A64-Olinuxino-eMMC no USB
Philip Rinn
rinni at inventati.org
Fri Apr 17 17:00:20 CEST 2020
Hi,
USB is not working on my Olimex A64-Olinuxino-1Ge4GW Rev. D, no matter if I use
the u-boot variant with or without eMMC (but that's no surprise). I use the
version provided by Debian, 2020.04+dfsg-1 withe image provided by Armbian it
didn't work either.
I attached boot logs with and without attached USB key.
In both cases one gets an "EHCI failed to shut down host controller." while
loading the kernels fdt.
The error message with attached USB key is:
scanning bus usb at 1c1b400 for devices... ERROR: USB-error: DEVICENOTRESPONDING:
Device did not respond to token (IN) or did
not provide a handshake (OUT) (5)
ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or
did
not provide a handshake (OUT) (5)
USB device not accepting new address (error=20)
After booting Linux there is still no USB available, but that's a different bug I
guess ;-). I attached the dmesg log anyway.
I also filed a Debian bug report about the issue:
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=956923.
Best,
Philip
-------------- next part --------------
U-Boot SPL 2020.04+dfsg-1 (Apr 15 2020 - 00:24:39 +0000)
DRAM: 1024 MiB
Trying to boot from MMC1
NOTICE: BL31: v2.2(debug):
NOTICE: BL31: Built : 15:34:34, Apr 10 2020
NOTICE: BL31: Detected Allwinner A64/H64/R18 SoC (1689)
NOTICE: BL31: Found U-Boot DTB at 0x4090fd0, model: Olimex A64-Olinuxino-eMMC
INFO: ARM GICv2 driver initialized
INFO: Configuring SPC Controller
NOTICE: BL31: PMIC: Detected AXP803 on RSB.
INFO: PMIC: AXP803: Enabling DRIVEVBUS
INFO: PMIC: AXP803: dcdc1 voltage: 3.300V
INFO: PMIC: AXP803: dcdc5 voltage: 1.360V
INFO: PMIC: AXP803: dcdc6 voltage: 1.100V
INFO: PMIC: AXP803: dldo1 voltage: 3.300V
INFO: BL31: Platform setup done
INFO: BL31: Initializing runtime services
INFO: BL31: cortex_a53: CPU workaround for 843419 was applied
INFO: BL31: cortex_a53: CPU workaround for 855873 was applied
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x4a000000
INFO: SPSR = 0x3c9
U-Boot 2020.04+dfsg-1 (Apr 15 2020 - 00:24:39 +0000) Allwinner Technology
CPU: Allwinner A64 (SUN50I)
Model: Olimex A64-Olinuxino-eMMC
DRAM: 1 GiB
MMC: Device 'mmc at 1c11000': seq 1 is in use by 'mmc at 1c10000'
mmc at 1c0f000: 0, mmc at 1c10000: 2, mmc at 1c11000: 1
Loading Environment from FAT... Unable to use mmc 1:1... In: serial
Out: serial
Err: serial
Net: phy interface7
eth0: ethernet at 1c30000
starting USB...
Bus usb at 1c1a000: USB EHCI 1.00
Bus usb at 1c1a400: USB OHCI 1.0
Bus usb at 1c1b000: USB EHCI 1.00
Bus usb at 1c1b400: USB OHCI 1.0
scanning bus usb at 1c1a000 for devices... 1 USB Device(s) found
scanning bus usb at 1c1a400 for devices... 1 USB Device(s) found
scanning bus usb at 1c1b000 for devices... 1 USB Device(s) found
scanning bus usb at 1c1b400 for devices... ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or did
not provide a handshake (OUT) (5)
ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or did
not provide a handshake (OUT) (5)
USB device not accepting new address (error=20)
1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot/boot.scr
3012 bytes read in 3 ms (980.5 KiB/s)
## Executing script at 4fc00000
U-boot loaded from SD
Boot script loaded from mmc
175 bytes read in 2 ms (85 KiB/s)
24201 bytes read in 8 ms (2.9 MiB/s)
29057066 bytes read in 1247 ms (22.2 MiB/s)
21069680 bytes read in 905 ms (22.2 MiB/s)
## Loading init Ramdisk from Legacy Image at 4fe00000 ...
Image Name: uInitrd
Image Type: AArch64 Linux RAMDisk Image (uncompressed)
Data Size: 29057002 Bytes = 27.7 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 4fa00000
Booting using the fdt blob at 0x4fa00000
EHCI failed to shut down host controller.
Loading Ramdisk to 4844a000, end 49ffffea ... OK
Loading Device Tree to 00000000483db000, end 0000000048449fff ... OK
Starting kernel ...
