQ /
+ (5 * I2C_SPEED_STANDARD_RATE) - 1;
+ break;
+
+ case IC_SPEED_MODE_FAST:
+ default:
+ i2c_cfg.bf.prer = CORTINA_PER_IO_FREQ /
+ (5 * I2C_SPEED_FAST_RATE) - 1;
+ break;
+ }
+
+ i2c_cfg.bf.core_en = 1;
+ writel(i2c_cfg.wrd, ®s->i2c_cfg);
+}
+
+static int ca_i2c_set_bus_speed(struct udevice *bus, unsigned int speed)
+{
+ struct ca_i2c *priv = dev_get_priv(bus);
+ int i2c_spd;
+
+ if (speed >= I2C_SPEED_FAST_PLUS_RATE) {
+ i2c_spd = IC_SPEED_MODE_FAST_PLUS;
+ priv->speed = I2C_SPEED_FAST_PLUS_RATE;
+ } else if (speed >= I2C_SPEED_FAST_RATE) {
+ i2c_spd = IC_SPEED_MODE_FAST;
+ priv->speed = I2C_SPEED_FAST_RATE;
+ } else {
+ i2c_spd = IC_SPEED_MODE_STANDARD;
+ priv->speed = I2C_SPEED_STANDARD_RATE;
+ }
+
+ set_speed(priv->regs, i2c_spd);
+
+ return 0;
+}
+
+static int ca_i2c_get_bus_speed(struct udevice *bus)
+{
+ struct ca_i2c *priv = dev_get_priv(bus);
+
+ return priv->speed;
+}
+
+static void ca_i2c_init(struct i2c_regs *regs)
+{
+ union ca_biw_cfg i2c_cfg;
+
+ i2c_cfg.wrd = readl(®s->i2c_cfg);
+ i2c_cfg.bf.core_en = 0;
+ i2c_cfg.bf.biw_soft_reset = 1;
+ writel(i2c_cfg.wrd, ®s->i2c_cfg);
+ mdelay(10);
+ i2c_cfg.bf.biw_soft_reset = 0;
+ writel(i2c_cfg.wrd, ®s->i2c_cfg);
+
+ set_speed(regs, IC_SPEED_MODE_STANDARD);
+
+ i2c_cfg.wrd = readl(®s->i2c_cfg);
+ i2c_cfg.bf.core_en = 1;
+ writel(i2c_cfg.wrd, ®s->i2c_cfg);
+}
+
+static int i2c_wait_complete(struct i2c_regs *regs)
+{
+ union ca_biw_ctrl i2c_ctrl;
+ unsigned long start_time_bb = get_timer(0);
+
+ i2c_ctrl.wrd = readl(®s->i2c_ctrl);
+
+ while (i2c_ctrl.bf.biwdone == 0) {
+ i2c_ctrl.wrd = readl(®s->i2c_ctrl);
+
+ if (get_timer(start_time_bb) >
+ (unsigned long)(I2C_BYTE_TO_BB)) {
+ printf("%s not done!!!\n", __func__);
+ return -ETIMEDOUT;
+ }
+ }
+
+ /* Clear done bit */
+ writel(i2c_ctrl.wrd, ®s->i2c_ctrl);
+
+ return 0;
+}
+
+static void i2c_setaddress(struct i2c_regs *regs, unsigned int i2c_addr,
+ int write_read)
+{
+ writel(i2c_addr | write_read, ®s->i2c_txr);
+
+ writel(BIW_CTRL_START | BIW_CTRL_WRITE,
+ ®s->i2c_ctrl);
+
+ i2c_wait_complete(regs);
+}
+
+static int i2c_wait_for_bus_busy(struct i2c_regs *regs)
+{
+ union ca_biw_ack i2c_ack;
+ unsigned long start_time_bb = get_timer(0);
+
+ i2c_ack.wrd = readl(®s->i2c_ack);
+
+ while (i2c_ack.bf.biw_busy) {
+ i2c_ack.wrd = readl(®s->i2c_ack);
+
+ if (get_timer(start_time_bb) >
+ (unsigned long)(I2C_BYTE_TO_BB)) {
+ printf("%s: timeout!\n", __func__);
+ return -ETIMEDOUT;
+ }
+ }
+
+ return 0;
+}
+
+static int i2c_xfer_init(struct i2c_regs *regs, uint8_t chip, uint addr,
+ int alen, int write_read)
+{
+ int addr_len = alen;
+
+ if (i2c_wait_for_bus_busy(regs))
+ return 1;
+
+ /* First cycle must write addr + offset */
+ chip = ((chip & 0x7F) << 1);
+ if (alen == 0 && write_read == I2C_CMD_RD)
+ i2c_setaddress(regs, chip, I2C_CMD_RD);
+ else
+ i2c_setaddress(regs, chip, I2C_CMD_WT);
+
+ while (alen) {
+ alen--;
+ writel(addr, ®s->i2c_txr);
