[v2] configs: ls1046aqds: support distro boot

Biwen Li biwen.li at oss.nxp.com
Fri Apr 17 11:20:57 CEST 2020


From: Biwen Li <biwen.li at nxp.com>

Add support of distro boot for ls1046aqds

Signed-off-by: Biwen Li <biwen.li at nxp.com>
---
Change in v2:
	- correct subject

 include/configs/ls1046a_common.h | 18 +++++++++++++++++-
 include/configs/ls1046aqds.h     | 30 +++++++++++++++++++-----------
 2 files changed, 36 insertions(+), 12 deletions(-)

diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h
index e80c2996ef..91b79650f7 100644
--- a/include/configs/ls1046a_common.h
+++ b/include/configs/ls1046a_common.h
@@ -217,6 +217,10 @@
 #define LS1046A_BOOT_SRC_AND_HDR\
 	"boot_scripts=ls1046afrwy_boot.scr\0"	\
 	"boot_script_hdr=hdr_ls1046afrwy_bs.out\0"
+#elif defined(CONFIG_TARGET_LS1046AQDS)
+#define LS1046A_BOOT_SRC_AND_HDR\
+	"boot_scripts=ls1046aqds_boot.scr\0"	\
+	"boot_script_hdr=hdr_ls1046aqds_bs.out\0"
 #else
 #define LS1046A_BOOT_SRC_AND_HDR\
 	"boot_scripts=ls1046ardb_boot.scr\0"	\
@@ -230,7 +234,7 @@
 	"ramdisk_size=0x2000000\0"		\
 	"bootm_size=0x10000000\0"		\
 	"fdt_addr=0x64f00000\0"                 \
-	"kernel_addr=0x65000000\0"              \
+	"kernel_addr=0x61000000\0"              \
 	"scriptaddr=0x80000000\0"               \
 	"scripthdraddr=0x80080000\0"		\
 	"fdtheader_addr_r=0x80100000\0"         \
@@ -277,6 +281,18 @@
 		"&& sf read $kernelheader_addr_r $kernelheader_start "	\
 		"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 		"bootm $load_addr#$board\0"		\
+	"nand_bootcmd=echo Trying load from nand..;"      \
+		"nand info; nand read $load_addr "         \
+		"$kernel_start $kernel_size; env exists secureboot "	\
+		"&& nand read $kernelheader_addr_r $kernelheader_start "	\
+		"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
+		"bootm $load_addr#$board\0"		\
+	"nor_bootcmd=echo Trying load from nor..;"	\
+		"cp.b $kernel_addr $load_addr "		\
+		"$kernel_size; env exists secureboot "	\
+		"&& cp.b $kernelheader_addr $kernelheader_addr_r "	\
+		"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
+		"bootm $load_addr#$board\0"	\
 	"sd_bootcmd=echo Trying load from SD ..;"	\
 		"mmcinfo; mmc read $load_addr "		\
 		"$kernel_addr_sd $kernel_size_sd && "	\
diff --git a/include/configs/ls1046aqds.h b/include/configs/ls1046aqds.h
index 0b17b1e994..d04ad00e76 100644
--- a/include/configs/ls1046aqds.h
+++ b/include/configs/ls1046aqds.h
@@ -440,19 +440,27 @@ unsigned long get_board_ddr_clk(void);
 
 #undef CONFIG_BOOTCOMMAND
 #ifdef CONFIG_TFABOOT
-#define QSPI_NOR_BOOTCOMMAND		"sf probe && sf read $kernel_load "    \
-					"e0000 f00000 && bootm $kernel_load"
-#define IFC_NOR_BOOTCOMMAND		"cp.b $kernel_start $kernel_load "     \
-					"$kernel_size && bootm $kernel_load"
-#define SD_BOOTCOMMAND		"mmc info; mmc read $kernel_load"     \
-					"$kernel_addr_sd $kernel_size_sd && bootm $kernel_load"
+#define IFC_NAND_BOOTCOMMAND "run distro_bootcmd; run nand_bootcmd; "	\
+			   "env exists secureboot && esbc_halt;;"
+#define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd"	\
+			   "env exists secureboot && esbc_halt;;"
+#define IFC_NOR_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd; "	\
+			   "env exists secureboot && esbc_halt;;"
+#define SD_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; "	\
+			   "env exists secureboot && esbc_halt;;"
 #else
-#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
-#define CONFIG_BOOTCOMMAND		"sf probe && sf read $kernel_load "    \
-					"e0000 f00000 && bootm $kernel_load"
+#if defined(CONFIG_QSPI_BOOT)
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd; "	\
+			   "env exists secureboot && esbc_halt;;"
+#elif defined(CONFIG_NAND_BOOT)
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run nand_bootcmd; "	\
+			   "env exists secureboot && esbc_halt;;"
+#elif defined(CONFIG_SD_BOOT)
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; "	\
+			   "env exists secureboot && esbc_halt;;"
 #else
-#define CONFIG_BOOTCOMMAND		"cp.b $kernel_start $kernel_load "     \
-					"$kernel_size && bootm $kernel_load"
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd; "	\
+			   "env exists secureboot && esbc_halt;;"
 #endif
 #endif
 
-- 
2.17.1



More information about the U-Boot mailing list