-------------- next part --------------
U-Boot SPL 2020.04+dfsg-1 (Apr 15 2020 - 00:24:39 +0000)
DRAM: 1024 MiB
Trying to boot from MMC1
NOTICE: BL31: v2.2(debug):
NOTICE: BL31: Built : 15:34:34, Apr 10 2020
NOTICE: BL31: Detected Allwinner A64/H64/R18 SoC (1689)
NOTICE: BL31: Found U-Boot DTB at 0x4090fd0, model: Olimex A64-Olinuxino-eMMC
INFO: ARM GICv2 driver initialized
INFO: Configuring SPC Controller
NOTICE: BL31: PMIC: Detected AXP803 on RSB.
INFO: PMIC: AXP803: Enabling DRIVEVBUS
INFO: PMIC: AXP803: dcdc1 voltage: 3.300V
INFO: PMIC: AXP803: dcdc5 voltage: 1.360V
INFO: PMIC: AXP803: dcdc6 voltage: 1.100V
INFO: PMIC: AXP803: dldo1 voltage: 3.300V
INFO: BL31: Platform setup done
INFO: BL31: Initializing runtime services
INFO: BL31: cortex_a53: CPU workaround for 843419 was applied
INFO: BL31: cortex_a53: CPU workaround for 855873 was applied
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x4a000000
INFO: SPSR = 0x3c9
U-Boot 2020.04+dfsg-1 (Apr 15 2020 - 00:24:39 +0000) Allwinner Technology
CPU: Allwinner A64 (SUN50I)
Model: Olimex A64-Olinuxino-eMMC
DRAM: 1 GiB
MMC: Device 'mmc at 1c11000': seq 1 is in use by 'mmc at 1c10000'
mmc at 1c0f000: 0, mmc at 1c10000: 2, mmc at 1c11000: 1
Loading Environment from FAT... Unable to use mmc 1:1... In: serial
Out: serial
Err: serial
Net: phy interface7
eth0: ethernet at 1c30000
starting USB...
Bus usb at 1c1a000: USB EHCI 1.00
Bus usb at 1c1a400: USB OHCI 1.0
Bus usb at 1c1b000: USB EHCI 1.00
Bus usb at 1c1b400: USB OHCI 1.0
scanning bus usb at 1c1a000 for devices... 1 USB Device(s) found
scanning bus usb at 1c1a400 for devices... 1 USB Device(s) found
scanning bus usb at 1c1b000 for devices... 1 USB Device(s) found
scanning bus usb at 1c1b400 for devices... 1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot/boot.scr
3012 bytes read in 2 ms (1.4 MiB/s)
## Executing script at 4fc00000
U-boot loaded from SD
Boot script loaded from mmc
175 bytes read in 2 ms (85 KiB/s)
24201 bytes read in 7 ms (3.3 MiB/s)
29057066 bytes read in 1246 ms (22.2 MiB/s)
21069680 bytes read in 905 ms (22.2 MiB/s)
## Loading init Ramdisk from Legacy Image at 4fe00000 ...
Image Name: uInitrd
Image Type: AArch64 Linux RAMDisk Image (uncompressed)
Data Size: 29057002 Bytes = 27.7 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 4fa00000
Booting using the fdt blob at 0x4fa00000
EHCI failed to shut down host controller.
Loading Ramdisk to 4844a000, end 49ffffea ... OK
Loading Device Tree to 00000000483db000, end 0000000048449fff ... OK
Starting kernel ...
-------------- next part --------------
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 5.5.0-1-arm64 (debian-kernel at lists.debian.org) (gcc version 9.3.0 (Debian 9.3.0-8)) #1 SMP Debian 5.5.13-2 (2020-03-30)
[ 0.000000] Machine model: Olimex A64-Olinuxino-eMMC
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: Reserved 64 MiB at 0x000000007c000000
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x7bdda100-0x7bddbfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] On node 0 totalpages: 262144
[ 0.000000] DMA zone: 4096 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 262144 pages, LIFO batch:63
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.1
[ 0.000000] percpu: Embedded 32 pages/cpu s93656 r8192 d29224 u131072
[ 0.000000] pcpu-alloc: s93656 r8192 d29224 u131072 alloc=32*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] CPU features: detected: ARM erratum 843419
[ 0.000000] Speculative Store Bypass Disable mitigation not required
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 258048
[ 0.000000] Policy zone: DMA
[ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rootwait rootfstype=ext4 console=ttyS0,115200 console=tty1 consoleblank=0 loglevel=1 ubootpart=314cb6d6-01 usb-storage.quirks=
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 912840K/1048576K available (9980K kernel code, 1758K rwdata, 3684K rodata, 5120K init, 552K bss, 70200K reserved, 65536K cma-reserved)
[ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x44/0x5c0 with crng_init=0
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 35767 entries in 140 pages
[ 0.000000] ftrace: allocated 140 pages with 3 groups
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] arch_timer: Enabling global workaround for Allwinner erratum UNKNOWN1
[ 0.000000] arch_timer: CPU0: Trapping CNTVCT access
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.000750] Console: colour dummy device 80x25
[ 0.000764] printk: console [tty1] enabled
[ 0.000882] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.000892] pid_max: default: 32768 minimum: 301
[ 0.001048] LSM: Security Framework initializing
[ 0.001078] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.001171] AppArmor: AppArmor initialized
[ 0.001179] TOMOYO Linux initialized
[ 0.001265] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.001277] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.003167] ASID allocator initialised with 32768 entries
[ 0.003284] rcu: Hierarchical SRCU implementation.