+ if (write_read == I2C_CMD_RD)
+ writel(BIW_CTRL_WRITE | BIW_CTRL_STOP,
+ ®s->i2c_ctrl);
+ else
+ writel(BIW_CTRL_WRITE, ®s->i2c_ctrl);
+ i2c_wait_complete(regs);
+ }
+
+ /* Send address again with Read flag if it's read command */
+ if (write_read == I2C_CMD_RD && addr_len > 0)
+ i2c_setaddress(regs, chip, I2C_CMD_RD);
+
+ return 0;
+}
+
+static int i2c_xfer_finish(struct i2c_regs *regs)
+{
+ /* Dummy read makes bus free */
+ writel(BIW_CTRL_READ | BIW_CTRL_STOP, ®s->i2c_ctrl);
+ i2c_wait_complete(regs);
+
+ if (i2c_wait_for_bus_busy(regs)) {
+ printf("Timed out waiting for bus\n");
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+static int ca_i2c_read(struct i2c_regs *regs, uint8_t chip, uint addr,
+ int alen, uint8_t *buffer, int len)
+{
+ unsigned long start_time_rx;
+ int rc = 0;
+
+ rc = i2c_xfer_init(regs, chip, addr, alen, I2C_CMD_RD);
+ if (rc)
+ return rc;
+
+ start_time_rx = get_timer(0);
+ while (len) {
+ /* ACK_IN is ack value to send during read.
+ * ack high only on the very last byte!
+ */
+ if (len == 1)
+ writel(BIW_CTRL_READ | BIW_CTRL_ACK_IN | BIW_CTRL_STOP,
+ ®s->i2c_ctrl);
+ else
+ writel(BIW_CTRL_READ, ®s->i2c_ctrl);
+
+ rc = i2c_wait_complete(regs);
+ udelay(1);
+
+ if (rc == 0) {
+ *buffer++ =
+ (uchar) readl(®s->i2c_rxr);
+ len--;
+ start_time_rx = get_timer(0);
+
+ } else if (get_timer(start_time_rx) > I2C_BYTE_TO) {
+ return -ETIMEDOUT;
+ }
+ }
+ i2c_xfer_finish(regs);
+ return rc;
+}
+
+static int ca_i2c_write(struct i2c_regs *regs, uint8_t chip, uint addr,
+ int alen, uint8_t *buffer, int len)
+{
+ int rc, nb = len;
+ unsigned long start_time_tx;
+
+ rc = i2c_xfer_init(regs, chip, addr, alen, I2C_CMD_WT);
+ if (rc)
+ return rc;
+
+ start_time_tx = get_timer(0);
+ while (len) {
+ writel(*buffer, ®s->i2c_txr);
+ if (len == 1)
+ writel(BIW_CTRL_WRITE | BIW_CTRL_STOP,
+ ®s->i2c_ctrl);
+ else
+ writel(BIW_CTRL_WRITE, ®s->i2c_ctrl);
+
+ rc = i2c_wait_complete(regs);
+
+ if (rc == 0) {
+ len--;
+ buffer++;
+ start_time_tx = get_timer(0);
+ } else if (get_timer(start_time_tx) > (nb * I2C_BYTE_TO)) {
+ return -ETIMEDOUT;
+ }
+ }
+
+ return 0;
+}
+
+static int ca_i2c_probe_chip(struct udevice *bus, uint chip_addr,
+ uint chip_flags)
+{
+ struct ca_i2c *priv = dev_get_priv(bus);
+ int ret;
+ u32 tmp;
+
+ /* Try to read the first location of the chip */
+ ret = ca_i2c_read(priv->regs, chip_addr, 0, 1, (uchar *)&tmp, 1);
+ if (ret)
+ ca_i2c_init(priv->regs);
+
+ return ret;
+}
+
+static int ca_i2c_xfer(struct udevice *bus, struct i2c_msg *msg, int nmsgs)
+{
+ struct ca_i2c *priv = dev_get_priv(bus);
+ int ret;
+
+ debug("i2c_xfer: %d messages\n", nmsgs);
+ for (; nmsgs > 0; nmsgs--, msg++) {
+ debug("i2c_xfer: chip=0x%x, len=0x%x\n", msg->addr, msg->len);
+ if (msg->flags & I2C_M_RD)
+ ret = ca_i2c_read(priv->regs, msg->addr, 0, 0,
+ msg->buf, msg->len);
+ else
+ ret = ca_i2c_write(priv->regs, msg->addr, 0, 0,
