Re: Re： [PATCH] rockchip: rk3328: add rock-pi-e-rk3328_defconfig

[Kever Yang]

Hi

On 2020/4/16 上午11:59, b.l.huang wrote:
>> Does this board dts also upstream to kernel? If yes, please split the
>> dts as a separate patch
>>
>> and add the commit info in the message.
>>
> Temporarily not for upstream to kernel.

Please send the support to mainline kernel first, or else it does not 
help much only support

the board in U-Boot.

>> On 2020/4/13 PM 4:23, banglang.huang wrote:
>>> The ROCK-PI-E is a credit card size SBC based on Rockchip RK3328
>>> Quad-Core ARM Cortex A53.
>>>
>>>       Net - Dual ethernet port, 1 X Gbe, 1 X 100M
>>>       USB - USB 3.0
>>>       DC  - USB-Type C, 5V 2A
>>>       Storage - TF card, eMMC
>>>
>>> Just build u-boot-dtb.bin for Rockpi E board and follow the blow
>>> steps to replace the relevant partition.
>>>
>>>     ./rkbin/tools/loaderimage --pack --uboot u-boot-dtb.bin \
>>>         uboot.img 0x200000 --size 1024 1
>>>     dd if=uboot.img of=/dev/sdcard seek=16384 conv=notrunc
>>
>> RK3328 has enable the TPL support for dram init, could you enable
>> TPL/SPL for this board?
> I am new to rk3328, could you tell me  or give me a hint for how to enable TPL/SPL for rock-pi-e board ?

The TPL is default enabled for RK3328 SOC, you should able to get the 
tpl/u-boot-tpl.bin after build,

you can reference to configs/evb-rk3328_defconfig if anything is not clear.

BTW: please use patman to send the patch so that we can get correct 
patch version in the subject.


Thanks,

- Kever