[ 0.005734] EFI services will not be available.
[ 0.006190] smp: Bringing up secondary CPUs ...
[ 0.007610] Detected VIPT I-cache on CPU1
[ 0.007664] arch_timer: CPU1: Trapping CNTVCT access
[ 0.007676] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.008829] Detected VIPT I-cache on CPU2
[ 0.008861] arch_timer: CPU2: Trapping CNTVCT access
[ 0.008871] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.009819] Detected VIPT I-cache on CPU3
[ 0.009849] arch_timer: CPU3: Trapping CNTVCT access
[ 0.009859] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.009964] smp: Brought up 1 node, 4 CPUs
[ 0.009969] SMP: Total of 4 processors activated.
[ 0.009975] CPU features: detected: 32-bit EL0 Support
[ 0.009979] CPU features: detected: CRC32 instructions
[ 0.023423] CPU: All CPU(s) started at EL2
[ 0.023472] alternatives: patching kernel code
[ 0.025288] devtmpfs: initialized
[ 0.031285] Registered cp15_barrier emulation handler
[ 0.031296] Registered setend emulation handler
[ 0.031305] KASLR disabled due to lack of seed
[ 0.031698] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.031715] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.034345] pinctrl core: initialized pinctrl subsystem
[ 0.035283] thermal_sys: Registered thermal governor 'fair_share'
[ 0.035287] thermal_sys: Registered thermal governor 'step_wise'
[ 0.035452] DMI not present or invalid.
[ 0.035872] NET: Registered protocol family 16
[ 0.037799] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.037817] audit: initializing netlink subsys (disabled)
[ 0.037982] audit: type=2000 audit(0.036:1): state=initialized audit_enabled=0 res=1
[ 0.039263] cpuidle: using governor ladder
[ 0.039285] cpuidle: using governor menu
[ 0.039500] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.039937] Serial: AMBA PL011 UART driver
[ 0.054692] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.054702] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.054707] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.054712] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.891607] ACPI: Interpreter disabled.
[ 0.891835] iommu: Default domain type: Translated
[ 0.892074] vgaarb: loaded
[ 0.892434] EDAC MC: Ver: 3.0.0
[ 0.893997] clocksource: Switched to clocksource arch_sys_counter
[ 0.961574] VFS: Disk quotas dquot_6.6.0
[ 0.961657] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.962454] AppArmor: AppArmor Filesystem Enabled
[ 0.962695] pnp: PnP ACPI: disabled
[ 0.970770] NET: Registered protocol family 2
[ 0.971389] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
[ 0.971417] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.971498] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.971649] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.971780] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.971819] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.972027] NET: Registered protocol family 1
[ 0.972051] NET: Registered protocol family 44
[ 0.972063] PCI: CLS 0 bytes, default 64
[ 0.972276] Trying to unpack rootfs image as initramfs...
[ 2.860328] Freeing initrd memory: 28372K
[ 2.861295] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 2.861577] kvm [1]: IPA Size Limit: 40bits
[ 2.862303] kvm [1]: vgic interrupt IRQ1
[ 2.862452] kvm [1]: Hyp mode initialized successfully
[ 2.864218] Initialise system trusted keyrings
[ 2.864263] Key type blacklist registered
[ 2.864481] workingset: timestamp_bits=44 max_order=18 bucket_order=0
[ 2.871704] zbud: loaded
[ 2.872709] Platform Keyring initialized
[ 2.872721] Key type asymmetric registered
[ 2.872725] Asymmetric key parser 'x509' registered
[ 2.872761] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 2.873001] io scheduler mq-deadline registered
[ 2.874085] sun50i-de2-bus 1000000.bus: Error couldn't map SRAM to device
[ 2.879350] sun50i-a64-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver
[ 2.880390] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 2.888203] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.890149] Serial: AMBA driver
[ 2.890413] msm_serial: driver initialized
[ 2.892534] mousedev: PS/2 mouse device common for all mice
[ 2.893689] sun6i-rtc 1f00000.rtc: registered as rtc0
[ 2.893696] sun6i-rtc 1f00000.rtc: RTC enabled
[ 2.894812] sun50i-a64-r-pinctrl 1f02c00.pinctrl: 1f02c00.pinctrl supply vcc-pl not found, using dummy regulator
[ 2.895216] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.896289] drop_monitor: Initializing network drop monitor service
[ 2.897147] NET: Registered protocol family 10