+ msg->buf, msg->len);
+
+ if (ret) {
+ printf("i2c_xfer: %s error\n",
+ msg->flags & I2C_M_RD ? "read" : "write");
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static const struct dm_i2c_ops ca_i2c_ops = {
+ .xfer = ca_i2c_xfer,
+ .probe_chip = ca_i2c_probe_chip,
+ .set_bus_speed = ca_i2c_set_bus_speed,
+ .get_bus_speed = ca_i2c_get_bus_speed,
+};
+
+static const struct udevice_id ca_i2c_ids[] = {
+ { .compatible = "cortina,ca-i2c", },
+ { }
+};
+
+static int ca_i2c_probe(struct udevice *bus)
+{
+ struct ca_i2c *priv = dev_get_priv(bus);
+
+ ca_i2c_init(priv->regs);
+
+ return 0;
+}
+
+static int ca_i2c_ofdata_to_platdata(struct udevice *bus)
+{
+ struct ca_i2c *priv = dev_get_priv(bus);
+
+ priv->regs = map_sysmem(dev_read_addr(bus), sizeof(struct i2c_regs));
+ if (!priv->regs) {
+ printf("I2C: base address is invalid\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+U_BOOT_DRIVER(i2c_cortina) = {
+ .name = "i2c_cortina",
+ .id = UCLASS_I2C,
+ .of_match = ca_i2c_ids,
+ .ofdata_to_platdata = ca_i2c_ofdata_to_platdata,
+ .probe = ca_i2c_probe,
+ .priv_auto_alloc_size = sizeof(struct ca_i2c),
+ .ops = &ca_i2c_ops,
+ .flags = DM_FLAG_PRE_RELOC,
+};
diff --git a/drivers/i2c/i2c-cortina.h b/drivers/i2c/i2c-cortina.h
new file mode 100644
index 0000000..2d46c4f
--- /dev/null
+++ b/drivers/i2c/i2c-cortina.h
@@ -0,0 +1,84 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2019
+ * Cortina Access, <www.cortina-access.com>
+ */
+
+#ifndef __CA_I2C_H_
+#define __CA_I2C_H_
+
+#if !defined(__ASSEMBLER__) && !defined(__ASSEMBLY__)
+struct i2c_regs {
+ u32 i2c_cfg;
+ u32 i2c_ctrl;
+ u32 i2c_txr;
+ u32 i2c_rxr;
+ u32 i2c_ack;
+ u32 i2c_ie0;
+ u32 i2c_int0;
+ u32 i2c_ie1;
+ u32 i2c_int1;
+ u32 i2c_stat;
+};
+
+union ca_biw_cfg {
+ struct biw_cfg {
+ u32 core_en : 1;
+ u32 biw_soft_reset : 1;
+ u32 busywait_en : 1;
+ u32 stretch_en : 1;
+ u32 arb_en : 1;
+ u32 clksync_en : 1;
+ u32 rsrvd1 : 2;
+ u32 spike_cnt : 4;
+ u32 rsrvd2 : 4;
+ u32 prer : 16;
+ } bf;
+ unsigned int wrd;
+};
+
+union ca_biw_ctrl {
+ struct biw_ctrl {
+ u32 biwdone : 1;
+ u32 rsrvd1 : 2;
+ u32 ack_in : 1;
+ u32 write : 1;
+ u32 read : 1;
+ u32 stop : 1;
+ u32 start : 1;
+ u32 rsrvd2 : 24;
+ } bf;
+ unsigned int wrd;
+};
+
+union ca_biw_ack {
+ struct biw_ack {
+ u32 al :1;
+ u32 biw_busy :1;
+ u32 ack_out :1;
+ u32 rsrvd1 :29;
+ } bf;
+ unsigned int wrd;
+};
+#endif /* !__ASSEMBLER__*/
+
+struct ca_i2c {
+ struct i2c_regs *regs;
+ unsigned int speed;
+};
+
+#define I2C_CMD_WT 0
+#define I2C_CMD_RD 1
+
+#define BIW_CTRL_DONE BIT(0)
+#define BIW_CTRL_ACK_IN BIT(3)
+#define BIW_CTRL_WRITE BIT(4)
+#define BIW_CTRL_READ BIT(5)
+#define BIW_CTRL_STOP BIT(6)
+#define BIW_CTRL_START BIT(7)
+
+#define I2C_BYTE_TO (CONFIG_SYS_HZ / 500)
+#define I2C_STOPDET_TO (CONFIG_SYS_HZ / 500)
+#define I2C_BYTE_TO_BB (10)
+
+#endif /* __CA_I2C_H_ */
--
2.7.4
More information about the U-Boot
mailing list