[PATCH v10 00/12] Actions S700 SoC support
Masahiro Yamada
masahiroy at kernel.org
Fri Apr 17 13:31:38 CEST 2020
On Fri, Apr 17, 2020 at 6:07 PM André Przywara <andre.przywara at arm.com> wrote:
>
> On 17/04/2020 04:05, Tom Rini wrote:
>
> (adding Masahiro for Kconfig)
>
> > On Mon, Apr 06, 2020 at 05:58:19PM +0530, Amit Singh Tomar wrote:
> >
> >> This adds Cubieboard7[1] support based on Action Semi's S700 SoC[2], It's Quad-core ARMv8 SoC
> >> with Cortex-A53 cores. Peripheral like UART seems to be compatible with S900 SoC(basic support
> >> for it is alreay present in u-boot).
> >>
> >> This series(v10) takes care the commments provided by Mani and patches 04/12, 07/12 and 12/12
> >> has been changed to address those comments.
> >>
> >> Previous series(v9) fixes a Bug that breaks bubblegum96 board boot(reported by Mani). It was
> >> due to fact that driver data read is not proper in the clock driver. There are changes in
> >> patch 06/12 to fix it.
> >>
> >> Series(v8) removes the SoC specific include instead just uses owl-common. For this
> >> patch 01/12 and 09/12 changes a bit.
> >>
> >> Series(v7) fixes a serious Bug that breaks S900, it was there since v5.Thanks to Andre
> >> for pointing it out.
> >>
> >> Series(v6)[3] does following changes:
> >>
> >> * [PATCH v5 06/11] becomes [PATCH v6 03/11]
> >> * [PATCH v5 03/11] becomes [PATCH v6 04/11]
> >> * Introduce a new patch to move defconfig options to Kconfig which is [PATCH v6 10/12]
> >>
> >> Series(v5)[4] just re-orders the patches so that U-BOOT(with bubblegum96_defconfig) builds
> >> after every patch of the series(suggested by Andre).
> >>
> >> S700 support is tested[5] on Cubieboard7-lite board and S900 support is just compiled tested.
> >>
> >> This patch series can be tested using below tree:
> >> https://github.com/Atomar25/u-boot/commits/s700_v10
> >>
> >> [1]: http://www.cubietech.com/product-detail/cubieboard7/
> >> [2]: http://www.actions-semi.com/en/productview.aspx?id=225
> >> [3]: http://u-boot.10912.n7.nabble.com/PATCH-v6-00-12-Actions-S700-SoC-support-td403562.html#a403567
> >> [4]: http://u-boot.10912.n7.nabble.com/PATCH-v5-00-11-Actions-S700-SoC-support-td402752.html#a402762
> >> [5]: https://paste.ubuntu.com/p/TbBtk5dPGS/
> >>
> >> Amit Singh Tomar (12):
> >> arm: actions: Add common framework for Actions Owl Semi SoCs
> >> arm: actions: rename sysmap-s900 to sysmap-owl
> >> serial: actions: add compatible string
> >> arm: dts: sync dts for Action Semi S900
> >> arm: dts: actions: s900: add u-boot specific dtsi file
> >> clk: actions: Add common clock driver
> >> arm: actions: add S700 SoC device tree
> >> arm: dts: actions: s700: add u-boot specific dtsi file
> >> arm: add support Actions Semi S700
> >> actions: Move defconfig options to Kconfig
> >> arm: add Cubieboard7 board support
> >> doc: boards: add Cubieboard7 documentation
> >
> > A few problems. First, "actions: Move defconfig options to Kconfig"
> > breaks a large number of boards including p2371-2180 in one way and
> > libretech_all_h5_cc_h5 (along with lots of other sunxi platforms) in a
> > different but related way.
>
> (Masahiro: it's about this patch:
> https://lists.denx.de/pipermail/u-boot/2020-April/405672.html)
>
> Tom, many thanks for the heads up, I can confirm the problem, but am
> totally clueless as of *why* this happens:
> The changes in this patch add options to arch/arm/mach-owl/Kconfig, and
> are totally contained inside an "if ARCH_OWL .. endif" clamp, so how
> could this even affect other platforms (which are clearly not defining
> ARCH_OWL)?
>
scripts/diffconfig in Linux is useful to
see how the resulted .config has changed.
This is the before/after diff of p2371-2180.
-BOOTCOMMAND "run distro_bootcmd"
-BOOTP_PXE y
-BOOTP_PXE_CLIENTARCH 0x16
-CMD_EXT4_WRITE y
-EXT4_WRITE y
-FAT_WRITE y
-FS_FAT_MAX_CLUSTSIZE 65536
-MENU y
CMD_DHCP y -> n
CMD_EXT2 y -> n
CMD_EXT4 y -> n
CMD_FAT y -> n
CMD_FS_GENERIC y -> n
CMD_MII y -> n
CMD_PART y -> n
CMD_PING y -> n
CMD_PXE y -> n
CMD_SYSBOOT y -> n
DISTRO_DEFAULTS y -> n
DOS_PARTITION y -> n
ENV_VARS_UBOOT_CONFIG y -> n
FS_EXT4 y -> n
FS_FAT y -> n
HUSH_PARSER y -> n
SUPPORT_RAW_INITRD y -> n
USB_STORAGE y -> n
USE_BOOTCOMMAND y -> n
It turned off DISTRO_DEFAULTS.
The menuconfig help shows
it now depends on 'ARM && ARCH_OWL'.
Presumably Kconfig was confused
by DISTRO_DEFAULTS being defined
multiple times.
--
Best Regards
Masahiro Yamada
More information about the U-Boot
mailing list