[ 2.957890] Segment Routing with IPv6
[ 2.958046] mip6: Mobile IPv6
[ 2.958057] NET: Registered protocol family 17
[ 2.958274] mpls_gso: MPLS GSO support
[ 2.958838] registered taskstats version 1
[ 2.958845] Loading compiled-in X.509 certificates
[ 3.157336] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 3.157437] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'
[ 3.157578] zswap: loaded using pool lzo/zbud
[ 3.157900] Key type ._fscrypt registered
[ 3.157904] Key type .fscrypt registered
[ 3.158014] AppArmor: AppArmor sha1 policy hashing enabled
[ 3.170913] sunxi-rsb 1f03400.rsb: RSB running at 3000000 Hz
[ 3.175372] sun50i-a64-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[ 3.175894] sun50i-a64-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pb not found, using dummy regulator
[ 3.176398] printk: console [ttyS0] disabled
[ 3.196984] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 27, base_baud = 1500000) is a U6_16550A
[ 3.197039] printk: console [ttyS0] enabled
[ 3.197518] sun6i-rtc 1f00000.rtc: setting system clock to 2020-04-16T18:54:48 UTC (1587063288)
[ 3.205171] Freeing unused kernel memory: 5120K
[ 3.230506] Checked W+X mappings: passed, no W+X pages found
[ 3.230522] Run /init as init process
[ 3.950421] sun50i-a64-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pg not found, using dummy regulator
[ 3.983352] sun50i-a64-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pf not found, using dummy regulator
[ 3.984066] sun50i-a64-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pc not found, using dummy regulator
[ 4.037813] sun50i-a64-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-ph not found, using dummy regulator
[ 4.038221] sun4i-usb-phy 1c19400.phy: Couldn't get regulator usb0_vbus... Deferring probe
[ 4.075754] usbcore: registered new interface driver usbfs
[ 4.075813] usbcore: registered new interface driver hub
[ 4.075965] usbcore: registered new device driver usb
[ 4.104181] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.108002] ehci-platform: EHCI generic platform driver
[ 4.108405] ehci-platform 1c1a000.usb: EHCI Host Controller
[ 4.108436] ehci-platform 1c1a000.usb: new USB bus registered, assigned bus number 1
[ 4.108604] ehci-platform 1c1a000.usb: irq 20, io mem 0x01c1a000
[ 4.122099] ehci-platform 1c1a000.usb: USB 2.0 started, EHCI 1.00
[ 4.122511] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.05
[ 4.122520] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.122526] usb usb1: Product: EHCI Host Controller
[ 4.122532] usb usb1: Manufacturer: Linux 5.5.0-1-arm64 ehci_hcd
[ 4.122537] usb usb1: SerialNumber: 1c1a000.usb
[ 4.123203] hub 1-0:1.0: USB hub found
[ 4.123248] hub 1-0:1.0: 1 port detected
[ 4.125205] pps_core: LinuxPPS API ver. 1 registered
[ 4.125213] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti at linux.it>
[ 4.125314] sun50i-a64-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pf not found, using dummy regulator
[ 4.127508] sun50i-a64-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pc not found, using dummy regulator
[ 4.128614] sun50i-a64-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-ph not found, using dummy regulator
[ 4.128993] sun4i-usb-phy 1c19400.phy: Couldn't get regulator usb0_vbus... Deferring probe
[ 4.145345] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.148837] ohci-platform: OHCI generic platform driver
[ 4.149192] ohci-platform 1c1a400.usb: Generic Platform OHCI controller
[ 4.149219] ohci-platform 1c1a400.usb: new USB bus registered, assigned bus number 2
[ 4.149400] ohci-platform 1c1a400.usb: irq 21, io mem 0x01c1a400
[ 4.152104] PTP clock support registered
[ 4.178824] libphy: Fixed MDIO Bus: probed
[ 4.191677] axp20x-rsb sunxi-rsb-3a3: AXP20x variant AXP803 found
[ 4.203365] axp20x-rsb sunxi-rsb-3a3: AXP20X driver loaded
[ 4.205038] sun50i-a64-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pf not found, using dummy regulator
[ 4.207096] sun50i-a64-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pc not found, using dummy regulator
[ 4.208144] sun50i-a64-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-ph not found, using dummy regulator
[ 4.208630] sun4i-usb-phy 1c19400.phy: Couldn't get regulator usb0_vbus... Deferring probe
[ 4.210409] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.05
[ 4.210422] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.210428] usb usb2: Product: Generic Platform OHCI controller
[ 4.210434] usb usb2: Manufacturer: Linux 5.5.0-1-arm64 ohci_hcd
[ 4.210440] usb usb2: SerialNumber: 1c1a400.usb
