[PATCH 20/27] dm: ppc: MPC8548CDS: add i2c DM support
Biwen Li (OSS)
biwen.li at oss.nxp.com
Fri Apr 17 07:57:52 CEST 2020
> Subject: RE: [PATCH 20/27] dm: ppc: MPC8548CDS: add i2c DM support
>
> >-----Original Message-----
> >From: U-Boot <u-boot-bounces at lists.denx.de> On Behalf Of Biwen Li
> >Sent: Sunday, April 12, 2020 2:24 PM
> >To: Jagdish Gediya <jagdish.gediya at nxp.com>; Priyanka Jain
> ><priyanka.jain at nxp.com>; hs at denx.de; jagan at amarulasolutions.com;
> >aford173 at gmail.com; Alison Wang <alison.wang at nxp.com>;
> >jh80.chung at samsung.com; Pramod Kumar <pramod.kumar_1 at nxp.com>;
> Rajesh
> >Bhagat <rajesh.bhagat at nxp.com>; Ruchika Gupta
> <ruchika.gupta at nxp.com>;
> >olteanv at gmail.com
> >Cc: Xiaobo Xie <xiaobo.xie at nxp.com>; Jiafei Pan <jiafei.pan at nxp.com>;
> >u- boot at lists.denx.de; Z.q. Hou <zhiqiang.hou at nxp.com>; Biwen Li
> ><biwen.li at nxp.com>
> >Subject: [PATCH 20/27] dm: ppc: MPC8548CDS: add i2c DM support
> >
> >From: Biwen Li <biwen.li at nxp.com>
> >
> >This supports i2c DM for board MPC8548CDS
> >
> >Signed-off-by: Biwen Li <biwen.li at nxp.com>
> >---
> > board/freescale/common/sys_eeprom.c | 3 ++-
> > include/configs/MPC8548CDS.h | 9 ++++++++-
> > 2 files changed, 10 insertions(+), 2 deletions(-)
> >
> >diff --git a/board/freescale/common/sys_eeprom.c
> >b/board/freescale/common/sys_eeprom.c
> >index 6f151b0f71..c52af7060e 100644
> >--- a/board/freescale/common/sys_eeprom.c
> >+++ b/board/freescale/common/sys_eeprom.c
> >@@ -589,6 +589,7 @@ unsigned int get_cpu_board_revision(void)
> > u8 major; /* 0x04 Board revision, major */
> > u8 minor; /* 0x05 Board revision, minor */
> > } be;
> >+ int ret;
> >
> > #ifndef CONFIG_DM_I2C
> > i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0,
> >CONFIG_SYS_I2C_EEPROM_ADDR_LEN, @@ -603,7 +604,7 @@ unsigned int
> >get_cpu_board_revision(void) #else
> > ret = i2c_get_chip_for_busnum(0, CONFIG_SYS_I2C_EEPROM_ADDR,
> > CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
> >- &dev)
> >+ &dev);
> Was this compilation error exist before this patch series as well?
>
> > #endif
> > if (!ret)
> > dm_i2c_read(dev, 0, (void *)&be, sizeof(be)); diff --git
> >a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index
> >a68d190f6a..d185926cab 100644
> >--- a/include/configs/MPC8548CDS.h
> >+++ b/include/configs/MPC8548CDS.h
> >@@ -1,6 +1,7 @@
> > /* SPDX-License-Identifier: GPL-2.0+ */
> > /*
> > * Copyright 2004, 2007, 2010-2011 Freescale Semiconductor.
> >+ * Copyright 2020 NXP
> > */
> >
> > /*
> >@@ -304,12 +305,18 @@ extern unsigned long get_clock_freq(void);
> > /*
> > * I2C
> > */
> >+#ifndef CONFIG_DM_I2C
> > #define CONFIG_SYS_I2C
> >+#define CONFIG_SYS_I2C_NOPROBES { {0, 0x69} }
> >+#else
> >+#define CONFIG_SYS_SPD_BUS_NUM 0
> >+#define CONFIG_I2C_SET_DEFAULT_BUS_NUM
> >+#define CONFIG_I2C_DEFAULT_BUS_NUMBER 0
> >+#endif
> > #define CONFIG_SYS_I2C_FSL
> > #define CONFIG_SYS_FSL_I2C_SPEED 400000
> In other similar patches, you were adding this kind of defines under #ifndef
> CONFIG_DM_I2C Why it is different for this patch?
I will move it to #ifndef CONFIG_DM_I2C, and below configs in v2.
#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000
> Priyanka
> > #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
> > #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000
> >-#define CONFIG_SYS_I2C_NOPROBES { {0, 0x69} }
> >
> > /* EEPROM */
> > #define CONFIG_ID_EEPROM
> >--
> >2.17.1
More information about the U-Boot
mailing list