[PATCH 1/5] wandboard: Fix detection for mx6q/mx6dl revD1 revariants
Heiko Schocher
hs at denx.de
Fri Apr 17 16:50:25 CEST 2020
Hello Fabio,
Am 17.04.2020 um 14:30 schrieb Fabio Estevam:
> Hi Heiko,
>
> On Fri, Apr 17, 2020 at 9:00 AM Derek Atkins <derek at ihtfp.com> wrote:
>>
>> Hi,
>> Let me know if you want me to test this on my imx6q d1
>
> Derek confirmed that v2 worked on his imx6q wandboard revD1 and I have
> just submitted v2 to the list.
>
> Hopefully it will also work on your imx6dl wandboard revD1.
Yes, can confirm this, see log attached.
Thanks for your efforts!
bye,
Heiko
hs at lab-1:tbot-tbot2go [wandboard-devel-messe] $ tbot @argswandboardlab1 wandboard_ub_check_version
tbot starting ...
├─Flags:
│ 'lab-1-build'
├─Calling wandboard_ub_check_version ...
│ ├─[local] ssh -o BatchMode=yes -i /home/hs/.ssh/id_rsa -p 22 hs at 192.168.1.109
│ ├─[lab1] strings /var/lib/tftpboot/wandboard/tbot/u-boot.bin | grep --color=never "U-Boot 2"
│ │ ## U-Boot 2020.04-tbot-00375-g946d9a0974 (Apr 17 2020 - 16:20:27 +0200)
│ ├─found in image U-Boot version U-Boot 2020.04-tbot-00375-g946d9a0974 (Apr 17 2020 - 16:20:27 +0200)
│ ├─[lab1] strings /var/lib/tftpboot/wandboard/tbot/SPL | grep --color=never "U-Boot SPL"
│ │ ## U-Boot SPL 2020.04-tbot-00375-g946d9a0974 (Apr 17 2020 - 16:20:27 +0200)
│ ├─found in image U-Boot SPL version U-Boot SPL 2020.04-tbot-00375-g946d9a0974 (Apr 17 2020 -
16:20:27 +0200)
│ ├─[local] ssh -o BatchMode=yes -i /home/hs/.ssh/id_rsa -p 22 hs at 192.168.1.109
│ ├─[lab1] kermit /home/hs/kermrc_wandboard
│ ├─POWERON (wandboard)
│ ├─[lab1] sudo sispmctl -D 01:01:56:a2:f1 -o 3
│ │ ## Accessing Gembird #0 USB device 021
│ │ ## Switched outlet 3 on
│ ├─UBOOT (wandboard-uboot)
│ │ <> Connecting to
/dev/serial/by-id/usb-Prolific_Technology_Inc._USB-Serial_Controller_D-if00-port0, speed 115200
│ │ <> Escape character: Ctrl-\ (ASCII 28, FS): enabled
│ │ <> Type the escape character followed by C to get back,
│ │ <> or followed by ? to see other options.
│ │ <> ----------------------------------------------------
│ │ <>
│ │ <> U-Boot SPL 2020.04-tbot-00375-g946d9a0974 (Apr 17 2020 - 16:20:27 +0200)
│ │ <> Trying to boot from MMC1
│ │ <>
│ │ <>
│ │ <> U-Boot 2020.04-tbot-00375-g946d9a0974 (Apr 17 2020 - 16:20:27 +0200)
│ │ <>
│ │ <> CPU: Freescale i.MX6DL rev1.3 at 792 MHz
│ │ <> Reset cause: POR
│ │ <> DRAM: 1 GiB
│ │ <> PMIC: PFUZE100 ID=0x10
│ │ <> MMC: FSL_SDHC: 2, FSL_SDHC: 1, FSL_SDHC: 0
│ │ <> Loading Environment from MMC... *** Warning - bad CRC, using default environment
│ │ <>
│ │ <> No panel detected: default to HDMI
│ │ <> Display: HDMI (1024x768)
│ │ <> In: serial
│ │ <> Out: serial
│ │ <> Err: serial
│ │ <> Board: Wandboard rev D1
│ │ <> Net:
│ │ <> Warning: ethernet at 2188000 using MAC address from ROM
│ │ <> eth0: ethernet at 2188000
│ │ <> Hit any key to stop autoboot: 0
│ │ <> =>
│ ├─found U-Boot SPL version U-Boot SPL 2020.04-tbot-00375-g946d9a0974 (Apr 17 2020 - 16:20:27
+0200) installed
│ ├─found U-Boot version U-Boot 2020.04-tbot-00375-g946d9a0974 (Apr 17 2020 - 16:20:27 +0200)
installed
│ ├─POWEROFF (wandboard)
│ ├─[lab1] sudo sispmctl -D 01:01:56:a2:f1 -f 3
│ │ ## Accessing Gembird #0 USB device 021
│ │ ## Switched outlet 3 off
│ └─Done. (14.212s)
├─────────────────────────────────────────
├─Log written to '/home/hs/data/Entwicklung/wandboard/tbot-tbot2go/log/lab1-wandboard-0040.json'
└─SUCCESS (14.340s)
hs at lab-1:tbot-tbot2go [wandboard-devel-messe] $
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-52 Fax: +49-8142-66989-80 Email: hs at denx.de
More information about the U-Boot
mailing list