[ 4.211088] hub 2-0:1.0: USB hub found
[ 4.211126] hub 2-0:1.0: 1 port detected
[ 4.219735] sun50i-a64-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pf not found, using dummy regulator
[ 4.222111] sun50i-a64-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pc not found, using dummy regulator
[ 4.223352] sun50i-a64-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-ph not found, using dummy regulator
[ 4.223769] sun4i-usb-phy 1c19400.phy: Couldn't get regulator usb0_vbus... Deferring probe
[ 4.234571] sun50i-a64-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pd not found, using dummy regulator
[ 4.234802] dwmac-sun8i 1c30000.ethernet: IRQ eth_wake_irq not found
[ 4.234810] dwmac-sun8i 1c30000.ethernet: IRQ eth_lpi not found
[ 4.234928] dwmac-sun8i 1c30000.ethernet: PTP uses main clock
[ 4.278408] dcdc1: supplied by regulator-dummy
[ 4.278933] dcdc2: supplied by regulator-dummy
[ 4.279367] dcdc4: supplied by regulator-dummy
[ 4.279713] dcdc5: supplied by regulator-dummy
[ 4.280072] dcdc6: supplied by regulator-dummy
[ 4.280427] dc1sw: supplied by regulator-dummy
[ 4.280700] aldo1: supplied by regulator-dummy
[ 4.281903] aldo2: supplied by regulator-dummy
[ 4.283062] aldo3: supplied by regulator-dummy
[ 4.284029] dldo1: supplied by regulator-dummy
[ 4.284462] dldo2: supplied by regulator-dummy
[ 4.285143] dldo3: supplied by regulator-dummy
[ 4.285862] dldo4: supplied by regulator-dummy
[ 4.286681] eldo1: supplied by regulator-dummy
[ 4.287976] eldo2: supplied by regulator-dummy
[ 4.288937] eldo3: supplied by regulator-dummy
[ 4.289401] fldo1: supplied by regulator-dummy
[ 4.290390] fldo2: supplied by regulator-dummy
[ 4.290824] rtc-ldo: supplied by regulator-dummy
[ 4.291116] ldo-io0: supplied by regulator-dummy
[ 4.291935] ldo-io1: supplied by regulator-dummy
[ 4.292609] drivevbus: supplied by regulator-dummy
[ 4.295567] sun50i-a64-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pf not found, using dummy regulator
[ 4.298830] sunxi-mmc 1c0f000.mmc: Got CD GPIO
[ 4.300896] axp20x-gpio axp20x-gpio: DMA mask not set
[ 4.301577] axp20x-gpio axp20x-gpio: AXP209 pinctrl and GPIO driver loaded
[ 4.322200] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
[ 4.323937] sunxi-mmc 1c10000.mmc: allocated mmc-pwrseq
[ 4.346098] sunxi-mmc 1c10000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
[ 4.347126] sun50i-a64-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pc not found, using dummy regulator
[ 4.364518] mmc0: new high speed SDHC card at address aaaa
[ 4.367823] mmc1: new high speed SDIO card at address 0001
[ 4.368927] mmcblk0: mmc0:aaaa SC16G 14.8 GiB
[ 4.371002] cryptd: max_cpu_qlen set to 1000
[ 4.373342] mmcblk0: p1
[ 4.373629] sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode
[ 4.374731] sun50i-a64-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-ph not found, using dummy regulator
[ 4.377047] usb_phy_generic usb_phy_generic.1.auto: usb_phy_generic.1.auto supply vcc not found, using dummy regulator
[ 4.378148] musb-hdrc musb-hdrc.2.auto: MUSB HDRC host driver
[ 4.378180] musb-hdrc musb-hdrc.2.auto: new USB bus registered, assigned bus number 3
[ 4.379559] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.05
[ 4.379577] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.379584] usb usb3: Product: MUSB HDRC host driver
[ 4.379589] usb usb3: Manufacturer: Linux 5.5.0-1-arm64 musb-hcd
[ 4.379595] usb usb3: SerialNumber: musb-hdrc.2.auto
[ 4.380354] hub 3-0:1.0: USB hub found
[ 4.380408] hub 3-0:1.0: 1 port detected
[ 4.382968] sun50i-a64-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pd not found, using dummy regulator
[ 4.383188] dwmac-sun8i 1c30000.ethernet: IRQ eth_wake_irq not found
[ 4.383197] dwmac-sun8i 1c30000.ethernet: IRQ eth_lpi not found
[ 4.383311] dwmac-sun8i 1c30000.ethernet: PTP uses main clock
[ 4.383893] dwmac-sun8i 1c30000.ethernet: Current syscon value is not the default 1806 (expect 0)
[ 4.383914] dwmac-sun8i 1c30000.ethernet: No HW DMA feature register supported
[ 4.383919] dwmac-sun8i 1c30000.ethernet: RX Checksum Offload Engine supported
[ 4.383925] dwmac-sun8i 1c30000.ethernet: COE Type 2
[ 4.383930] dwmac-sun8i 1c30000.ethernet: TX Checksum insertion supported
[ 4.383936] dwmac-sun8i 1c30000.ethernet: Normal descriptors
[ 4.383941] dwmac-sun8i 1c30000.ethernet: Chain mode enabled
[ 4.384192] libphy: stmmac: probed
[ 4.402856] ohci-platform 1c1b400.usb: Generic Platform OHCI controller
[ 4.402895] ohci-platform 1c1b400.usb: new USB bus registered, assigned bus number 4
[ 4.403119] ohci-platform 1c1b400.usb: irq 23, io mem 0x01c1b400
[ 4.454950] random: fast init done
[ 4.459166] mmc2: new DDR MMC card at address 0001
[ 4.460378] mmcblk2: mmc2:0001 P1XXXX 3.60 GiB
[ 4.460852] mmcblk2boot0: mmc2:0001 P1XXXX partition 1 16.0 MiB
[ 4.461360] mmcblk2boot1: mmc2:0001 P1XXXX partition 2 16.0 MiB
[ 4.467378] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.05
[ 4.467392] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.467398] usb usb4: Product: Generic Platform OHCI controller
[ 4.467404] usb usb4: Manufacturer: Linux 5.5.0-1-arm64 ohci_hcd
[ 4.467410] usb usb4: SerialNumber: 1c1b400.usb
[ 4.467680] mmcblk2: p1
[ 4.469452] hub 4-0:1.0: USB hub found
[ 4.470789] hub 4-0:1.0: 1 port detected
[ 4.472332] ehci-platform 1c1b000.usb: EHCI Host Controller
[ 4.473801] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 5
[ 4.473965] ehci-platform 1c1b000.usb: irq 22, io mem 0x01c1b000
[ 4.486072] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00
[ 4.486432] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.05
[ 4.486441] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.486447] usb usb5: Product: EHCI Host Controller
[ 4.486453] usb usb5: Manufacturer: Linux 5.5.0-1-arm64 ehci_hcd
[ 4.486459] usb usb5: SerialNumber: 1c1b000.usb
[ 4.487181] hub 5-0:1.0: USB hub found
[ 4.487226] hub 5-0:1.0: 1 port detected
[ 4.872233] dwmac-sun8i 1c30000.ethernet eth0: PHY [stmmac-0:01] driver [Micrel KSZ9031 Gigabit PHY]
[ 4.874279] dwmac-sun8i 1c30000.ethernet eth0: No Safety Features support found
[ 4.874292] dwmac-sun8i 1c30000.ethernet eth0: No MAC Management Counters available
[ 4.874300] dwmac-sun8i 1c30000.ethernet eth0: PTP not supported by HW
[ 4.874313] dwmac-sun8i 1c30000.ethernet eth0: configuring for phy/rgmii link mode
[ 5.158016] usb 4-1: new low-speed USB device number 2 using ohci-platform
[ 5.350010] usb 4-1: device descriptor read/64, error -62
[ 5.650016] usb 4-1: device descriptor read/64, error -62
[ 5.946023] usb 4-1: new low-speed USB device number 3 using ohci-platform
[ 6.138013] usb 4-1: device descriptor read/64, error -62
[ 6.438009] usb 4-1: device descriptor read/64, error -62
[ 6.546047] usb usb4-port1: attempt power cycle
[ 7.050030] usb 4-1: new low-speed USB device number 4 using ohci-platform
[ 7.466009] usb 4-1: device not accepting address 4, error -62
[ 7.654010] usb 4-1: new low-speed USB device number 5 using ohci-platform
[ 8.070032] usb 4-1: device not accepting address 5, error -62
[ 8.070125] usb usb4-port1: unable to enumerate USB device
[ 33.758067] vcc-hdmi: disabling
[ 33.758175] usb0-vbus: disabling
[ 36.054325] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[ 36.325059] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 36.947689] systemd[1]: Inserted module 'autofs4'
[ 37.015965] systemd[1]: systemd 245.4-4 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 37.016571] systemd[1]: Detected architecture arm64.
[ 37.180598] systemd[1]: Set hostname to <inventati>.
[ 37.730912] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
[ 37.847582] random: systemd: uninitialized urandom read (16 bytes read)
[ 37.855453] systemd[1]: Created slice system-getty.slice.
[ 37.855902] random: systemd: uninitialized urandom read (16 bytes read)
[ 37.857224] systemd[1]: Created slice system-modprobe.slice.
[ 37.857443] random: systemd: uninitialized urandom read (16 bytes read)
[ 37.858909] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 37.860699] systemd[1]: Created slice User and Session Slice.
[ 37.861232] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 37.861642] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 37.862903] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 37.863244] systemd[1]: Reached target Local Encrypted Volumes.
[ 37.863550] systemd[1]: Reached target Paths.
[ 37.863753] systemd[1]: Reached target Remote File Systems.
[ 37.863934] systemd[1]: Reached target Slices.
[ 37.864142] systemd[1]: Reached target Swap.
[ 37.864969] systemd[1]: Listening on Syslog Socket.
[ 37.865578] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 37.866025] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 37.867032] systemd[1]: Listening on Journal Audit Socket.
[ 37.867661] systemd[1]: Listening on Journal Socket (/dev/log).
[ 37.868362] systemd[1]: Listening on Journal Socket.
[ 37.869310] systemd[1]: Listening on Network Service Netlink Socket.
[ 37.870047] systemd[1]: Listening on udev Control Socket.
[ 37.870587] systemd[1]: Listening on udev Kernel Socket.
[ 37.875794] systemd[1]: Mounting Huge Pages File System...
[ 37.881859] systemd[1]: Mounting POSIX Message Queue File System...
[ 37.888058] systemd[1]: Mounting Kernel Debug File System...
[ 37.894820] systemd[1]: Mounting Kernel Trace File System...
[ 37.901637] systemd[1]: Starting Set the console keyboard layout...
[ 37.908910] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 37.915805] systemd[1]: Starting Load Kernel Module drm...
[ 37.936328] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 37.942735] systemd[1]: Starting File System Check on Root Device...
[ 37.950944] systemd[1]: Starting Journal Service...
[ 37.970219] systemd[1]: Starting Load Kernel Modules...
[ 37.976662] systemd[1]: Starting udev Coldplug all Devices...
[ 37.992223] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 38.063976] systemd[1]: Mounted Huge Pages File System.
[ 38.064979] systemd[1]: Mounted POSIX Message Queue File System.
[ 38.065902] systemd[1]: Mounted Kernel Debug File System.
[ 38.066927] systemd[1]: Mounted Kernel Trace File System.
[ 38.077134] systemd[1]: Finished Set the console keyboard layout.
[ 38.079524] systemd[1]: modprobe at drm.service: Succeeded.
[ 38.081432] systemd[1]: Finished Load Kernel Module drm.
[ 38.090270] systemd[1]: Started File System Check Daemon to report status.
[ 38.124638] Asymmetric key parser 'pkcs8' registered
[ 38.133778] systemd[1]: Finished Load Kernel Modules.
[ 38.141440] systemd[1]: Condition check resulted in FUSE Control File System being skipped.
[ 38.141981] systemd[1]: Condition check resulted in Kernel Configuration File System being skipped.
[ 38.160140] systemd[1]: Starting Apply Kernel Variables...
[ 38.173067] systemd[1]: Finished File System Check on Root Device.
[ 38.191349] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 38.232712] systemd[1]: Finished Apply Kernel Variables.
[ 38.267388] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro
[ 38.275205] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 38.281045] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 38.281303] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 38.286881] systemd[1]: Starting Load/Save Random Seed...
[ 38.292588] systemd[1]: Starting Create System Users...
[ 38.398094] systemd[1]: Finished Create System Users.
[ 38.404254] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 38.474582] systemd[1]: Finished udev Coldplug all Devices.
[ 38.485757] systemd[1]: Starting Helper to synchronize boot up for ifupdown...
[ 38.489470] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 38.490767] systemd[1]: Reached target Local File Systems (Pre).
[ 38.500202] systemd[1]: Mounting /tmp...
[ 38.507438] systemd[1]: Starting udev Kernel Device Manager...
[ 38.511425] systemd[1]: Finished Helper to synchronize boot up for ifupdown.
[ 38.523515] systemd[1]: Mounted /tmp.
[ 38.524452] systemd[1]: Reached target Local File Systems.
[ 38.530636] systemd[1]: Starting Load AppArmor profiles...
[ 38.536638] systemd[1]: Starting Set console font and keymap...
[ 38.537291] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
[ 38.607467] systemd[1]: Finished Set console font and keymap.
[ 38.794308] audit: type=1400 audit(1587063324.096:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=575 comm="apparmor_parser"
[ 38.799348] audit: type=1400 audit(1587063324.100:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=576 comm="apparmor_parser"
[ 38.799368] audit: type=1400 audit(1587063324.100:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=576 comm="apparmor_parser"
[ 38.799859] systemd[1]: Started udev Kernel Device Manager.
[ 38.807236] systemd[1]: Starting Network Service...
[ 38.814487] audit: type=1400 audit(1587063324.116:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=577 comm="apparmor_parser"
[ 38.814509] audit: type=1400 audit(1587063324.116:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=577 comm="apparmor_parser"
[ 38.814521] audit: type=1400 audit(1587063324.116:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=577 comm="apparmor_parser"
[ 38.821233] systemd[1]: Finished Load AppArmor profiles.
[ 38.839123] systemd[1]: Starting Raise network interfaces...
[ 39.111368] systemd[1]: Finished Raise network interfaces.
[ 39.601787] lima 1c40000.gpu: IRQ ppmmu2 not found
[ 39.601802] lima 1c40000.gpu: IRQ ppmmu3 not found
[ 39.601824] lima 1c40000.gpu: gp - mali400 version major 1 minor 1
[ 39.601879] lima 1c40000.gpu: pp0 - mali400 version major 1 minor 1
[ 39.601924] lima 1c40000.gpu: pp1 - mali400 version major 1 minor 1
[ 39.601956] lima 1c40000.gpu: IRQ pp2 not found
[ 39.601964] lima 1c40000.gpu: IRQ pp3 not found
[ 39.601973] lima 1c40000.gpu: l2 cache 64K, 4-way, 64byte cache line, 64bit external bus
[ 39.611272] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[ 39.627554] systemd[1]: Found device /dev/ttyS0.
[ 39.628142] lima 1c40000.gpu: bus rate = 200000000
[ 39.628154] lima 1c40000.gpu: mod rate = 297000000
[ 39.628614] [drm] Initialized lima 1.0.0 20190217 for 1c40000.gpu on minor 0
[ 39.668403] sun4i-drm display-engine: bound 1100000.mixer (ops sun8i_mixer_platform_driver_exit [sun8i_mixer])
[ 39.671795] systemd[1]: Started Journal Service.
[ 39.739704] sun4i-drm display-engine: bound 1200000.mixer (ops sun8i_mixer_platform_driver_exit [sun8i_mixer])
[ 39.740380] sun4i-drm display-engine: No panel or bridge found... RGB output disabled
[ 39.740413] sun4i-drm display-engine: bound 1c0c000.lcd-controller (ops sun4i_tcon_platform_driver_exit [sun4i_tcon])
[ 39.740712] sun4i-drm display-engine: bound 1c0d000.lcd-controller (ops sun4i_tcon_platform_driver_exit [sun4i_tcon])
[ 39.744048] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 39.745279] cfg80211: Loaded X.509 cert 'benh at debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[ 39.745742] sun8i-dw-hdmi 1ee0000.hdmi: Detected HDMI TX controller v1.32a with HDCP (sun8i_dw_hdmi_phy)
[ 39.745796] input: axp20x-pek as /devices/platform/soc/1f03400.rsb/sunxi-rsb-3a3/axp221-pek/input/input0
[ 39.746623] cfg80211: Loaded X.509 cert 'romain.perier at gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[ 39.747809] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 39.763449] platform regulatory.0: firmware: direct-loading firmware regulatory.db
[ 39.765252] sun8i-dw-hdmi 1ee0000.hdmi: registered DesignWare HDMI I2C bus driver
[ 39.765271] axp20x-ac-power-supply axp20x-ac-power-supply: DMA mask not set
[ 39.765410] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s
[ 39.766060] sun4i-drm display-engine: bound 1ee0000.hdmi (ops sun8i_dw_hdmi_ops [sun8i_drm_hdmi])
[ 39.766070] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 39.766073] [drm] No driver support for vblank timestamp query.
[ 39.766637] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 1
[ 39.766716] [drm] Cannot find any crtc or sizes
[ 39.767638] [drm] Cannot find any crtc or sizes
[ 39.769337] axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set
[ 39.771756] axp20x-adc axp813-adc: DMA mask not set
[ 39.798553] systemd-journald[546]: Received client request to flush runtime journal.
[ 39.848731] r8723bs: module is from the staging directory, the quality is unknown, you have been warned.
[ 39.901562] RTL8723BS: module init start
[ 39.901574] RTL8723BS: rtl8723bs v4.3.5.5_12290.20140916_BTCOEX20140507-4E40
[ 39.901577] RTL8723BS: rtl8723bs BT-Coex version = BTCOEX20140507-4E40
[ 39.903721] pnetdev = (____ptrval____)
[ 39.998908] RTL8723BS: rtw_ndev_init(wlan0)
[ 40.019795] RTL8723BS: module init ret =0
[ 40.354080] random: crng init done
[ 40.354092] random: 7 urandom warning(s) missed due to ratelimiting
[ 40.943791] rtl8723bs: acquire FW from file:rtlwifi/rtl8723bs_nic.bin
[ 40.950162] rtl8723bs mmc1:0001:1: firmware: direct-loading firmware rtlwifi/rtl8723bs_nic.bin
[ 42.186147] NET: Registered protocol family 38
[ 42.288890] alg: No test for hmac(md4) (hmac(md4-generic))
[ 42.520562] dwmac-sun8i 1c30000.ethernet eth0: PHY [stmmac-0:01] driver [Micrel KSZ9031 Gigabit PHY]
[ 42.522413] dwmac-sun8i 1c30000.ethernet eth0: No Safety Features support found
[ 42.522430] dwmac-sun8i 1c30000.ethernet eth0: No MAC Management Counters available
[ 42.522438] dwmac-sun8i 1c30000.ethernet eth0: PTP not supported by HW
[ 42.522452] dwmac-sun8i 1c30000.ethernet eth0: configuring for phy/rgmii link mode
[ 43.582397] RTL8723BS: rtw_set_802_11_connect(wlan0) fw_state = 0x00000008
[ 43.941370] RTL8723BS: start auth
[ 43.948051] RTL8723BS: auth success, start assoc
[ 43.957325] RTL8723BS: rtw_cfg80211_indicate_connect(wlan0) BSS not found !!
[ 43.957353] RTL8723BS: assoc success
[ 43.993192] RTL8723BS: send eapol packet
[ 44.022394] RTL8723BS: send eapol packet
[ 44.024094] RTL8723BS: set group key camid:4, addr:e8:37:7a:cd:91:d1, kid:1, type:AES
[ 44.024159] RTL8723BS: set pairwise key camid:5, addr:e8:37:7a:cd:91:d1, kid:0, type:AES
[ 44.029634] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
More information about the U-Boot
mailing list